Namespace for OpenFOAM. More...
Classes | |
class | absoluteEnthalpy |
Thermodynamics mapping class to expose the absolute enthalpy functions. More... | |
class | absoluteInternalEnergy |
Thermodynamics mapping class to expose the absolute internal energy functions. More... | |
class | absorptionCoeffs |
Absorption coefficients class used in greyMean and wideBand absorptionEmission models. More... | |
class | aC10H7CH3 |
alphaMethylNaphthalene More... | |
class | accessOp |
class | activeBaffleVelocityFvPatchVectorField |
This velocity boundary condition simulates the opening of a baffle due to local flow conditions, by merging the behaviours of wall and cyclic conditions. The baffle joins two mesh regions, where the open fraction determines the interpolation weights applied to each cyclic- and neighbour-patch contribution. More... | |
class | activePressureForceBaffleVelocityFvPatchVectorField |
This boundary condition is applied to the flow velocity, to simulate the opening or closure of a baffle due to local pressure or force changes, by merging the behaviours of wall and cyclic conditions. More... | |
class | adaptiveLinear |
Produces a linear ramp which adapts its gradient to changes in endTime and deltaT to always arrive at the relaxationEnd value at the end of the run. More... | |
class | adaptiveSolver |
class | addPatchCellLayer |
Adds layers of cells to outside of polyPatch. Can optionally create stand-alone extruded mesh (addToMesh=false). More... | |
class | adiabaticPerfectFluid |
Adiabatic perfect fluid equation of state. More... | |
class | adjointOutletPressureFvPatchScalarField |
class | adjointOutletVelocityFvPatchVectorField |
class | adsorptionMassFractionFvPatchScalarField |
This is a mass-fraction boundary condition for an adsorbing wall. More... | |
class | advectiveFvPatchField |
This boundary condition provides an advective outflow condition, based on solving DDt(W, field) = 0 at the boundary where W is the wave velocity and field is the field to which this boundary condition is applied. More... | |
class | algebraicPairGAMGAgglomeration |
Agglomerate using the pair algorithm. More... | |
class | alphaContactAngleFvPatchScalarField |
Abstract base class for alphaContactAngle boundary conditions. More... | |
class | alphaFixedPressureFvPatchScalarField |
A fixed-pressure alphaContactAngle boundary. More... | |
class | AMIInterpolation |
Interpolation class dealing with transfer of data between two primitive patches with an arbitrary mesh interface (AMI). More... | |
class | AMIMethod |
Base class for Arbitrary Mesh Interface (AMI) methods. More... | |
class | Amultiplier |
class | andEqOp |
class | andEqOp2 |
class | andOp |
class | andOp2 |
class | andOp3 |
class | angularOscillatingDisplacementPointPatchVectorField |
Foam::angularOscillatingDisplacementPointPatchVectorField. More... | |
class | angularOscillatingVelocityPointPatchVectorField |
Foam::angularOscillatingVelocityPointPatchVectorField. More... | |
class | AnisothermalPhaseModel |
Class which represents a phase for which the temperature (strictly energy) varies. Returns the energy equation and corrects the thermodynamic model. More... | |
class | anisotropicFilter |
anisotropic filter More... | |
class | Ar |
Liquid Ar. More... | |
class | argList |
Extract command arguments and options from the supplied argc and argv parameters. More... | |
class | ArrheniusReactionRate |
Arrhenius reaction rate given by: More... | |
class | ash |
Coal ash solid properties. More... | |
class | aspectRatioModel |
class | atmBoundaryLayer |
This class provides functions to evaluate the velocity and turbulence distributions appropriate for atmospheric boundary layers (ABL). More... | |
class | atmBoundaryLayerInletEpsilonFvPatchScalarField |
This boundary condition specifies an inlet value for the turbulence dissipation, , appropriate for atmospheric boundary layers. More... | |
class | atmBoundaryLayerInletKFvPatchScalarField |
This boundary condition specifies an inlet value for the turbulence kinetic energy, , appropriate for atmospheric boundary layers. More... | |
class | atmBoundaryLayerInletVelocityFvPatchVectorField |
This boundary condition specifies a velocity inlet profile appropriate for atmospheric boundary layers (ABL). More... | |
class | atomicWeightTable |
A table of atomic weights for all the elements. More... | |
class | AtomisationModel |
Templated atomisation model class. More... | |
class | attachDetach |
Attach/detach boundary mesh modifier. This modifier takes a set of internal faces and converts them into boundary faces and vice versa based on the given activation switch. More... | |
class | attachPolyTopoChanger |
This class is derived from polyMesh and serves as a tool for statically connecting pieces of a mesh by executing the mesh modifiers and cleaning the mesh. More... | |
class | autoDensity |
Choose random points inside the domain and place them with a probability proportional to the target density of points. More... | |
class | automatic |
class | autoPtr |
An auto-pointer similar to the STL auto_ptr but with automatic casting to a reference to the type and with pointer allocation checking on access. More... | |
class | AverageField |
A primitive field with a separate average value. More... | |
class | AveragingMethod |
Base class for lagrangian averaging methods. More... | |
class | axesRotation |
A coordinate rotation specified using global axis. More... | |
class | backgroundMeshDecomposition |
Store a background polyMesh to use for the decomposition of space and queries for parallel conformalVoronoiMesh. More... | |
class | badQualityToCell |
Selects bad quality cells (using snappyHexMesh/cvMesh mesh quality selector) More... | |
class | badQualityToFace |
Selects bad quality faces (using snappyHexMesh/cvMesh mesh quality selector) More... | |
class | barotropicCompressibilityModel |
Abstract class for barotropic compressibility models. More... | |
class | Barycentric |
Templated 3D Barycentric derived from VectorSpace. Has 4 components, one of which is redundant. More... | |
class | Barycentric2D |
Templated 2D Barycentric derived from VectorSpace. Has 3 components, one of which is redundant. More... | |
class | BarycentricTensor |
Templated 4x3 tensor derived from VectorSpace. Has 12 components. Can represent a barycentric transformation as a matrix-barycentric inner- product. Can alternatively represent an inverse barycentric transformation as a vector-matrix inner-product. More... | |
class | BarycentricTensor2D |
Templated 3x3 tensor derived from VectorSpace. Has 9 components. Can represent a barycentric transformation as a matrix-barycentric inner- product. Can alternatively represent an inverse barycentric transformation as a vector-matrix inner-product. More... | |
class | basicChemistryModel |
Base class for chemistry models. More... | |
class | basicCombustionMixture |
Specialisation of the basicMixture for combustion. More... | |
class | basicMixture |
Foam::basicMixture. More... | |
class | basicSpecieMixture |
Specialisation of basicMixture for a mixture consisting of a number for molecular species. More... | |
class | basicSymmetryFvPatchField |
A symmetry patch. More... | |
class | basicSymmetryPointPatchField |
A Symmetry boundary condition for pointField. More... | |
class | basicThermo |
Base-class for fluid and solid thermodynamic properties. More... | |
class | bC10H7CH3 |
betaMethylNaphthalene More... | |
class | BiIndirectList |
Indexes into negList (negative index) or posList (zero or positive index). More... | |
class | biLinearFitPolynomial |
BiLinear polynomial for interpolation fitting. More... | |
class | BinaryCollisionModel |
Templated DSMC particle collision class. More... | |
class | binaryNode |
Node of the binary tree. More... | |
class | binaryTree |
Data storage of the chemistryOnLineLibrary according to a binary tree structure. More... | |
class | BinSum |
Sums into bins. More... | |
class | bladeModel |
Blade model class calculates: Linear interpolated blade twist and chord based on radial position Interpolation factor (for interpolating profile performance) More... | |
class | blended |
linear/upwind blended differencing scheme. More... | |
class | BlendedInterfacialModel |
class | blendedSchemeBase |
Base class for blended schemes to provide access to the blending factor surface field. More... | |
class | blendingMethod |
class | BlobsSheetAtomisation |
Primary Breakup Model for pressure swirl atomisers. More... | |
class | block |
Creates a single block of cells from point coordinates, numbers of cells in each direction and an expansion ratio. More... | |
class | blockDescriptor |
Takes the description of the block and the list of curved edges and creates a list of points on edges together with the weighting factors. More... | |
class | blockEdge |
Define a curved edge that is parameterised for 0<lambda<1 between the start and end point. More... | |
class | blockFace |
Define a curved face. More... | |
class | blockMesh |
A multi-block mesh generator. More... | |
class | blockVertex |
Define a block vertex. More... | |
class | bodyCentredCubic |
Generate a BCC lattice of points inside the surfaces to be conformed to of the conformalVoronoiMesh. More... | |
class | booleanSurface |
Surface-surface intersection. Given two surfaces construct combined surface. More... | |
class | boundaryCutter |
Does modifications to boundary faces. More... | |
class | boundaryRegion |
The boundaryRegion persistent data saved as a Map<dictionary>. More... | |
class | boundaryToFace |
A topoSetSource to select all external (boundary) faces. More... | |
class | boundBox |
A bounding box defined in terms of the points at its extremities. More... | |
class | Boussinesq |
Incompressible gas equation of state using the Boussinesq approximation for the density as a function of temperature only: More... | |
class | boxToCell |
A topoSetSource to select cells based on cell centres inside box(es). More... | |
class | boxToFace |
A topoSetSource to select faces based on face centres inside box. More... | |
class | boxToPoint |
A topoSetSource to select points based on whether they are inside box. More... | |
class | BreakupModel |
Templated break-up model class. More... | |
class | BrownianMotionForce |
Calculates particle Brownian motion force. More... | |
class | BSpline |
An implementation of B-splines. More... | |
class | bufferedAccumulator |
class | C |
Graphite solid properties. More... | |
class | C10H22 |
nDecane More... | |
class | C12H26 |
nDodecane More... | |
class | C13H28 |
nTriDecane More... | |
class | C14H30 |
nTetraDecane More... | |
class | C16H34 |
nHexaDecane More... | |
class | C2H5OH |
ethanol More... | |
class | C2H6 |
ethane More... | |
class | C2H6O |
diMethylEther More... | |
class | C3H6O |
acetone More... | |
class | C3H8 |
propane More... | |
class | C4H10O |
diEthylEther More... | |
class | C6H14 |
nHexane More... | |
class | C6H6 |
benzene More... | |
class | C7H16 |
nHeptane More... | |
class | C7H8 |
toluene More... | |
class | C8H10 |
ethylBenzene More... | |
class | C8H18 |
nOctane More... | |
class | C9H20 |
nNonane More... | |
class | CaCO3 |
Calcium carbonate (limestone) More... | |
class | calculatedFvPatchField |
This boundary condition is not designed to be evaluated; it is assumed that the value is assigned via field assignment, and not via a call to e.g. updateCoeffs or evaluate . More... | |
class | calculatedFvsPatchField |
Foam::calculatedFvsPatchField. More... | |
class | calculatedPointPatchField |
A calculated boundary condition for pointField. More... | |
class | Callback |
Abstract class to handle automatic call-back registration with the CallbackRegistry. Derive from this class and extend by adding the appropriate callback functions. More... | |
class | CallbackRegistry |
Base class with which callbacks are registered. More... | |
class | CatmullRomSpline |
An implementation of Catmull-Rom splines (sometimes known as Overhauser splines). More... | |
class | CECCellToCellStencil |
class | CECCellToFaceStencil |
Combined corresponding cellToCellStencil of owner and neighbour. More... | |
class | cell |
A cell is defined as a list of faces with extra functionality. More... | |
class | cellAspectRatioControl |
class | cellClassification |
'Cuts' a mesh with a surface. More... | |
class | cellCoBlended |
Two-scheme cell-based Courant number based blending differencing scheme. More... | |
class | cellCuts |
Description of cuts across cells. More... | |
class | cellDistFuncs |
Collection of functions used in wall distance calculation. More... | |
class | cellFeatures |
Cell analysis class. More... | |
class | cellInfo |
Holds information regarding type of cell. Used in inside/outside determination in cellClassification. More... | |
class | cellLooper |
Abstract base class. Concrete implementations know how to cut a cell (i.e. determine a loop around the circumference). More... | |
class | cellMapper |
This object provides mapping and fill-in information for cell data between the two meshes after the topological change. It is constructed from mapPolyMesh. More... | |
class | cellMatcher |
Base class for cellshape matchers (hexMatch, prismMatch, etc.). These are classes which given a mesh and cell number find out the orientation of the cellShape and construct cell-vertex to mesh-vertex mapping and cell-face to mesh-face mapping. More... | |
class | cellModel |
Maps a geometry to a set of cell primitives, which enables geometric cell data to be calculated without access to the primitive geometric level. This means mapping a 3D geometry to a set of pyramids which are each described by a cell face and the cell centre point. More... | |
class | cellModeller |
A static collection of cell models, and a means of looking them up. More... | |
class | cellMotionFvPatchField |
Foam::cellMotionFvPatchField. More... | |
class | cellPointWeight |
Foam::cellPointWeight. More... | |
class | cellQuality |
Class calculates cell quality measures. More... | |
class | cellSet |
A collection of cell labels. More... | |
class | cellSets |
class | cellShape |
An analytical geometric cellShape. More... | |
class | cellShapeControl |
class | cellShapeControlMesh |
class | cellSizeAndAlignmentControl |
class | cellSizeAndAlignmentControls |
class | cellSizeCalculationType |
Abstract base class for specifying target cell sizes. More... | |
class | cellSizeFunction |
Abstract base class for specifying target cell sizes. More... | |
class | cellSplitter |
Does pyramidal decomposition of selected cells. So all faces will become base of pyramid with as top a user-supplied point (usually the cell centre) More... | |
class | cellTable |
The cellTable persistent data saved as a Map<dictionary>. More... | |
class | cellToCell |
A topoSetSource to select the cells from another cellSet. More... | |
class | cellToCellStencil |
baseclass for extended cell centred addressing. Contains per cell a list of neighbouring cells and/or boundaryfaces in global addressing. More... | |
class | cellToFace |
A topoSetSource to select a faceSet from cells. More... | |
class | cellToFaceStencil |
Base class for extended cell-to-face stencils (face values from neighbouring cells) More... | |
class | cellToPoint |
A topoSetSource to select points based on usage in cells. More... | |
class | cellVolumeWeightMethod |
Cell-volume-weighted mesh-to-mesh interpolation class. More... | |
class | cellZone |
A subset of mesh cells. More... | |
class | CellZoneInjection |
Injection positions specified by a particle number density within a cell set. More... | |
class | cellZoneSet |
Like cellSet but -reads data from cellZone -updates cellZone when writing. More... | |
class | centredCECCellToCellStencilObject |
class | centredCECCellToFaceStencilObject |
class | centredCFCCellToCellStencilObject |
class | centredCFCCellToFaceStencilObject |
class | centredCFCFaceToCellStencilObject |
class | centredCPCCellToCellStencilObject |
class | centredCPCCellToFaceStencilObject |
class | centredFECCellToFaceStencilObject |
class | CentredFitData |
Data for the quadratic fit correction interpolation scheme. More... | |
class | CentredFitScheme |
Centred fit surface interpolation scheme which applies an explicit correction to linear. More... | |
class | CentredFitSnGradData |
Data for centred fit snGrad schemes. More... | |
class | CFCCellToCellStencil |
class | CFCCellToFaceStencil |
Combined corresponding cellToCellStencil of owner and neighbour. More... | |
class | CFCFaceToCellStencil |
class | CH3OH |
methanol More... | |
class | CH4N2O |
urea, note that some of the properties are unavailable in the literature and have been copied from water. More... | |
class | channelIndex |
Does averaging of fields over layers of cells. Assumes layered mesh. More... | |
class | ChemicallyActivatedReactionRate |
General class for handling chemically-activated bimolecular reactions. More... | |
class | chemistryReductionMethod |
An abstract class for methods of chemical mechanism reduction. More... | |
class | chemistrySolver |
An abstract base class for solving chemistry. More... | |
class | chemistryTabulationMethod |
An abstract class for chemistry tabulation. More... | |
class | chemkinReader |
Foam::chemkinReader. More... | |
class | chemPointISAT |
Leaf of the binary tree. The chemPoint stores the composition 'phi', the mapping of this composition Rphi, the mapping gradient matrix A and the matrix describing the Ellipsoid Of Accuracy (EOA). More... | |
class | Circulator |
Walks over a container as if it were circular. The container must have the following members defined: More... | |
class | CirculatorBase |
Base class for circulators. More... | |
class | clippedLinear |
Central-differencing interpolation scheme using clipped-weights to improve stability on meshes with very rapid variations in cell size. More... | |
class | clock |
Read access to the system clock with formatting. More... | |
class | clockTime |
Starts timing (using rtc) and returns elapsed time from start. Better resolution (2uSec instead of ~20mSec) than cpuTime. More... | |
class | closedTriSurfaceMesh |
A triSurfaceMesh where it is forced to check volumeTypes, used for surfaces that are topologically non-manifold (small holes or multiple parts) but are geometrically essentially closed. More... | |
class | Cloud |
Base cloud calls templated on particle type. More... | |
class | cloud |
A cloud is a collection of lagrangian particles. More... | |
class | CloudFunctionObject |
Templated cloud function object base class. More... | |
class | CloudFunctionObjectList |
List of cloud function objects. More... | |
class | cloudSolution |
Stores all relevant solution info for cloud. More... | |
class | CloudSubModelBase |
Base class for cloud sub-models. More... | |
class | cmptDivideOp |
class | cmptDivideOp2 |
class | cmptDivideOp3 |
class | cmptMultiplyOp |
class | cmptMultiplyOp2 |
class | cmptMultiplyOp3 |
class | cmptPowOp |
class | cmptPowOp2 |
class | cmptPowOp3 |
class | CoBlended |
Two-scheme Courant number based blending differencing scheme. More... | |
class | codedBase |
Base class for function objects and boundary conditions using dynamic code. More... | |
class | codedFixedValueFvPatchField |
Constructs on-the-fly a new boundary condition (derived from fixedValueFvPatchField) which is then used to evaluate. More... | |
class | codedFixedValuePointPatchField |
Constructs on-the-fly a new boundary condition (derived from fixedValuePointPatchField) which is then used to evaluate. More... | |
class | codedFunctionObject |
Provides a general interface to enable dynamic code compilation. More... | |
class | codedMixedFvPatchField |
Constructs on-the-fly a new boundary condition (derived from mixedFvPatchField) which is then used to evaluate. More... | |
class | coefficientMultiComponentMixture |
Thermophysical properties mixing class which applies mass-fraction weighted mixing to the thermodynamic and transport coefficients. More... | |
class | coefficientWilkeMultiComponentMixture |
Thermophysical properties mixing class which applies mass-fraction weighted mixing to the thermodynamic coefficients and Wilke's equation to transport properties. More... | |
class | collidingCloud |
Cloud class to introduce colliding parcels. More... | |
class | CollidingCloud |
Adds collisions to clouds. More... | |
class | collidingParcel |
Definition of colliding parcel. More... | |
class | CollidingParcel |
Wrapper around parcel types to add collision modelling. More... | |
class | CollisionModel |
Templated collision model class. More... | |
class | CollisionRecordList |
class | combine |
class | combineConstraintsEqOp |
Reduce operator. More... | |
class | combineEqOp |
Reduction class. If x and y are not equal assign value. More... | |
class | combineFaces |
Combines boundary faces into single face. The faces get the patch of the first face ('the master') More... | |
class | combineReduceFileStates |
Combine operator for PackedList of fileState. More... | |
class | combustionModel |
Base class for combustion models. More... | |
class | commSchedule |
Determines the order in which a set of processors should communicate with one another. More... | |
class | CompactIOField |
A Field of objects of type <T> with automated input and output using a compact storage. Behaves like IOField except when binary output in case it writes a CompactListList. More... | |
class | CompactIOList |
A List of objects of type <T> with automated input and output using a compact storage. Behaves like IOList except when binary output in case it writes a CompactListList. More... | |
class | CompactListList |
A packed storage unstructured matrix of objects of type <T> using an offset table for access. More... | |
class | CompactSpatialTensor |
Templated 3D compact spatial tensor derived from MatrixSpace used to represent transformations of spatial vectors and the angular and linear inertia of rigid bodies. More... | |
class | CompactSpatialTensorT |
Templated 3D transposed compact spatial tensor derived from MatrixSpace used to represent transformations of spatial vectors of rigid bodies. More... | |
class | compileTemplate |
class | complex |
Extension to the c++ complex library type. More... | |
class | componentDisplacementMotionSolver |
Virtual base class for displacement motion solver. More... | |
class | componentVelocityMotionSolver |
Virtual base class for velocity motion solver. More... | |
class | CompositionModel |
Templated reacting parcel composition model class Consists of carrier species (via thermo package), and additional liquids and solids. More... | |
class | compressibleInterPhaseTransportModel |
Transport model selection class for the compressibleInterFoam family of solvers. More... | |
class | CompressibleMomentumTransportModel |
Templated abstract base class for single-phase compressible turbulence models. More... | |
class | compressibleMomentumTransportModel |
Abstract base class for turbulence models (RAS, LES and laminar). More... | |
class | ConeInjection |
This injector injects particles in a number of cones. The user specifies a position and a direction to inject at, and two angles to inject between. Optionally, this injector can introduce particles over a disc, instead of at a point, in which case inner and outer diameters of the disc are also specified. More... | |
class | conformalVoronoiMesh |
class | conformationSurfaces |
class | constAnIsoSolidTransport |
Constant properties Transport package. Templated into a given Thermodynamics package (needed for thermal conductivity). More... | |
class | constantAlphaContactAngleFvPatchScalarField |
A constant alphaContactAngle scalar boundary condition. More... | |
class | ConstantRateDevolatilisation |
Constant rate devolatisation model. More... | |
class | ConstCirculator |
Walks over a container as if it were circular. The container must have the following members defined: More... | |
class | constIsoSolidTransport |
Constant properties Transport package. Templated into a given thermodynamics package (needed for thermal conductivity). More... | |
class | ConstMatrixBlock |
class | constrainHbyA |
class | constrainPressure |
class | constTransport |
Constant properties Transport package. Templated into a given thermodynamics package (needed for thermal conductivity). More... | |
class | consumptionSpeed |
Correlation function for laminar consumption speed obtained from flamelet solution at increasing strain rates. More... | |
class | controlMeshRefinement |
class | convergenceControl |
Convergence control class. Provides methods to check the convergence of the time loop against an absolute residual tolerance. More... | |
class | coordinateRotation |
Abstract base class for coordinate rotation. More... | |
class | coordinateSystem |
Base class for other coordinate system specifications. More... | |
class | coordSet |
Holds list of sampling positions. More... | |
class | copiedFixedValueFvPatchScalarField |
Copies the boundary values from a user specified field. More... | |
class | CorrectionLimitingMethod |
Base class for correction limiting methods. More... | |
class | correctorConvergenceControl |
Corrector convergence control class. Provides methods to check the convergence of an inner iteration loop (e.g., pimple) against both absolute and relative residual tolerances. More... | |
class | CorrectPhi |
Flux correction functions to ensure continuity. More... | |
class | correlationFunction |
class | coupledFacePair |
Data associated with a pair of coupled faces. More... | |
class | coupledFacePointPatch |
coupled patch for post-processing. Used as the base class for processor and cyclic pointPatches More... | |
class | coupledFvPatch |
An abstract base class for patches that couple regions of the computational domain e.g. cyclic and processor-processor links. More... | |
class | coupledFvPatchField |
Abstract base class for coupled patches. More... | |
class | coupledFvsPatchField |
Foam::coupledFvsPatchField. More... | |
class | coupledPointPatch |
coupled patch for post-processing. Used as the base class for processor and cyclic pointPatches More... | |
class | coupledPointPatchField |
A Coupled boundary condition for pointField. More... | |
class | coupledPolyPatch |
The coupledPolyPatch is an abstract base class for patches that couple regions of the computational domain e.g. cyclic and processor-processor links. More... | |
class | coupleGroupIdentifier |
Encapsulates using patchGroups to specify coupled patch. More... | |
class | COxidationDiffusionLimitedRate |
Diffusion limited rate surface reaction model for coal parcels. Limited to: More... | |
class | COxidationHurtMitchell |
Char oxidation model given by Hurt and Mitchell: More... | |
class | COxidationIntrinsicRate |
Intrinsic char surface reaction mndel. More... | |
class | COxidationKineticDiffusionLimitedRate |
Kinetic/diffusion limited rate surface reaction model for coal parcels. Limited to: More... | |
class | COxidationMurphyShaddix |
Limited to C(s) + O2 -> CO2. More... | |
class | CPCCellToCellStencil |
class | CPCCellToFaceStencil |
Combined corresponding cellToCellStencil of owner and neighbour. More... | |
class | cpuTime |
Starts timing CPU usage and return elapsed time from start. More... | |
class | crankConRod |
Manage time in terms of engine RPM and crank-angle. More... | |
class | createShellMesh |
Creates mesh by extruding a patch. More... | |
class | crossProduct |
class | csvSetWriter |
Write set in csv format. More... | |
class | cubic |
Cubic interpolation scheme class derived from linear and returns linear weighting factors but also applies an explicit correction. More... | |
class | cubicEqn |
Cubic equation of the form a*x^3 + b*x^2 + c*x + d = 0. More... | |
class | cubicUpwindFitPolynomial |
Cubic polynomial for upwind biased interpolation fitting. More... | |
class | curve |
A single curve in a graph. More... | |
class | CuthillMcKeeRenumber |
Cuthill-McKee renumbering. More... | |
class | cuttingPlane |
Constructs plane through mesh. More... | |
class | CV2D |
Conformal-Voronoi 2D automatic mesher with grid or read initial points and point position relaxation with optional "squarification". More... | |
class | cv2DControls |
Controls for the 2D CV mesh generator. More... | |
class | cvControls |
Controls for the conformalVoronoiMesh mesh generator. More... | |
class | cyclicACMIFvPatch |
Cyclic patch for Arbitrarily Coupled Mesh Interface (ACMI) More... | |
class | cyclicACMIFvPatchField |
This boundary condition enforces a cyclic condition between a pair of boundaries, whereby communication between the patches is performed using an arbitrarily coupled mesh interface (ACMI) interpolation. More... | |
class | cyclicACMIFvsPatchField |
Foam::cyclicACMIFvsPatchField. More... | |
class | cyclicACMIGAMGInterface |
GAMG agglomerated cyclic ACMI interface. More... | |
class | cyclicACMIGAMGInterfaceField |
GAMG agglomerated cyclic interface for Arbitrarily Coupled Mesh Interface (ACMI) fields. More... | |
class | cyclicACMILduInterface |
An abstract base class for cyclic ACMI coupled interfaces. More... | |
class | cyclicACMILduInterfaceField |
Abstract base class for cyclic ACMI coupled interfaces. More... | |
class | cyclicACMIPointPatch |
Cyclic AMI point patch - place holder only. More... | |
class | cyclicACMIPointPatchField |
Cyclic ACMI front and back plane patch field. More... | |
class | cyclicACMIPolyPatch |
Cyclic patch for Arbitrarily Coupled Mesh Interface (ACMI) More... | |
class | cyclicAMIFvPatch |
Cyclic patch for Arbitrary Mesh Interface (AMI) More... | |
class | cyclicAMIFvPatchField |
This boundary condition enforces a cyclic condition between a pair of boundaries, whereby communication between the patches is performed using an arbitrary mesh interface (AMI) interpolation. More... | |
class | cyclicAMIFvsPatchField |
Foam::cyclicAMIFvsPatchField. More... | |
class | cyclicAMIGAMGInterface |
GAMG agglomerated cyclic AMI interface. More... | |
class | cyclicAMIGAMGInterfaceField |
GAMG agglomerated cyclic interface field. More... | |
class | cyclicAMILduInterface |
An abstract base class for cyclic AMI coupled interfaces. More... | |
class | cyclicAMILduInterfaceField |
Abstract base class for cyclic AMI coupled interfaces. More... | |
class | cyclicAMIPointPatch |
Cyclic AMI point patch - place holder only. More... | |
class | cyclicAMIPointPatchField |
Cyclic AMI front and back plane patch field. More... | |
class | cyclicAMIPolyPatch |
Cyclic patch for Arbitrary Mesh Interface (AMI) More... | |
class | cyclicFvPatch |
Cyclic-plane patch. More... | |
class | cyclicFvPatchField |
This boundary condition enforces a cyclic condition between a pair of boundaries. More... | |
class | cyclicFvsPatchField |
Foam::cyclicFvsPatchField. More... | |
class | cyclicGAMGInterface |
GAMG agglomerated cyclic interface. More... | |
class | cyclicGAMGInterfaceField |
GAMG agglomerated cyclic interface field. More... | |
class | cyclicLduInterface |
An abstract base class for cyclic coupled interfaces. More... | |
class | cyclicLduInterfaceField |
Abstract base class for cyclic coupled interfaces. More... | |
class | cyclicPointPatch |
Cyclic patch for post-processing. More... | |
class | cyclicPointPatchField |
Cyclic front and back plane patch field. More... | |
class | cyclicPolyPatch |
Cyclic plane patch. More... | |
class | cyclicRepeatAMIFvPatch |
Repeating patch for Arbitrary Mesh Interface (AMI) More... | |
class | cyclicRepeatAMIFvPatchField |
This boundary condition enforces an repeating condition between a pair of boundaries, whereby communication between the patches is performed using an arbitrary mesh interface (AMI) interpolation. More... | |
class | cyclicRepeatAMIFvsPatchField |
Foam::cyclicRepeatAMIFvsPatchField. More... | |
class | cyclicRepeatAMIGAMGInterface |
GAMG agglomerated repeat AMI interface. More... | |
class | cyclicRepeatAMIGAMGInterfaceField |
GAMG agglomerated repeat AMI interface field. More... | |
class | cyclicRepeatAMILduInterface |
An abstract base class for overlapping AMI coupled interfaces. More... | |
class | cyclicRepeatAMILduInterfaceField |
Abstract base class for overlapping AMI coupled interfaces. More... | |
class | cyclicRepeatAMIPointPatch |
Repeat AMI point patch - place holder only. More... | |
class | cyclicRepeatAMIPointPatchField |
Repeat AMI front and back plane patch field. More... | |
class | cyclicRepeatAMIPolyPatch |
Repeat patch for Arbitrary Mesh Interface (AMI) More... | |
class | cyclicSlipFvPatch |
Cyclic-plane patch. More... | |
class | cyclicSlipFvPatchField |
This boundary condition is a light wrapper around the cyclicFvPatchField condition, providing no new functionality. More... | |
class | cyclicSlipFvsPatchField |
Foam::cyclicSlipFvsPatchField. More... | |
class | cyclicSlipPointPatch |
Cyclic patch with slip constraint. More... | |
class | cyclicSlipPointPatchField |
Cyclic + slip constraints. More... | |
class | cyclicSlipPolyPatch |
Copy of cyclicSlip - used to be able to instantiate cyclicSlip pointPatch which is cyclicSlip with slip constraints. More... | |
class | cyclicTransform |
Cyclic plane tranformation. More... | |
class | cylinderAnnulusToCell |
A topoSetSource to select cells based on cell centres inside a cylinder annulus. More... | |
class | cylinderAnnulusToFace |
A topoSetSource to select faces based on face centres inside a cylinder annulus. More... | |
class | cylinderToCell |
A topoSetSource to select cells based on cell centres inside a cylinder. More... | |
class | cylinderToFace |
A topoSetSource to select faces based on face centres inside a cylinder. More... | |
class | cylindrical |
A local coordinate rotation. More... | |
class | cylindricalInletVelocityFvPatchVectorField |
This boundary condition describes an inlet vector boundary condition in cylindrical co-ordinates given a central axis, central point, rpm, axial and radial velocity. More... | |
class | DampingModel |
Base class for collisional damping models. More... | |
class | data |
Database for solution and other reduced data. More... | |
class | decomposedBlockData |
decomposedBlockData is a List<char> with IO on the master processor only. More... | |
class | decompositionConstraint |
class | decompositionMethod |
Abstract base class for decomposition. More... | |
class | decompositionModel |
MeshObject wrapper of decompositionMethod. More... | |
class | deferred |
Deferred correction interpolation scheme derived from upwind which returns upwind weighting factors and an explicit correction obtained from the specified scheme. More... | |
class | degenerateMatcher |
Collection of all hex degenerate matchers (hex, wedge, prism etc.) Has static member function to match a shape. More... | |
class | DelaunayMesh |
The vertex and cell classes must have an index defined. More... | |
class | DelaunayMeshTools |
Collection of functions for operating on a Delaunay mesh. Includes: More... | |
class | demandDrivenEntry |
Class for demand-driven dictionary entries. More... | |
class | DenseDragForce |
class | DevolatilisationModel |
Templated devolatilisation model class. More... | |
class | DiagonalMatrix |
DiagonalMatrix<Type> is a 2D diagonal matrix of objects of type Type, size nxn. More... | |
class | DiagonalPreconditioner |
Diagonal preconditioner for both symmetric and asymmetric matrices. More... | |
class | diagonalPreconditioner |
Diagonal preconditioner for both symmetric and asymmetric matrices. More... | |
class | DiagonalSolver |
Foam::DiagonalSolver. More... | |
class | diagonalSolver |
Foam::diagonalSolver. More... | |
class | DiagTensor |
Templated 3D DiagTensor derived from VectorSpace. More... | |
class | diameterModel |
Abstract base-class for dispersed-phase particle diameter models. More... | |
class | DICGaussSeidelSmoother |
Combined DIC/GaussSeidel smoother for symmetric matrices in which DIC smoothing is followed by GaussSeidel to ensure that any "spikes" created by the DIC sweeps are smoothed-out. More... | |
class | DICPreconditioner |
Simplified diagonal-based incomplete Cholesky preconditioner for symmetric matrices (symmetric equivalent of DILU). The reciprocal of the preconditioned diagonal is calculated and stored. More... | |
class | DICSmoother |
Simplified diagonal-based incomplete Cholesky smoother for symmetric matrices. More... | |
class | dictionary |
A list of keyword definitions, which are a keyword followed by any number of values (e.g. words and numbers). The keywords can represent patterns which are matched using Posix regular expressions. The general order for searching is as follows: More... | |
class | Dictionary |
Gerneral purpose template dictionary class which manages the storage associated with it. More... | |
class | DictionaryBase |
Base dictionary class templated on both the form of doubly-linked list it uses as well as the type it holds. More... | |
class | dictionaryEntry |
A keyword and a list of tokens is a 'dictionaryEntry'. More... | |
class | dictionaryListEntry |
Read/write List of dictionaries. More... | |
class | dictionaryName |
class | diffusiveMassTransferModel |
class | DILUGaussSeidelSmoother |
Combined DILU/GaussSeidel smoother for asymmetric matrices in which DILU smoothing is followed by GaussSeidel to ensure that any "spikes" created by the DILU sweeps are smoothed-out. More... | |
class | DILUPreconditioner |
Simplified diagonal-based incomplete LU preconditioner for asymmetric matrices. The reciprocal of the preconditioned diagonal is calculated and stored. More... | |
class | DILUSmoother |
Simplified diagonal-based incomplete LU smoother for asymmetric matrices. More... | |
class | dimensioned |
Generic dimensioned Type class. More... | |
class | DimensionedField |
Field with dimensions and associated with geometry type GeoMesh which is used to size the field and a reference to it is maintained. More... | |
class | dimensionSet |
Dimension set for the base types. More... | |
class | dimensionSets |
class | dimFieldDecomposer |
Dimensioned field decomposer. More... | |
class | directAMI |
Direct mapped Arbitrary Mesh Interface (AMI) method. More... | |
class | directFieldMapper |
Direct field mapper. More... | |
class | directFvPatchFieldMapper |
direct fvPatchFieldMapper More... | |
class | directionalDiffusivity |
Directional finite volume mesh motion diffusivity. More... | |
class | directionInfo |
Holds direction in which to split cell (in fact a local coordinate axes). Information is a label and a direction. More... | |
class | directionMixedFvPatchField |
Base class for direction-mixed boundary conditions. More... | |
class | directions |
Set of directions for each cell in the mesh. Either uniform and size=1 or one set of directions per cell. More... | |
class | directMethod |
Direct (one-to-one cell correspondence) mesh-to-mesh interpolation class. More... | |
class | directPointPatchFieldMapper |
direct PointPatchFieldMapper More... | |
class | DispersionModel |
class | DispersionRASModel |
Base class for particle dispersion models based on RAS turbulence. More... | |
class | displacementComponentLaplacianFvMotionSolver |
Mesh motion solver for an fvMesh. Based on solving the cell-centre Laplacian for the given component of the motion displacement. More... | |
class | displacementLaplacianFvMotionSolver |
Mesh motion solver for an fvMesh. Based on solving the cell-centre Laplacian for the motion displacement. More... | |
class | displacementLayeredMotionMotionSolver |
Mesh motion solver for an (multi-block) extruded fvMesh. Gets given the structure of the mesh blocks and boundary conditions on these blocks. More... | |
class | displacementLinearMotionMotionSolver |
Mesh motion solver simple linear expansion and contraction of a mesh region defined by a motion axis and the extents of the motion. More... | |
class | displacementMeshMoverMotionSolver |
Mesh motion solver for an fvMesh. Based on solving the cell-centre Laplacian for the motion displacement. More... | |
class | displacementMotionSolver |
Virtual base class for displacement motion solver. More... | |
class | displacementSBRStressFvMotionSolver |
Mesh motion solver for an fvMesh. Based on solving the cell-centre solid-body rotation stress equations for the motion displacement. More... | |
class | DistortedSphereDragForce |
Drag model for distorted spheres. More... | |
class | DistributedDelaunayMesh |
class | distributedTriSurfaceMesh |
IOoject and searching on distributed triSurface. All processor hold (possibly overlapping) part of the overall surface. All queries are distributed to the processor that can answer it and the result sent back. More... | |
class | distributedWeightedFvPatchFieldMapper |
FieldMapper with weighted mapping from (optionally remote) quantities. More... | |
class | distribution |
Accumulating histogram of values. Specified bin resolution automatic generation of bins. More... | |
class | Distribution |
Accumulating histogram of component values. Specified bin resolution, automatic generation of bins. More... | |
class | distributionModel |
A library of runtime-selectable distribution models. More... | |
class | divideEqOp |
class | divideEqOp2 |
class | divideOp |
class | divideOp2 |
class | divideOp3 |
class | dlLibraryTable |
A table of dynamically loaded libraries. More... | |
class | DLListBase |
Base doubly-linked list. More... | |
class | domainDecomposition |
Automatic domain decomposition class for finite-volume meshes. More... | |
class | downwind |
Downwind differencing scheme class. More... | |
class | dragModel |
class | DSMCCloud |
Templated base class for dsmc cloud. More... | |
class | dsmcCloud |
Cloud class to simulate dsmc parcels. More... | |
class | DSMCParcel |
DSMC parcel class. More... | |
class | dummyAgglomeration |
Agglomerate without combining cells. Used for testing. More... | |
class | dummyISstream |
Dummy stream for input. Aborts at any attempt to read from it. More... | |
class | dummyIstream |
Dummy stream for input. Aborts at any attempt to read from it. More... | |
class | dummyTransform |
class | duplicatePoints |
Duplicate points. More... | |
class | dynamicAlphaContactAngleFvPatchScalarField |
A dynamic alphaContactAngle scalar boundary condition. More... | |
class | dynamicCode |
Tools for handling dynamic code compilation. More... | |
class | dynamicCodeContext |
Encapsulation of dynamic code dictionaries. More... | |
class | DynamicField |
Dynamically sized Field. More... | |
class | dynamicFvMesh |
Abstract base class for geometry and/or topology changing fvMesh. More... | |
class | DynamicID |
A class that holds the data needed to identify things (zones, patches) in a dynamic mesh. More... | |
class | dynamicIndexedOctree |
Non-pointer based hierarchical recursive searching. Storage is dynamic, so elements can be deleted. More... | |
class | dynamicInkJetFvMesh |
Mesh motion specifically for the "pumping" system of an ink-jet injector. More... | |
class | dynamicInterpolatedFvMesh |
Interpolates pre-specified motion specified as a set of pointVectorFields. More... | |
class | DynamicList |
A 1D vector of objects of type <T> that resizes itself as necessary to accept the new objects. More... | |
class | dynamicMeshPointInterpolator |
Interpolates pointVectorFields. More... | |
class | dynamicMotionSolverFvMesh |
The dynamicMotionSolverFvMesh. More... | |
class | dynamicPressureFvPatchScalarField |
This boundary condition provides a dynamic pressure condition. It subtracts a kinetic energy term from a reference pressure to get a value which is fixed on the boundary. It forms the base class for the total and entrainment pressure conditions. More... | |
class | dynamicRefineFvMesh |
Dynamic mesh refinement/unrefinement based on volScalarField values. More... | |
class | dynamicTransportModel |
Base-class for all transport models used by compressible turbulence models. More... | |
class | dynamicTreeDataPoint |
Holds (reference to) pointField. Encapsulation of data needed for octree searches. Used for searching for nearest point. No bounding boxes around points. Only overlaps and calcNearest are implemented, rest makes little sense. More... | |
class | eagerGAMGProcAgglomeration |
'Eager' processor agglomeration of GAMGAgglomerations: at every level agglomerates 'mergeLevels' number of processors onto the minimum processor number. More... | |
class | eConstThermo |
Constant properties thermodynamics package templated on an equation of state. More... | |
class | eddyViscosity |
Eddy viscosity turbulence model base class. More... | |
class | edge |
An edge is a list of two point labels. The functionality it provides supports the discretisation on a 2-D flat mesh. More... | |
class | edgeCollapser |
Does polyTopoChanges to remove edges. Can remove faces due to edge collapse but can not remove cells due to face removal! Also removes unused points. More... | |
class | edgeFaceCirculator |
Walks from starting face around edge. More... | |
class | edgeIntersections |
Holder of intersections of edges of a surface with another surface. Optionally shuffles around points on surface to resolve any 'conflicts' (edge hitting triangle edge, edge hitting point etc.). More... | |
class | EdgeMap |
Map from edge (expressed as its endpoints) to value. More... | |
class | edgeMesh |
Points connected by edges. More... | |
class | edgeStats |
Helper class to calculate minimum edge length on mesh. More... | |
class | edgeSurface |
Description of surface in form of 'cloud of edges'. More... | |
class | edgeVertex |
Combines edge or vertex in single label. Used to specify cuts across cell circumference. More... | |
class | egrMixture |
Foam::egrMixture. More... | |
class | eIcoTabulatedThermo |
Internal energy based thermodynamics package using non-uniform tabulated data for heat capacity vs temperature. More... | |
class | electrostaticPotential |
class | emptyFvPatch |
A patch which will not exist in the fvMesh. Typical example is a front and back plane of a 2-D geometry. More... | |
class | emptyFvPatchField |
This boundary condition provides an 'empty' condition for reduced dimensions cases, i.e. 1- and 2-D geometries. Apply this condition to patches whose normal is aligned to geometric directions that do not constitue solution directions. More... | |
class | emptyFvsPatchField |
Foam::emptyFvsPatchField. More... | |
class | emptyPointPatch |
Empty plane patch. More... | |
class | emptyPointPatchField |
An empty boundary condition for pointField. More... | |
class | emptyPolyPatch |
Empty front and back plane patch. Used for 2-D geometries. More... | |
class | energyJumpAMIFvPatchScalarField |
This boundary condition provides an energy jump condition across a pair of coupled patches with an arbitrary mesh interface (AMI). It is not applied directly, but is employed on-the-fly when converting temperature boundary conditions into energy. More... | |
class | energyJumpFvPatchScalarField |
This boundary condition provides an energy jump condition across a pair of coupled patches. It is not applied directly, but is employed on-the-fly when converting temperature boundary conditions into energy. More... | |
class | energyScalingFunction |
class | engineMesh |
Foam::engineMesh. More... | |
class | enginePiston |
Foam::enginePiston. More... | |
class | engineTime |
An abstract class for the time description of the piston motion. More... | |
class | engineValve |
Foam::engineValve. More... | |
class | enrichedPatch |
The enriched patch contains a double set of faces from the two sides of the sliding interface before the cutting. More... | |
class | ensightAsciiStream |
class | ensightBinaryStream |
class | ensightFile |
Ensight output with specialised write() for strings, integers and floats. Correctly handles binary write as well. More... | |
class | ensightGeoFile |
Specialised Ensight output with extra geometry file header. More... | |
class | ensightMesh |
class | ensightPart |
Base class for ensightPartCells and ensightPartFaces. More... | |
class | ensightPartCells |
An implementation of ensightPart to hold volume mesh cells. More... | |
class | ensightPartFaces |
An implementation of ensightPart to hold volume mesh faces. More... | |
class | ensightParts |
A collection of several ensightPart elements. More... | |
class | ensightPTraits |
Conversion of OpenFOAM pTraits into the Ensight equivalent. More... | |
class | ensightPTraits< scalar > |
class | ensightPTraits< sphericalTensor > |
class | ensightPTraits< symmTensor > |
class | ensightPTraits< tensor > |
class | ensightPTraits< vector > |
class | ensightSetWriter |
class | ensightStream |
Abstract base class for writing Ensight data. More... | |
class | ensightSurfaceWriter |
A surfaceWriter for Ensight format. More... | |
class | entrainmentPressureFvPatchScalarField |
This boundary condition provides an entrainment pressure condition. The condition is the same as totalPressure condition except that where the total pressure uses the square of the velocity magnitude, this uses the signed square of the normal velocity. In the incompressible case, that means the formulation is as follows: More... | |
class | entry |
A keyword and a list of tokens is an 'entry'. More... | |
class | ePolynomialThermo |
Thermodynamics package templated on the equation of state, using polynomial functions for cv , e and s . More... | |
class | ePowerThermo |
Power-function based thermodynamics package templated on EquationOfState. More... | |
class | epsilonWallFunctionFvPatchScalarField |
This boundary condition provides a turbulence dissipation wall constraint for low- and high-Reynolds number turbulence models. More... | |
class | eqEqOp |
class | eqEqOp2 |
class | eqEqOp3 |
class | eqMagOp |
class | eqMagOp2 |
class | eqMinusOp |
class | eqMinusOp2 |
class | eqOp |
class | eqOp2 |
class | eqSqrOp |
class | eqSqrOp2 |
class | ErgunWenYuDragForce |
Ergun-Wen-Yu drag model for solid spheres. More... | |
class | error |
Class to handle errors and exceptions in a simple, consistent stream-based manner. More... | |
class | errorManip |
Error stream manipulators for exit and abort which may terminate the program or throw an exception depending if the exception handling has been switched on (off by default). More... | |
class | errorManipArg |
errorManipArg More... | |
class | ETAB |
The Enhanced TAB model. More... | |
class | eTabulatedThermo |
Internal energy based thermodynamics package using uniform tabulated data for internal energy and heat capacity vs pressure and temperature. More... | |
class | Euler |
Euler ODE solver of order (0)1. More... | |
class | EulerCoordinateRotation |
A coordinateRotation defined in the z-x-y Euler convention. More... | |
class | EulerImplicit |
An Euler implicit solver for chemistry. More... | |
class | EulerSI |
Semi-implicit Euler ODE solver of order (0)1. More... | |
class | exponentialDiffusivity |
Mesh motion diffusivity maipulator which returns the exp(-alpha/D) of the given diffusivity D. More... | |
class | exponentialSolidTransport |
Exponential properties for solid heat transport Templated into a given thermodynamics package. More... | |
class | extendedCellToCellStencil |
Baseclass for cell-to-cell stencils. More... | |
class | extendedCellToFaceStencil |
Calculates/constains the extended cell-to-face stencil. More... | |
class | extendedCentredCellToCellStencil |
class | extendedCentredCellToFaceStencil |
class | extendedCentredFaceToCellStencil |
class | extendedEdgeMesh |
Description of feature edges and points. More... | |
class | extendedFaceToCellStencil |
Note: transformations on coupled patches not supported. Problem is the positions of cells reachable through these patches. More... | |
class | extendedFeatureEdgeMesh |
extendedEdgeMesh + IO. More... | |
class | extendedUpwindCellToFaceStencil |
Creates upwind stencil by shifting a centred stencil to upwind and downwind faces and optionally removing all non-(up/down)wind faces ('pureUpwind'). More... | |
class | externalCoupledMixedFvPatchField |
This boundary condition provides an interface to an external application. Values are transferred as plain text files, where OpenFOAM data is written as: More... | |
class | externalCoupledTemperatureMixedFvPatchScalarField |
This boundary condition provides a temperature interface to an external application. Values are transferred as plain text files, where OpenFOAM data is written as: More... | |
class | externalDisplacementMeshMover |
Virtual base class for mesh movers with externally provided displacement field giving the boundary conditions. Move the mesh from the current location to a new location (so modify the mesh; v.s. motionSolver that only returns the new location). More... | |
class | externalPointEdgePoint |
Holds information regarding nearest wall point. Used in PointEdgeWave. (so not standard FaceCellWave) To be used in wall distance calculation. More... | |
class | externalWallHeatFluxTemperatureFvPatchScalarField |
This boundary condition applies a heat flux condition to temperature on an external wall in one of three modes: More... | |
class | extrapolatedCalculatedFvPatchField |
This boundary condition applies a zero-gradient condition from the patch internal field onto the patch faces when evaluated but may also be assigned. snGrad returns the patch gradient evaluated from the current internal and patch field values rather than returning zero. More... | |
class | extrude2DMesh |
Given a 2D mesh insert all the topology changes to extrude. Does not work in parallel. More... | |
class | extrudedMesh |
class | extrudeModel |
Top level extrusion model class. More... | |
class | extrudePatchMesh |
Mesh at a patch created on the fly. The following entry should be used on the field boundary dictionary: More... | |
class | face |
A face is a list of labels corresponding to mesh vertices. More... | |
class | faceAreaIntersect |
Face intersection class. More... | |
class | faceAreaPairGAMGAgglomeration |
Agglomerate using the pair algorithm. More... | |
class | faceAreaWeightAMI |
Face area weighted Arbitrary Mesh Interface (AMI) method. More... | |
class | faceAreaWeightModel |
Abstract base class for providing faceAreaWeight values to the cell motion controller based on an argument faceAreaFraction value, typically the ratio of the area of the face in question to the area of a square face with a side length of the local target cell size. More... | |
class | FaceCellWave |
Wave propagation of information through grid. Every iteration information goes through one layer of cells. Templated on information that is transferred. More... | |
class | faceCentredCubic |
Generate an FCC lattice of points inside the surfaces to be conformed to of the conformalVoronoiMesh. More... | |
class | faceCollapser |
Collapses faces into edges. Used to remove sliver faces (faces with small area but non-zero span). More... | |
class | faceCoupleInfo |
Container for information needed to couple to meshes. When constructed from two meshes and a list of coupled faces returns the mapping between points. More... | |
class | faceEqOp |
class | faceMapper |
This object provides mapping and fill-in information for face data between the two meshes after the topological change. It is constructed from mapPolyMesh. More... | |
class | facePointPatch |
A pointPatch based on a polyPatch. More... | |
class | FacePostProcessing |
Records particle face quantities on used-specified face zone. More... | |
class | faceSelection |
Face selection method for createBaffles. More... | |
class | faceSet |
A list of face labels. More... | |
class | faceSets |
class | faceToCell |
A topoSetSource to select cells based on usage in faces. More... | |
class | faceToCellStencil |
baseclass for extended cell centred addressing. Contains per cell a list of neighbouring faces in global addressing. More... | |
class | faceToFace |
A topoSetSource to select faces based on usage in another faceSet. More... | |
class | faceToPoint |
A topoSetSource to select points based on usage in faces. More... | |
class | faceZone |
A subset of mesh faces organised as a primitive patch. More... | |
class | faceZoneSet |
Like faceSet but -reads data from faceZone -updates faceZone when writing. More... | |
class | faceZoneToCell |
A topoSetSource to select cells based on side of faceZone. More... | |
class | faceZoneToFaceZone |
A topoSetSource to select faces based on usage in another faceSet. More... | |
class | FallOffReactionRate |
General class for handling unimolecular/recombination fall-off reactions. More... | |
class | fanPressureFvPatchScalarField |
This boundary condition can be applied to assign either a pressure inlet or outlet total pressure condition for a fan. More... | |
class | fanPressureJumpFvPatchScalarField |
This boundary condition provides a pressure jump condition, using the cyclic condition as a base. More... | |
class | FDICPreconditioner |
Faster version of the DICPreconditioner diagonal-based incomplete Cholesky preconditioner for symmetric matrices (symmetric equivalent of DILU) in which the reciprocal of the preconditioned diagonal and the upper coefficients divided by the diagonal are calculated and stored. More... | |
class | FDICSmoother |
Simplified diagonal-based incomplete Cholesky smoother for symmetric matrices. More... | |
class | featureEdgeMesh |
edgeMesh + IO. More... | |
class | featurePointConformer |
The Delaunay vertices required to conform to a feature point can be determined upon initialisation because the feature points are fixed and do not change throughout the meshing process. More... | |
class | FECCellToFaceStencil |
All cells connected via edge to face. More... | |
class | fft |
Fast fourier transform derived from the Numerical Recipes in C routine. More... | |
class | Fickian |
class | Field |
Pre-declare SubField and related Field type. More... | |
class | FieldActivatedInjection |
Injection at specified positions, with the conditions: More... | |
class | fieldDictionary |
Read field as dictionary (without mesh). More... | |
class | FieldField |
Generic field type. More... | |
class | fieldFromFile |
class | FieldFunction1 |
class | FieldFunction2 |
class | fieldInterpolation |
class | fieldMapper |
Abstract base class for field mapping. More... | |
class | fieldToCell |
A topoSetSource to select cells based on field values. More... | |
class | FIFOStack |
A FIFO stack based on a singly-linked list. More... | |
class | fileControl |
class | fileDiffusivity |
Motion diffusivity read from given file name. More... | |
class | fileMonitor |
Checking for changes to files. More... | |
class | fileMonitorWatcher |
Internal tracking via stat(3p) or inotify(7) More... | |
class | fileName |
A class for handling file names. More... | |
class | fileOperation |
class | fileStat |
Wrapper for stat() system call. More... | |
class | filmHeightInletVelocityFvPatchVectorField |
This boundary condition is designed to be used in conjunction with surface film modelling. It provides a velocity inlet boundary condition for patches where the film height is specified. The inflow velocity is obtained from the flux with a direction normal to the patch faces using: More... | |
class | filteredLinear2Limiter |
Class to generate weighting factors for the filteredLinear2 differencing scheme. More... | |
class | filteredLinear2VLimiter |
Class to generate weighting factors for the filteredLinear2V differencing scheme. More... | |
class | filteredLinear3Limiter |
Class to generate weighting factors for the filteredLinear differencing scheme. More... | |
class | filteredLinear3VLimiter |
Class to generate weighting factors for the filteredLinear3V differencing scheme. More... | |
class | filteredLinearLimiter |
Class to generate weighting factors for the filteredLinear differencing scheme. More... | |
class | findCellParticle |
Particle class that finds cells by tracking. More... | |
class | findUniqueIntersectOp |
class | FitData |
Data for the upwinded and centred polynomial fit interpolation schemes. The linearCorrection_ determines whether the fit is for a corrected linear scheme (first two coefficients are corrections for owner and neighbour) or a pure upwind scheme (first coefficient is correction for owner; weight on face taken as 1). More... | |
class | fixedBlended |
Two-scheme fixed-blending differencing scheme. More... | |
class | fixedEnergyFvPatchScalarField |
This boundary condition provides a fixed condition for energy. This is selected when the corresponding temperature condition is fixedValue. More... | |
class | fixedFluxExtrapolatedPressureFvPatchScalarField |
This boundary condition sets the pressure gradient to the provided value such that the flux on the boundary is that specified by the velocity boundary condition. More... | |
class | fixedFluxPressureFvPatchScalarField |
This boundary condition sets the pressure gradient to the provided value such that the flux on the boundary is that specified by the velocity boundary condition. More... | |
class | fixedGradientFvPatchField |
This boundary condition supplies a fixed gradient condition, such that the patch values are calculated using: More... | |
class | fixedInternalValueFvPatchField |
This boundary condition provides a mechanism to set boundary (cell) values directly into a matrix, i.e. to set a constraint condition. Default behaviour is to act as a zero gradient condition. More... | |
class | fixedJumpAMIFvPatchField |
This boundary condition provides a jump condition, across non-conformal cyclic path-pairs, employing an arbitraryMeshInterface (AMI). More... | |
class | fixedJumpFvPatchField |
This boundary condition provides a jump condition, using the cyclic condition as a base. More... | |
class | FixedList |
A 1D vector of objects of type <T> with a fixed size <Size>. More... | |
class | fixedMeanFvPatchField |
This boundary condition extrapolates field to the patch using the near-cell values and adjusts the distribution to match the specified, optionally time-varying, mean value. More... | |
class | fixedMeanOutletInletFvPatchField |
This boundary condition extrapolates field to the patch using the near-cell values and adjusts the distribution to match the specified, optionally time-varying, mean value. This extrapolated field is applied as a fixedValue for outflow faces but zeroGradient is applied to inflow faces. More... | |
class | fixedMultiPhaseHeatFluxFvPatchScalarField |
Calculates a wall temperature that produces the specified overall wall heat flux across all the phases in an Eulerian multi-phase simulation. More... | |
class | fixedNormalInletOutletVelocityFvPatchVectorField |
This velocity inlet/outlet boundary condition combines a fixed normal component obtained from the "normalVelocity" patchField supplied with a fixed or zero-gradiented tangential component depending on the direction of the flow and the setting of "fixTangentialInflow": More... | |
class | fixedNormalSlipFvPatchField |
This boundary condition sets the patch-normal component to a fixed value. More... | |
class | fixedNormalSlipPointPatchField |
slip with user-specified normal More... | |
class | fixedPressureCompressibleDensityFvPatchScalarField |
This boundary condition calculates a (liquid) compressible density as a function of pressure and fluid properties: More... | |
class | fixedProfileFvPatchField |
This boundary condition provides a fixed value profile condition. More... | |
class | fixedRhoFvPatchScalarField |
Foam::fixedRhoFvPatchScalarField. More... | |
class | fixedShearStressFvPatchVectorField |
Set a constant shear stress as tau0 = -nuEff dU/dn. More... | |
class | fixedTrim |
Fixed trim coefficients. More... | |
class | fixedUnburntEnthalpyFvPatchScalarField |
Fixed boundary condition for unburnt. More... | |
class | fixedValueFvPatchField |
This boundary condition supplies a fixed value constraint, and is the base class for a number of other boundary conditions. More... | |
class | fixedValueFvsPatchField |
Foam::fixedValueFvsPatchField. More... | |
class | fixedValuePointPatchField |
A FixedValue boundary condition for pointField. More... | |
class | flipLabelOp |
class | flipOp |
Class containing functor to negate primitives. Dummy for all other types. More... | |
class | flowRateInletVelocityFvPatchVectorField |
Velocity inlet boundary condition either correcting the extrapolated velocity or creating a uniform velocity field normal to the patch adjusted to match the specified flow rate. More... | |
class | flowRateOutletVelocityFvPatchVectorField |
Velocity outlet boundary condition which corrects the extrapolated velocity to match the specified flow rate. More... | |
class | fluentFvMesh |
class | fluidReactionThermo |
Base-class for multi-component fluid thermodynamic properties. More... | |
class | fluidSolutionControl |
Fluid solution control class. Holds flags specific to the solution of fluids. More... | |
class | fluidThermo |
Base-class for fluid thermodynamic properties. More... | |
class | flux |
class | flux< scalar > |
class | fluxCorrectedVelocityFvPatchVectorField |
This boundary condition provides a velocity outlet boundary condition for patches where the pressure is specified. The outflow velocity is obtained by "zeroGradient" and then corrected from the flux: More... | |
class | fluxLimitedLangmuirHinshelwoodReactionRate |
Langmuir-Hinshelwood reaction rate for gaseous reactions on surfaces including the optional flux limiter of Waletzko and Schmidt. More... | |
class | foamSurfaceWriter |
A surfaceWriter for native OpenFOAM format with support for writing ASCII or binary. More... | |
class | forceSuSp |
Helper container for force Su and Sp terms. More... | |
class | freePiston |
In case of free pistons, the piston position is determined by a user-defined position according to time. More... | |
class | FreeStream |
Inserting new particles across the faces of a all patched of type "patch" for a free stream. Uniform values number density, temperature and velocity sourced face-by-face from the boundaryT and boundaryU fields of the cloud. More... | |
class | freestreamFvPatchField |
This boundary condition provides a free-stream condition. It is a 'mixed' condition derived from the inletOutlet condition, whereby the mode of operation switches between fixed (free stream) value and zero gradient based on the sign of the flux. More... | |
class | freestreamPressureFvPatchScalarField |
This boundary condition provides a free-stream condition for pressure. More... | |
class | freestreamVelocityFvPatchVectorField |
This boundary condition provides a free-stream condition for velocity. More... | |
class | Function1 |
Run-time selectable general function of one variable. More... | |
class | Function1Evaluate |
Global functions to evaluate Function1 of GeometricFields. More... | |
class | Function2 |
Run-time selectable function of two variables. More... | |
class | Function2Evaluate |
Global functions to evaluate Function2 of GeometricFields. More... | |
class | functionEntry |
A functionEntry causes entries to be added/manipulated on the specified dictionary given an input stream. More... | |
class | functionName |
A functionName is a word starting with '#'. More... | |
class | functionObject |
Abstract base-class for Time/database functionObjects. More... | |
class | functionObjectList |
List of function objects with start(), execute() and end() functions that is called for each object. More... | |
class | fvBoundaryMesh |
Foam::fvBoundaryMesh. More... | |
class | fvBoundaryMeshMapper |
Foam::fvBoundaryMeshMapper. More... | |
class | fvCellSet |
class | fvConstraint |
Finite volume options abstract base class. More... | |
class | fvConstraints |
Finite volume constraints. More... | |
class | fvFieldDecomposer |
Finite Volume volume and surface field decomposer. More... | |
class | fvFieldReconstructor |
Finite volume reconstructor for volume and surface fields. More... | |
class | fvMatrix |
A special matrix type and solver, designed for finite volume solutions of scalar equations. Face addressing is used to make all matrix assembly and solution loops vectorise. More... | |
class | fvMesh |
Mesh data needed to do the Finite Volume discretisation. More... | |
class | fvMeshAdder |
Adds two fvMeshes without using any polyMesh morphing. Uses polyMeshAdder. More... | |
class | fvMeshDistribute |
Sends/receives parts of mesh+fvfields to neighbouring processors. Used in load balancing. More... | |
class | fvMeshLduAddressing |
Foam::fvMeshLduAddressing. More... | |
class | fvMeshMapper |
Class holds all the necessary information for mapping fields associated with fvMesh. More... | |
class | fvMeshSubset |
Post-processing mesh subset tool. Given the original mesh and the list of selected cells, it creates the mesh consisting only of the desired cells, with the mapping list for points, faces, and cells. More... | |
class | fvMeshTools |
A collection of tools for operating on an fvMesh. More... | |
class | fvModel |
Finite volume model abstract base class. More... | |
class | fvModels |
Finite volume models. More... | |
class | fvMotionSolver |
Base class for fvMesh based motionSolvers. More... | |
class | fvMotionSolverEngineMesh |
Foam::fvMotionSolverEngineMesh. More... | |
class | fvPatch |
A finiteVolume patch using a polyPatch and a fvBoundaryMesh. More... | |
class | fvPatchField |
Abstract base class with a fat-interface to all derived classes covering all possible ways in which they might be used. More... | |
class | fvPatchFieldMapper |
Foam::fvPatchFieldMapper. More... | |
class | fvPatchMapper |
Mapping class for a fvPatchField. More... | |
class | fvSchemes |
Selector class for finite volume differencing schemes. fvMesh is derived from fvSchemes so that all fields have access to the fvSchemes from the mesh reference they hold. More... | |
class | fvSolution |
Selector class for finite volume solution solution. fvMesh is derived from fvSolution so that all fields have access to the fvSolution from the mesh reference they hold. More... | |
class | fvsPatchField |
An abstract base class with a fat-interface to all derived classes covering all possible ways in which they might be used. More... | |
class | fvSurfaceMapper |
FV surface mapper. More... | |
class | GAMGAgglomeration |
Geometric agglomerated algebraic multigrid agglomeration class. More... | |
class | GAMGInterface |
Abstract base class for GAMG agglomerated interfaces. More... | |
class | GAMGInterfaceField |
Abstract base class for GAMG agglomerated interface fields. More... | |
class | GAMGPreconditioner |
Geometric agglomerated algebraic multigrid preconditioner. More... | |
class | GAMGProcAgglomeration |
Processor agglomeration of GAMGAgglomerations. More... | |
class | GAMGSolver |
Geometric agglomerated algebraic multigrid solver. More... | |
class | GammaLimiter |
Class with limiter function which returns the limiter for the Gamma differencing scheme based on phict obtained from the LimiterFunc class. More... | |
class | GaussSeidelSmoother |
A lduMatrix::smoother for Gauss-Seidel. More... | |
class | generalFieldMapper |
General field mapper supporting both direct and weighted mapping. More... | |
class | generalFvPatchFieldMapper |
class | generalPointPatchFieldMapper |
class | genericFvPatch |
FV variant of the genericPolyPatch. More... | |
class | genericFvPatchField |
This boundary condition provides a generic version of the calculated condition, useful as a fallback for handling unknown patch types. Not generally applicable as a user-specified condition. More... | |
class | genericPatchField |
class | genericPointPatch |
Substitute for unknown patches. Used for postprocessing when only basic polyPatch info is needed. More... | |
class | genericPointPatchField |
A generic version of calculatedPointPatchField, useful as a fallback for handling unknown patch types. More... | |
class | genericPolyPatch |
Substitute for unknown patches. Used for postprocessing when only basic polyPatch info is needed. More... | |
class | geomCellLooper |
Implementation of cellLooper. Does pure geometric cut through cell. More... | |
class | geomDecomp |
Geometrical domain decomposition. More... | |
class | GeoMesh |
Generic mesh wrapper used by volMesh, surfaceMesh, pointMesh etc. More... | |
class | GeometricField |
Generic GeometricField class. More... | |
class | GeometricMeshObject |
class | geometricOneField |
A class representing the concept of a GeometricField of 1 used to avoid unnecessary manipulations for objects which are known to be one at compile-time. More... | |
class | geometricSurfacePatch |
The geometricSurfacePatch is like patchIdentifier but for surfaces. Holds type, name and index. More... | |
class | geometricZeroField |
A class representing the concept of a GeometricField of 1 used to avoid unnecessary manipulations for objects which are known to be zero at compile-time. More... | |
class | globalIndex |
Calculates a unique integer (label so might not have enough room - 2G max) for processor + local index. E.g. More... | |
class | globalIndexAndTransform |
Determination and storage of the possible independent transforms introduced by coupledPolyPatches, as well as all of the possible permutations of these transforms generated by the presence of multiple coupledPolyPatches, i.e. more than one cyclic boundary. Note that any given point can be on maximum 3 transforms only (and these transforms have to be perpendicular) More... | |
class | GlobalIOField |
IOField with global data (so optionally read from master) More... | |
class | GlobalIOList |
IOList with global data (so optionally read from master) More... | |
class | globalMeshData |
Various mesh related information for a parallel run. Upon construction, constructs all info using parallel communication. More... | |
class | globalPoints |
Calculates points shared by more than two processor patches or cyclic patches. More... | |
class | gnuplotGraph |
Output in gnuplot (http://www.gnuplot.info) format. More... | |
class | gnuplotSetWriter |
class | GradientDispersionRAS |
The velocity is perturbed in the direction of -grad(k), with a Gaussian random number distribution with variance sigma. where sigma is defined below. More... | |
class | gradientEnergyCalculatedTemperatureFvPatchScalarField |
Base class for temperature boundary conditions in which the parameters of the gradient energy condition can be set directly. More... | |
class | gradientEnergyFvPatchScalarField |
This boundary condition provides a gradient condition for energy. This is selected when the corresponding temperature condition is zeroGradient, fixedGradient or gradientEnergyCalculatedTemperature. More... | |
class | gradientUnburntEnthalpyFvPatchScalarField |
gradient boundary condition for unburnt More... | |
class | gradingDescriptor |
Handles the specification for grading within a section of a block. More... | |
class | gradingDescriptors |
List of gradingDescriptor for the sections of a block with additional IO functionality. More... | |
class | graph |
Class to create, store and output qgraph files. More... | |
class | GravityForce |
Calculates particle gravity force. More... | |
class | greaterEqOp |
class | greaterEqOp2 |
class | greaterEqOp3 |
class | greaterOp |
class | greaterOp2 |
class | greaterOp3 |
class | greyDiffusiveRadiationMixedFvPatchScalarField |
This boundary condition provides a grey-diffuse condition for radiation intensity, I , for use with the finite-volume discrete-ordinates model (fvDOM), in which the radiation temperature is retrieved from the temperature field boundary condition. More... | |
class | greyDiffusiveViewFactorFixedValueFvPatchScalarField |
This boundary condition provides a grey-diffuse condition for radiative heat flux, qr , for use with the view factor model. More... | |
class | H2O |
water More... | |
class | harmonic |
Harmonic-mean differencing scheme class. More... | |
class | Hash |
Hash function class for primitives. All non-primitives used to hash entries on hash tables likely need a specialised version of this class. More... | |
class | Hash< Foam::fileName > |
Hash specialisation for hashing fileNames. More... | |
class | Hash< Foam::keyType > |
Hash specialisation for hashing keyTypes. More... | |
class | Hash< Foam::label > |
Hash specialisation for hashing labels. More... | |
class | Hash< Foam::string > |
Hash specialisation for hashing strings. More... | |
class | Hash< Foam::word > |
Hash specialisation for hashing words. More... | |
class | Hash< Foam::wordRe > |
Hash specialisation for hashing wordRes. More... | |
class | Hash< void * > |
Hash specialisation for hashing pointer addresses. More... | |
class | hashedWordList |
A wordList with hashed indices for faster lookup by name. More... | |
class | HashPtrTable |
A HashTable specialisation for hashing pointers. More... | |
class | HashSet |
A HashTable with keys but without contents. More... | |
class | hashSignedLabel |
hash for signed integers (Hash<label> only works for unsigned ints) More... | |
class | HashTable |
An STL-conforming hash table. More... | |
struct | HashTableCore |
Template-invariant bits for HashTable. More... | |
class | hConstThermo |
Constant properties thermodynamics package templated into the EquationOfState. More... | |
class | heatTransferModel |
class | HeatTransferModel |
Templated heat transfer model class. More... | |
class | heatTransferPhaseSystem |
class | HeatTransferPhaseSystem |
... More... | |
class | heheuPsiThermo |
class | heheuReactionThermo |
Foam::heheuReactionThermo. More... | |
class | hePsiThermo |
Energy for a mixture based on compressibility. More... | |
class | heRhoThermo |
Energy for a mixture based on density. More... | |
class | heSolidThermo |
Energy for a solid mixture. More... | |
class | heThermo |
Enthalpy/Internal energy for a mixture. More... | |
class | hexBlock |
Hex block definition used in the cfx converter. More... | |
class | hexCellLooper |
Implementation of cellLooper. More... | |
class | hexMatcher |
A cellMatcher for hex cells. More... | |
class | hexRef8 |
Refinement of (split) hexes using polyTopoChange. More... | |
class | hexRef8Data |
Various for reading/decomposing/reconstructing/distributing refinement data. More... | |
class | hIcoTabulatedThermo |
Enthalpy based thermodynamics package using non-uniform tabulated data for heat capacity vs temperature. More... | |
class | hierarchGeomDecomp |
Does hierarchical decomposition of points. Works by first sorting the points in x direction into equal sized bins, then in y direction and finally in z direction. More... | |
class | Histogram |
Calculates the counts per bin of a list. More... | |
class | homogeneousMixture |
Foam::homogeneousMixture. More... | |
class | hPolynomialThermo |
Thermodynamics package templated on the equation of state, using polynomial functions for cp , h and s . More... | |
class | hPowerThermo |
Power-function based thermodynamics package templated on EquationOfState. More... | |
class | hTabulatedThermo |
Enthalpy based thermodynamics package using uniform tabulated data for enthalpy and heat capacity vs pressure and temperature. More... | |
class | hydrostaticDisplacementFvPatchVectorField |
Fixed traction boundary condition for the standard linear elastic, fixed coefficient displacement equation in which the traction is caused by the hydrostatic pressure of an external liquid reservoir. More... | |
class | hydrostaticInitialisation |
Optional hydrostatic initialisation of p_rgh and p by solving for and caching the hydrostatic ph_rgh and updating the density such that. More... | |
class | iC3H8O |
iso-propanol More... | |
class | IC8H18 |
iso-Octane More... | |
class | icoPolynomial |
Incompressible, polynomial form of equation of state, using a polynomial function for density. More... | |
class | icoTabulated |
Incompressible of equation of state using non-uniform tabulated density vs temperature. More... | |
class | icoTabulatedTransport |
Transport properties package using non-uniform tabulated data for viscosity and thermal conductivity vs temperature. More... | |
class | IDEA |
The IDEA fuel is constructed by adding 30% alphaMethylNaphthalene with 70% n-decane. More... | |
class | Identity |
Templated identity and dual space identity tensors derived from SphericalTensor. More... | |
class | ifEqEqOp |
Reduction class. If x and y are not equal assign value. More... | |
class | IFstream |
Input from file stream. More... | |
class | IFstreamAllocator |
A std::istream with ability to handle compressed files. More... | |
class | ignition |
Foam::ignition. More... | |
class | ignitionSite |
Foam::ignitionSite. More... | |
class | ILList |
Template class for intrusive linked lists. More... | |
class | Imanip |
class | immiscibleIncompressibleThreePhaseMixture |
An immiscible incompressible two-phase mixture transport model. More... | |
class | immiscibleIncompressibleTwoPhaseMixture |
An immiscible incompressible two-phase mixture transport model. More... | |
class | inclinedFilmNusseltHeightFvPatchScalarField |
Film height boundary condition for inclined films that imposes a sinusoidal perturbation on top of a mean flow rate, where the height is calculated using the Nusselt solution. More... | |
class | inclinedFilmNusseltInletVelocityFvPatchVectorField |
Film velocity boundary condition for inclined films that imposes a sinusoidal perturbation on top of a mean flow rate, where the velocity is calculated using the Nusselt solution. More... | |
class | incompressibleMomentumTransportModel |
Abstract base class for turbulence models (RAS, LES and laminar). More... | |
class | IncompressibleMomentumTransportModel |
Templated abstract base class for single-phase incompressible turbulence models. More... | |
class | incompressiblePerfectGas |
Incompressible gas equation of state using a constant reference pressure in the perfect gas equation of state rather than the local pressure so that the density only varies with temperature and composition. More... | |
class | incompressibleThreePhaseMixture |
class | incompressibleTwoPhaseInteractingMixture |
A two-phase incompressible transportModel for interacting phases requiring the direct evaluation of the mixture viscosity, e.g. activated sludge or slurry. More... | |
class | incompressibleTwoPhaseMixture |
A two-phase incompressible transportModel. More... | |
class | indexedCellEnum |
class | indexedOctree |
Non-pointer based hierarchical recursive searching. More... | |
class | indexedParticle |
Adds label index to base particle. More... | |
class | indexedParticleCloud |
A Cloud of particles carrying an additional index. More... | |
class | indexedVertexEnum |
class | IndirectList |
A List with indirect addressing. More... | |
class | IndirectListAddressing |
A helper class for storing addresses. More... | |
class | InertPhaseModel |
Class which represents an inert phase, with no reactions. Returns zero reaction rate and heat. More... | |
class | INew |
A helper class when constructing from an Istream or dictionary. More... | |
class | InflationInjection |
Inflation injection - creates new particles by splitting existing particles within in a set of generation cells, then inflating them to a target diameter within the generation cells and an additional set of inflation cells. More... | |
class | InflowBoundaryModel |
Templated inflow boundary model class. More... | |
class | InfoProxy |
A helper class for outputting values to Ostream. More... | |
class | inhomogeneousMixture |
Foam::inhomogeneousMixture. More... | |
class | initialPointsMethod |
Abstract base class for generating initial points for a conformalVoronoiMesh. More... | |
class | InjectionModel |
Templated injection model class. More... | |
class | InjectionModelList |
List of injection models. More... | |
class | inletOutletFvPatchField |
This boundary condition provides a generic outflow condition, with specified inflow for the case of return flow. More... | |
class | inletOutletTotalTemperatureFvPatchScalarField |
This boundary condition provides an outflow condition for total temperature for use with supersonic cases, where a user-specified value is applied in the case of reverse flow. More... | |
class | innerProduct |
class | innerProduct< one, arg2 > |
class | innerProduct< SphericalTensor2D< Cmpt >, SphericalTensor2D< Cmpt > > |
class | innerProduct< SphericalTensor2D< Cmpt >, SymmTensor2D< Cmpt > > |
class | innerProduct< SphericalTensor2D< Cmpt >, Tensor2D< Cmpt > > |
class | innerProduct< SphericalTensor2D< Cmpt >, Vector2D< Cmpt > > |
class | innerProduct< SphericalTensor< Cmpt >, SphericalTensor< Cmpt > > |
class | innerProduct< SphericalTensor< Cmpt >, SymmTensor< Cmpt > > |
class | innerProduct< SphericalTensor< Cmpt >, Tensor< Cmpt > > |
class | innerProduct< SphericalTensor< Cmpt >, Vector< Cmpt > > |
class | innerProduct< SymmTensor2D< Cmpt >, SphericalTensor2D< Cmpt > > |
class | innerProduct< SymmTensor2D< Cmpt >, SymmTensor2D< Cmpt > > |
class | innerProduct< SymmTensor2D< Cmpt >, Vector2D< Cmpt > > |
class | innerProduct< SymmTensor< Cmpt >, SphericalTensor< Cmpt > > |
class | innerProduct< SymmTensor< Cmpt >, SymmTensor< Cmpt > > |
class | innerProduct< SymmTensor< Cmpt >, Tensor< Cmpt > > |
class | innerProduct< SymmTensor< Cmpt >, Vector< Cmpt > > |
class | innerProduct< Tensor2D< Cmpt >, SphericalTensor2D< Cmpt > > |
class | innerProduct< Tensor2D< Cmpt >, Tensor2D< Cmpt > > |
class | innerProduct< Tensor2D< Cmpt >, Vector2D< Cmpt > > |
class | innerProduct< Tensor< Cmpt >, SphericalTensor< Cmpt > > |
class | innerProduct< Tensor< Cmpt >, SymmTensor< Cmpt > > |
class | innerProduct< Vector2D< Cmpt >, SphericalTensor2D< Cmpt > > |
class | innerProduct< Vector2D< Cmpt >, SymmTensor2D< Cmpt > > |
class | innerProduct< Vector2D< Cmpt >, Tensor2D< Cmpt > > |
class | innerProduct< Vector< Cmpt >, scalar > |
Dummy innerProduct for scalar to allow the construction of vtables for. More... | |
class | innerProduct< Vector< Cmpt >, SphericalTensor< Cmpt > > |
class | innerProduct< Vector< Cmpt >, SymmTensor< Cmpt > > |
class | instant |
An instant of time. Contains the time value and name. More... | |
class | integrationScheme |
Base for a set of schemes which integrate simple ODEs which arise from semi-implcit rate expressions. More... | |
class | InteractionLists |
Builds direct interaction list, specifying which local (real) cells are potentially in range of each other. More... | |
class | interfaceCompositionModel |
Generic base class for interface composition models. These models describe the composition in phase 1 of the supplied pair at the interface with phase 2. More... | |
class | InterfaceCompositionPhaseChangePhaseSystem |
Class to provide interfacial heat and mass transfer between a number of phases according to a interface composition model. More... | |
class | interfaceCompression |
Interface compression corrected scheme, based on counter-gradient transport, to maintain sharp interfaces during VoF simulations. More... | |
class | interfaceCompressionFvPatchScalarField |
Applies interface-compression to the phase-fraction distribution at the patch by setting the phase-fraction to 0 if it is below 0.5, otherwise to 1. More... | |
class | interfaceCompressionNew |
class | interfaceProperties |
Contains the interface properties. More... | |
class | internalFvPatch |
Constraint patch to hold internal faces exposed by sub-setting. More... | |
class | internalFvPatchField |
Constraint fvPatchField to hold values for internal face exposed by sub-setting. More... | |
class | internalFvsPatchField |
Constraint fvsPatchField to hold values for internal face exposed by sub-setting. More... | |
class | internalPointPatch |
Constraint patch to hold internal faces exposed by sub-setting. More... | |
class | internalPointPatchField |
Constraint pointPatchField to hold values for internal face exposed by sub-setting. More... | |
class | internalPolyPatch |
Constraint patch to hold internal faces exposed by sub-setting. More... | |
class | internalWriter |
Write fields (internal). More... | |
class | interpolatingSolidBodyMotionSolver |
Solid-body motion of the mesh specified by a run-time selectable motion function. Applies SLERP interpolation of movement as function of distance to the object surface to move the mesh points. More... | |
class | interpolation |
Abstract base class for interpolation. More... | |
class | interpolationCell |
Uses the cell value for any point in the cell. More... | |
class | interpolationCellPatchConstrained |
Uses the cell value for any point in the cell apart from a boundary face where it uses the boundary value directly. Note: will not work on an empty patch. More... | |
class | interpolationCellPoint |
Given cell centre values and point (vertex) values decompose into tetrahedra and linear interpolate within them. More... | |
class | interpolationCellPointFace |
Foam::interpolationCellPointFace. More... | |
class | interpolationCellPointWallModified |
As interpolationCellPoint, but with the point field modified on wall faces. More... | |
class | interpolationLookUpTable |
A list of lists. Interpolates based on the first dimension. The values must be positive and monotonically increasing in each dimension. More... | |
class | interpolationPointMVC |
Given cell centre values interpolates to vertices and uses these to do a Mean Value Coordinates interpolation. More... | |
class | interpolationWeights |
Abstract base class for interpolating in 1D. More... | |
class | intersectedSurface |
Given triSurface and intersection creates the intersected (properly triangulated) surface. (note: intersection is the list of points and edges 'shared' by two surfaces) More... | |
class | intersection |
Foam::intersection. More... | |
class | interstitialInletVelocityFvPatchVectorField |
Inlet velocity in which the actual interstitial velocity is calculated by dividing the specified inletVelocity field with the local phase-fraction. More... | |
class | inverseDistanceDiffusivity |
Inverse distance to the given patches motion diffusivity. More... | |
class | inverseFaceDistanceDiffusivity |
Inverse distance to the given patches motion diffusivity. More... | |
class | inversePointDistanceDiffusivity |
Inverse distance to the given patches motion diffusivity. More... | |
class | inverseVolumeDiffusivity |
Inverse cell-volume motion diffusivity. More... | |
class | IOdictionary |
IOdictionary is derived from dictionary and IOobject to give the dictionary automatic IO functionality via the objectRegistry. To facilitate IO, IOdictionary is provided with a constructor from IOobject and writeData and write functions. More... | |
class | IOerror |
Report an I/O error. More... | |
class | IOField |
A primitive field of type <T> with automated input and output. More... | |
class | IOList |
A List of objects of type <T> with automated input and output. More... | |
class | IOMap |
A Map of objects of type <T> with automated input and output. Is a global object; i.e. can be read from undecomposed case. More... | |
class | IOmapDistribute |
IOmapDistribute is derived from mapDistribute and IOobject to give the mapDistribute automatic IO functionality via the objectRegistry. More... | |
class | IOMRFZoneList |
List of MRF zones with IO functionality. MRF zones are specified by a list of dictionary entries, e.g. More... | |
class | IOobject |
IOobject defines the attributes of an object for which implicit objectRegistry management is supported, and provides the infrastructure for performing stream I/O. More... | |
class | IOobjectList |
List of IOobjects with searching and retrieving facilities. More... | |
class | IOOutputFilter |
IOdictionary wrapper around OutputFilter to allow them to read from their associated dictionaries. More... | |
class | IOporosityModelList |
List of porosity models with IO functionality. More... | |
class | IOPosition |
Helper IO class to read and write particle positions. More... | |
class | IOPtrList |
A PtrList of objects of type <T> with automated input and output. More... | |
class | IOstream |
An IOstream is an abstract base class for all input/output systems; be they streams, files, token lists etc. More... | |
class | IPstream |
Input inter-processor communications stream. More... | |
class | IrreversibleReaction |
Simple extension of Reaction to handle irreversible reactions. More... | |
class | isNotEqOp |
class | isoSurface |
Marching tet iso surface algorithm with filtering to remove unnecessary topology. More... | |
class | IsothermalPhaseModel |
Class which represents a phase for which the temperature (strictly energy) remains constant. Returns an empty energy equation and does nothing when correctThermo is called. More... | |
class | IsotropyModel |
Base class for collisional return-to-isotropy models. More... | |
class | ISstream |
Generic input stream. More... | |
class | Istream |
An Istream is an abstract base class for all input systems (streams, files, token lists etc). The basic operations are construct, close, read token, read primitive and read binary block. More... | |
class | IStringStream |
Input from memory buffer stream. More... | |
class | isVolMesh |
Supports static assertion that a template argument is of type volMesh. More... | |
class | isVolMesh< volMesh > |
class | ITstream |
Input token stream. More... | |
class | janafThermo |
JANAF tables based thermodynamics package templated into the equation of state. More... | |
class | JanevReactionRate |
Janev, Langer, Evans and Post reaction rate. More... | |
class | jobInfo |
Helper class for recording information about run/finished jobs. More... | |
class | JohnsonJacksonParticleSlipFvPatchVectorField |
Partial slip boundary condition for the particulate velocity. More... | |
class | JohnsonJacksonParticleThetaFvPatchScalarField |
Robin condition for the particulate granular temperature. More... | |
class | jplotGraph |
jplot graph output More... | |
class | jplotSetWriter |
class | jumpCyclicAMIFvPatchField |
This boundary condition provides a base class that enforces a cyclic condition with a specified 'jump' (or offset) between a pair of boundaries, whereby communication between the patches is performed using an arbitrary mesh interface (AMI) interpolation. More... | |
class | jumpCyclicFvPatchField |
This boundary condition provides a base class for coupled-cyclic conditions with a specified 'jump' (or offset) between the values. More... | |
class | keepIfTrueOp |
class | Keyed |
A container with an integer key attached to any item. More... | |
class | keyType |
A class for handling keywords in dictionaries. More... | |
class | kinematicTransportModel |
Base-class for all transport models used by the incompressible turbulence models. More... | |
class | kLowReWallFunctionFvPatchScalarField |
This boundary condition provides a turbulence kinetic energy wall function condition for low- and high-Reynolds number turbulent flow cases. More... | |
class | Kmesh |
Calculate the wavenumber vector field corresponding to the space vector field of a finite volume mesh;. More... | |
class | kOmegaSST |
Implementation of the k-omega-SST turbulence model for incompressible and compressible flows. More... | |
class | kqRWallFunctionFvPatchField |
This boundary condition provides a suitable condition for turbulence k , q , and R fields for the case of high Reynolds number flow using wall functions. More... | |
class | labelBits |
A 29bits label and 3bits direction packed into single label. More... | |
class | labelledTri |
Triangle with additional region number. More... | |
class | labelRange |
A label range specifier. More... | |
class | labelRanges |
A list of labelRange. More... | |
class | labelToCell |
A topoSetSource to select cells based on explicitly given labels. More... | |
class | labelToFace |
A topoSetSource to select faces given explicitly provided face labels. More... | |
class | labelToPoint |
A topoSetSource to select points given explicitly provided labels. More... | |
class | lagrangianFieldDecomposer |
Lagrangian field decomposer. More... | |
class | lagrangianWriter |
Writes Lagrangian points and fields. More... | |
class | laminarFlameSpeed |
Abstract class for laminar flame speed. More... | |
class | laminarModel |
Templated abstract base class for laminar transport models. More... | |
class | laminarThermophysicalTransportModel |
Templated abstract base class for laminar thermophysical transport models. More... | |
class | LandauTellerReactionRate |
Landau-Teller reaction rate. More... | |
class | LangmuirHinshelwoodReactionRate |
Langmuir-Hinshelwood reaction rate for gaseous reactions on surfaces. More... | |
class | laplaceFilter |
Laplace filter for LES. More... | |
class | LarsenBorgnakkeVariableHardSphere |
Variable Hard Sphere BinaryCollision Model with Larsen Borgnakke internal energy redistribution. Based on the INELRS subroutine in Bird's DSMC0R.FOR. More... | |
class | layerAdditionRemoval |
Cell layer addition mesh modifier. More... | |
class | layeredEngineMesh |
Foam::layeredEngineMesh. More... | |
class | layerParameters |
Simple container to keep together layer specific information. More... | |
class | lduAddressing |
The class contains the addressing required by the lduMatrix: upper, lower and losort. More... | |
class | lduInterface |
An abstract base class for implicitly-coupled interfaces e.g. processor and cyclic patches. More... | |
class | LduInterfaceField |
An abstract base class for implicitly-coupled interface fields e.g. processor and cyclic patch fields. More... | |
class | lduInterfaceField |
An abstract base class for implicitly-coupled interface fields e.g. processor and cyclic patch fields. More... | |
class | LduInterfaceFieldPtrsList |
class | LduMatrix |
LduMatrix is a general matrix class in which the coefficients are stored as three arrays, one for the upper triangle, one for the lower triangle and a third for the diagonal. More... | |
class | lduMatrix |
lduMatrix is a general matrix class in which the coefficients are stored as three arrays, one for the upper triangle, one for the lower triangle and a third for the diagonal. More... | |
class | lduMesh |
Abstract base class for meshes which provide LDU addressing for the construction of lduMatrix and LDU-solvers. More... | |
class | lduPrimitiveMesh |
Simplest contrete lduMesh which stores the addressing needed by lduMatrix. More... | |
class | lduScheduleEntry |
Struct to hold the patch index and the initialisation flag for the patch schedule. More... | |
class | leastSquaresVectors |
Least-squares gradient scheme vectors. More... | |
class | LESdelta |
Abstract base class for LES deltas. More... | |
class | LESfilter |
Abstract class for LES filters. More... | |
class | LESModel |
Templated abstract base class for LES SGS models. More... | |
class | lessEqOp |
class | lessEqOp2 |
class | lessEqOp3 |
class | lessOp |
class | lessOp2 |
class | lessOp3 |
class | lessProcPatches |
Less function class that can be used for sorting processor patches. More... | |
class | LESThermophysicalTransportModel |
Templated abstract base class for LES thermophysical transport models. More... | |
class | LIFOStack |
A LIFO stack based on a singly-linked list. More... | |
class | LiftForce |
Base class for particle lift force models. More... | |
class | liftModel |
class | Limited01Limiter |
A LimitedLimiter with the range 0-1. More... | |
class | limitedCubicLimiter |
Class with limiter function which returns the limiter for the TVD limited centred-cubic differencing scheme based on r obtained from the LimiterFunc class. More... | |
class | limitedCubicVLimiter |
Class with limiter function which returns the limiter for the limitedCubicV differencing scheme based on r obtained from the LimiterFunc class. More... | |
class | LimitedLimiter |
Foam::LimitedLimiter. More... | |
class | limitedLinearLimiter |
Class with limiter function which returns the limiter for the TVD limited linear differencing scheme based on r obtained from the LimiterFunc class. More... | |
class | LimitedScheme |
Class to create NVD/TVD limited weighting-factors. More... | |
class | limitedSurfaceInterpolationScheme |
Abstract base class for limited surface interpolation schemes. More... | |
class | limiterBlended |
Blends two specified schemes using the limiter function provided by a limitedSurfaceInterpolationScheme. More... | |
class | limitWith |
limitWith differencing scheme limits the specified scheme with the specified limiter. More... | |
class | LindemannFallOffFunction |
Lindemann fall-off function. More... | |
class | line |
A line primitive. More... | |
class | linear |
Central-differencing interpolation scheme class. More... | |
class | linearDistance |
class | linearEqn |
Linear equation of the form a*x + b = 0. More... | |
class | linearFitPolynomial |
Linear polynomial for interpolation fitting. More... | |
class | linearInterpolationWeights |
class | linearSpatial |
class | linearTsub |
Vapour bubble diameter model for modelling of condensation of vapour bubbles. Calculates bubble diameter as a function of liquid phase subcooling. More... | |
class | linearUpwind |
linearUpwind interpolation scheme class derived from upwind and returns upwind weighting factors and also applies a gradient-based explicit correction. More... | |
class | linearUpwindV |
linearUpwindV interpolation scheme class derived from upwind and returns upwind weighting factors but also applies an explicit correction. More... | |
class | linearValveFvMesh |
A sliding linear valve. More... | |
class | linearValveLayersFvMesh |
A sliding linear valve with layers. More... | |
class | linearViscousStress |
Linear viscous stress turbulence model base class. More... | |
class | lineDivide |
Divides a line into segments. More... | |
class | liquid |
Generic thermophysical properties class for a liquid in which the functions and coefficients for each property are run-time selected. More... | |
class | LiquidEvaporation |
Liquid evaporation model. More... | |
class | LiquidEvaporationBoil |
Liquid evaporation model. More... | |
class | liquidMixtureProperties |
A mixture of liquids. More... | |
class | liquidProperties |
The thermophysical properties of a liquid. More... | |
class | LISAAtomisation |
Primary Breakup Model for pressure swirl atomisers. More... | |
class | List |
A 1D array of objects of type <T>, where the size of the vector is known and used for subscript bounds checking, etc. More... | |
class | ListAppendEqOp |
Helper class for list to append y onto the end of x. More... | |
class | ListCompactIO |
A List of objects of type <T> with input and output using a compact storage. Behaves like List except when binary output in case it writes a CompactListList. More... | |
class | ListHashTable |
STL conforming hash table using contiguous lists rather than linked lists. More... | |
struct | ListHashTableCore |
Template-invariant bits for ListHashTable. More... | |
class | listPlusEqOp |
class | ListPlusEqOp |
Plus op for FixedList<scalar> More... | |
class | listUpdateOp |
List update operation. More... | |
class | LList |
Template class for non-intrusive linked lists. More... | |
class | LLTMatrix |
Templated class to perform the Cholesky decomposition on a symmetric positive-definite matrix. More... | |
class | localBlended |
Two-scheme localBlended differencing scheme. More... | |
class | LocalInteraction |
Patch interaction specified on a patch-by-patch basis. More... | |
class | localIOdictionary |
localIOdictionary derived from IOdictionary with global set false to disable parallel master reading. More... | |
class | localMax |
LocalMax-mean differencing scheme class. More... | |
class | localMin |
LocalMin-mean differencing scheme class. More... | |
class | localPointRegion |
Takes mesh with 'baffles' (= boundary faces sharing points). Determines for selected points on boundary faces the 'point region' it is connected to. Each region can be visited by a cell-face-cell walk. Used in duplicating points after splitting baffles. More... | |
class | logPolynomialTransport |
Transport package using polynomial functions of ln(T) for mu and kappa: More... | |
class | lookupProfile |
Look-up based profile data - drag and lift coefficients are linearly interpolated based on the supplied angle of attack. More... | |
class | LPtrList |
Template class for non-intrusive linked PtrLists. More... | |
class | LUscalarMatrix |
Class to perform the LU decomposition on a symmetric matrix. More... | |
class | LUST |
LUST: Linear-upwind stabilised transport. More... | |
class | magnet |
Class to hold the defining data for a permanent magnet, in particular the name, relative permeability and remanence. More... | |
class | manualDecomp |
Decomposition given a cell-to-processor association in a file. More... | |
class | manualGAMGProcAgglomeration |
Manual processor agglomeration of GAMGAgglomerations. More... | |
class | ManualInjection |
Manual injection. More... | |
class | manualRenumber |
Renumber given a ordered-to-original cell association in a file. More... | |
class | Map |
A HashTable to objects of type <T> with a label key. More... | |
class | mapAddedPolyMesh |
Class containing mesh-to-mesh mapping information after a mesh addition where we add a mesh ('added mesh') to an old mesh, creating a new mesh. More... | |
class | mapDistribute |
Class containing processor-to-processor mapping information. More... | |
class | mapDistributeBase |
Class containing processor-to-processor mapping information. More... | |
class | mapDistributeLagrangian |
Class containing mesh-to-mesh mapping information for particles. More... | |
class | mapDistributePolyMesh |
Class containing mesh-to-mesh mapping information after a mesh distribution where we send parts of meshes (using subsetting) to other processors and receive and reconstruct mesh. More... | |
class | MapInternalField |
Generic internal field mapper. For "real" mapping, add template specialisations for mapping of internal fields depending on mesh type. More... | |
class | MapInternalField< Type, MeshMapper, pointMesh > |
class | MapInternalField< Type, MeshMapper, surfaceMesh > |
class | MapInternalField< Type, MeshMapper, volMesh > |
class | mapNearestAMI |
Nearest-mapping Arbitrary Mesh Interface (AMI) method. More... | |
class | mapNearestMethod |
Map nearest mesh-to-mesh interpolation class. More... | |
class | mapPatchChange |
Class containing mesh-to-mesh mapping information after a patch change operation. More... | |
class | mappedFieldFvPatchField |
This boundary condition provides a self-contained version of the mapped condition. It does not use information on the patch; instead it holds thr data locally. More... | |
class | mappedFixedInternalValueFvPatchField |
This boundary condition maps the boundary and internal values of a neighbour patch field to the boundary and internal values of *this. More... | |
class | mappedFixedValueFvPatchField |
This boundary condition maps the value at a set of cells or patch faces back to *this. More... | |
class | mappedFlowRateFvPatchVectorField |
Describes a volumetric/mass flow normal vector boundary condition by its magnitude as an integral over its area. More... | |
class | mappedFvPatch |
Foam::mappedFvPatch. More... | |
class | mappedPatchBase |
Determines a mapping between patch face centres and mesh cell or face centres and processors they're on. More... | |
class | mappedPatchFieldBase |
Functionality for sampling fields using mappedPatchBase. Every call to mappedField() returns a sampled field, optionally scaled to maintain an area-weighted average. More... | |
class | mappedPointPatch |
mappedPointPatch patch. More... | |
class | mappedPolyPatch |
Determines a mapping between patch face centres and mesh cell or face centres and processors they're on. More... | |
class | mappedVariableThicknessWallFvPatch |
Take thickness field and number of layers and returns deltaCoeffs as 2.0/thickness/nLayers. To be used with 1D thermo baffle. More... | |
class | mappedVariableThicknessWallPolyPatch |
Foam::mappedVariableThicknessWallPolyPatch. More... | |
class | mappedVelocityFluxFixedValueFvPatchField |
This boundary condition maps the velocity and flux from a neighbour patch to this patch. More... | |
class | mappedWallFvPatch |
Foam::mappedWallFvPatch. More... | |
class | mappedWallPointPatch |
mappedWallPointPatch patch. More... | |
class | mappedWallPolyPatch |
Determines a mapping between patch face centres and mesh cell or face centres and processors they're on. More... | |
class | MapPointField |
Map point field on topology change. This is a partial template specialisation for GeoMesh=pointMesh. More... | |
class | mapPolyMesh |
Class containing mesh-to-mesh mapping information after a change in polyMesh topology. More... | |
class | mapSubsetMesh |
Class containing mesh-to-mesh mapping information after a subset operation. More... | |
class | MarshakRadiationFixedTemperatureFvPatchScalarField |
A 'mixed' boundary condition that implements a Marshak condition for the incident radiation field (usually written as G) More... | |
class | MarshakRadiationFvPatchScalarField |
A 'mixed' boundary condition that implements a Marshak condition for the incident radiation field (usually written as G) More... | |
class | masterCoarsestGAMGProcAgglomeration |
Processor agglomeration of GAMGAgglomerations. More... | |
class | masterOFstream |
Master-only drop-in replacement for OFstream. More... | |
class | matchedFlowRateOutletVelocityFvPatchVectorField |
Velocity outlet boundary condition which corrects the extrapolated velocity to match the flow rate of the specified corresponding inlet patch. More... | |
class | Matrix |
A templated (m x n) matrix of objects of <T>. More... | |
class | MatrixBlock |
A templated block of an (m x n) matrix of type <MatrixType>. More... | |
class | MatrixSpace |
Templated matrix space. More... | |
class | maxEqOp |
class | maxEqOp2 |
class | maxMagSqrEqOp |
class | maxMagSqrEqOp2 |
class | maxMagSqrOp |
class | maxMagSqrOp2 |
class | maxMagSqrOp3 |
class | maxOp |
class | maxOp2 |
class | maxOp3 |
class | MaxwellianThermal |
Wall interaction setting microscopic velocity to a random one drawn from a Maxwellian distribution corresponding to a specified temperature. More... | |
class | maxwellSlipUFvPatchVectorField |
Maxwell slip boundary condition including thermal creep and surface curvature terms that can be optionally switched off. More... | |
class | MaxwellStefan |
class | MB |
Liquid nC3H7COOCH3 or (MB) methyl butyrate (used for biodiesel surrogate) More... | |
class | medialAxisMeshMover |
Mesh motion solver that uses a medial axis algorithm to work out a fraction between the (nearest point on a) moving surface and the (nearest point on a) fixed surface. This fraction is then used to scale the motion. Use. More... | |
class | memberFunctionSelectionTables |
Macros to enable the easy declaration of member function selection tables. More... | |
class | memInfo |
Memory usage information for the process running this object. More... | |
class | mergedCyclicPolyPatch |
Placeholder for two patches describing a cyclic interface. Used in mesh conversion processes involving formats in which both halves of a cyclic interface are stored on the same patch. More... | |
class | mergePolyMesh |
Add a given mesh to the original mesh to create a single new mesh. More... | |
class | meshCutAndRemove |
like meshCutter but also removes non-anchor side of cell. More... | |
class | meshCutter |
Cuts (splits) cells. More... | |
class | meshDualiser |
Creates dual of polyMesh. Every point becomes a cell (or multiple cells for feature points), a walk around every edge creates faces between them. More... | |
class | MeshedSurface |
A surface geometry mesh with zone information, not to be confused with the similarly named surfaceMesh, which actually refers to the cell faces of a volume mesh. More... | |
class | MeshedSurfaceIOAllocator |
A helper class for storing points, faces and zones with IO capabilities. More... | |
class | MeshedSurfaceProxy |
A proxy for writing MeshedSurface, UnsortedMeshedSurface and surfMesh to various file formats. More... | |
class | meshObject |
class | MeshObject |
Templated abstract base-class for optional mesh objects used to automate their allocation to the mesh database and the mesh-modifier event-loop. More... | |
class | meshReader |
This class supports creating polyMeshes with baffles. More... | |
class | meshRefinement |
Helper class which maintains intersections of (changing) mesh with (static) surfaces. More... | |
class | meshSearch |
Various (local, not parallel) searches on polyMesh; uses (demand driven) octree to search. More... | |
class | meshSearchFACE_CENTRE_TRISMeshObject |
MeshObject wrapper around meshSearch(mesh, polyMesh::FACE_CENTRE_TRIS). More... | |
class | meshSearchMeshObject |
MeshObject wrapper around meshSearch(mesh). More... | |
class | meshStructure |
Detect extruded mesh structure given a set of patch faces. More... | |
class | meshToMesh |
Class to calculate the cell-addressing between two overlapping meshes. More... | |
class | meshToMesh0 |
Serial mesh to mesh interpolation class. More... | |
class | meshToMeshMethod |
Base class for mesh-to-mesh calculation methods. More... | |
class | meshTriangulation |
Triangulation of mesh faces. Generates (multiply connected) trisurface. More... | |
class | MeshWave |
FaceCellWave plus data. More... | |
class | meshWriter |
write OpenFOAM meshes and/or results to another CFD format More... | |
class | MeshZones |
A list of mesh zones. More... | |
class | messageStream |
Class to handle messaging in a simple, consistent stream-based manner. More... | |
class | metisDecomp |
Metis domain decomposition. More... | |
class | MGridGenGAMGAgglomeration |
Agglomerate using the MGridGen algorithm. More... | |
class | MichaelisMentenReactionRate |
Michaelis-Menten reaction rate for enzymatic reactions. More... | |
class | midPoint |
Mid-point interpolation (weighting factors = 0.5) scheme class. More... | |
class | minData |
For use with FaceCellWave. Transports minimum passive data. More... | |
class | minEqOp |
class | minEqOp2 |
class | minEqOp< labelPair > |
class | minEqOpFace |
class | minMagSqrEqOp |
class | minMagSqrEqOp2 |
class | minMagSqrOp |
class | minMagSqrOp2 |
class | minMagSqrOp3 |
class | MinmodLimiter |
Class with limiter function which returns the limiter for the Minmod differencing scheme. More... | |
class | minModOp |
class | minModOp2 |
class | minModOp3 |
class | minOp |
class | minOp2 |
class | minOp3 |
class | minusEqOp |
class | minusEqOp2 |
class | minusOp |
class | minusOp2 |
class | minusOp3 |
class | mirrorFvMesh |
class | MixedDiffuseSpecular |
Wall interaction setting microscopic velocity to a random one drawn from a Maxwellian distribution corresponding to a specified temperature for a specified fraction of collisions, and reversing the wall-normal component of the particle velocity for the remainder. More... | |
class | mixedEnergyCalculatedTemperatureFvPatchScalarField |
Base class for temperature boundary conditions in which the parameters of the mixed energy condition can be set directly. More... | |
class | mixedEnergyFvPatchScalarField |
This boundary condition provides a mixed condition for energy. This is selected when the corresponding temperature condition is mixed, or mixedEnergyCalculatedTemperature. More... | |
class | mixedFixedValueSlipFvPatchField |
A mixed boundary type that blends between fixedValue and slip, as opposed to the standard mixed condition that blends between fixedValue and fixedGradient; required to implement maxwellSlipU condition. More... | |
class | mixedFvPatchField |
This boundary condition provides a base class for 'mixed' type boundary conditions, i.e. conditions that mix fixed value and patch-normal gradient conditions. More... | |
class | mixedUnburntEnthalpyFvPatchScalarField |
Mixed boundary condition for unburnt. More... | |
class | mixerFvMesh |
A rotating slider mesh. More... | |
class | mixture |
class | mixtureViscosityModel |
An abstract base class for incompressible mixtureViscosityModels. More... | |
class | molecule |
Foam::molecule. More... | |
class | moleculeCloud |
class | moleFractions |
This function object calculates mole-fraction fields from the mass-fraction fields of the psi/rhoReactionThermo and caches them for output and further post-processing. More... | |
class | momentOfInertia |
Calculates the inertia tensor and principal axes and moments of a polyhedra/cells/triSurfaces. Inertia can either be of the solid body or of a thin shell. More... | |
class | momentumCloud |
Cloud class to introduce momentum parcels. More... | |
class | MomentumCloud |
Templated base class for momentum cloud. More... | |
class | MomentumLookupTableInjection |
Particle injection sources read from look-up table. Each row corresponds to an injection site. More... | |
class | momentumParcel |
Definition of momentum parcel. More... | |
class | MomentumParcel |
Momentum parcel class with rotational motion (as spherical particles only) and one/two-way coupling with the continuous phase. More... | |
class | momentumParcelInjectionData |
Container class to provide injection data for momentum parcels. More... | |
class | momentumParcelInjectionDataIOList |
class | MomentumTransferPhaseSystem |
Class which models interfacial momentum transfer between a number of phases. Drag, virtual mass, lift, wall lubrication and turbulent dispersion are all modelled. The explicit contribution from the drag is omitted from the transfer matrices, as this forms part of the solution of the pressure equation. More... | |
class | momentumTransportModel |
Abstract base class for turbulence models (RAS, LES and laminar). More... | |
class | MomentumTransportModel |
Templated abstract base class for turbulence models. More... | |
class | morphFieldMapper |
Abstract base class to hold the Field mapping for mesh morphs. More... | |
class | motionDiffusivity |
Abstract base class for cell-centre mesh motion diffusivity. More... | |
class | motionDirectionalDiffusivity |
MotionDirectional finite volume mesh motion diffusivity. More... | |
class | motionSmoother |
Given a displacement moves the mesh by scaling the displacement back until there are no more mesh errors. More... | |
class | motionSmootherAlgo |
Given a displacement moves the mesh by scaling the displacement back until there are no more mesh errors. More... | |
class | motionSmootherData |
class | motionSolver |
Virtual base class for mesh motion solver. More... | |
class | motionSolverList |
Motion of the mesh specified as a list of motion solvers. More... | |
class | MoveableMeshObject |
class | movingConeTopoFvMesh |
Sample topoChangerFvMesh that moves an object in x direction and introduces/removes layers. More... | |
class | MovingPhaseModel |
Class which represents a moving fluid phase. Holds the velocity, fluxes and turbulence model and can generate the momentum equation. The interface is quite restrictive as it also has to support an equivalent stationary model, which does not store motion fields or a turbulence model. More... | |
struct | MovingPhaseModelTransportThermoModel |
struct | MovingPhaseModelTransportThermoModel< rhoReactionThermo > |
struct | MovingPhaseModelTransportThermoModel< rhoThermo > |
class | movingWallVelocityFvPatchVectorField |
This boundary condition provides a velocity condition for cases with moving walls. More... | |
class | MPLIC |
Multicut Piecewise-Linear Interface Calculation (MPLIC) corrected scheme is a surface interpolation scheme for flux calculation in advection of a bounded variable, e.g. phase fraction and for interface capturing in the volume of fluid (VoF) method. More... | |
class | MPLICcell |
Class performs geometric matching of volume fraction and calculates surface interpolation of volume fraction field. More... | |
class | MPLICcellStorage |
Provides local cell addressing for geometry and data for MPLIC class. More... | |
class | MPLICface |
Class that deals with cutting faces based on face point values and target value. More... | |
class | MPLICU |
Velocity-weighted Multicut Piecewise-Linear Interface Calculation (MPLICU) corrected scheme is a surface interpolation scheme for flux calculation in advection of a bounded variable, e.g. phase fraction and for interface capturing in the volume of fluid (VoF) method. More... | |
class | MPPICCloud |
Adds MPPIC modelling to clouds. More... | |
class | mppicCloud |
Cloud class to introduce MPPIC parcels. More... | |
class | mppicParcel |
Definition of MPPIC parcel. More... | |
class | MPPICParcel |
Wrapper around parcel types to add MPPIC modelling. More... | |
class | MRFZone |
MRF zone definition based on cell zone and parameters obtained from a control dictionary constructed from the given stream. More... | |
class | MRFZoneList |
List container for MRF zomes. More... | |
class | multiComponentMixture |
Foam::multiComponentMixture. More... | |
class | MultiComponentPhaseModel |
Class which represents a phase with multiple species. Returns the species' mass fractions, and their governing equations. More... | |
class | multiDirRefinement |
Does multiple pass refinement to refine cells in multiple directions. More... | |
class | multiLevelDecomp |
Decomposition given using consecutive application of decomposers. More... | |
class | multiphaseMixture |
Incompressible multi-phase mixture with built in solution for the phase fractions with interface compression for interface-capturing. More... | |
class | multiphaseMixtureThermo |
class | multiplyEqOp |
class | multiplyEqOp2 |
class | multiplyOp |
class | multiplyOp2 |
class | multiplyOp3 |
class | multiplyWeightedOp |
class | multiRegionSolutionControl |
Multi-region-specific derivation of the solution control class. More... | |
class | multiSolidBodyMotionSolver |
Solid-body motion of the mesh specified by a run-time selectable motion function. More... | |
class | multivariateIndependentScheme |
Generic multi-variate discretisation scheme class for which any of the NVD, CNVD or NVDV schemes may be selected for each variable and applied independently. More... | |
class | multivariateScheme |
Generic multi-variate discretisation scheme class which may be instantiated for any of the NVD, CNVD or NVDV schemes. More... | |
class | multivariateSelectionScheme |
Generic multi-variate discretisation scheme class for which any of the NVD, CNVD or NVDV schemes may be selected for each variable. More... | |
class | multivariateSurfaceInterpolationScheme |
Abstract base class for multi-variate surface interpolation schemes. More... | |
class | multivariateUpwind |
Upwind-difference form of the multivariate surfaceInterpolationScheme. More... | |
class | MUSCLLimiter |
Class with limiter function which returns the limiter for the van Leer's MUSCL differencing scheme. More... | |
class | N2 |
Liquid N2. More... | |
class | NamedEnum |
Initialise the NamedEnum HashTable from the static list of names. More... | |
class | nastranSurfaceWriter |
A surface writer for the Nastran file format - both surface mesh and fields. More... | |
class | nbrToCell |
A topoSetSource to select cells based on number of neighbouring cells (i.e. number of internal or coupled faces) More... | |
class | nC3H8O |
propanol More... | |
class | nearestToCell |
A topoSetSource to select cells nearest to points. More... | |
class | nearestToPoint |
A topoSetSource to select points nearest to points. More... | |
class | nearWallDist |
Distance calculation for cells with face on a wall. Searches pointNeighbours to find closest. More... | |
class | nearWallDistNoSearch |
Distance calculation for cells with face on a wall. Does not search anything, just takes normal component of distance. More... | |
class | nil |
A zero-sized class without any storage. Used, for example, in HashSet. More... | |
class | NoAtomisation |
Dummy phase change model for 'none'. More... | |
class | NoBinaryCollision |
No collision BinaryCollision Model. More... | |
class | NoBreakup |
Dummy breakup model for 'none'. More... | |
class | noChemistrySolver |
Dummy chemistry solver for 'none' option. More... | |
class | NoCollision |
Place holder for 'none' option. More... | |
class | NoComposition |
Dummy class for 'none' option - will raise an error if any functions are called that require return values. More... | |
class | noDecomp |
Dummy decomposition method. More... | |
class | NoDevolatilisation |
Dummy devolatilisation model for 'none'. More... | |
class | NoDispersion |
Place holder for 'none' option. More... | |
class | NoHeatTransfer |
Dummy heat transfer model for 'none'. More... | |
class | NoInflow |
Not inserting any particles. More... | |
class | NoInjection |
Place holder for 'none' option. More... | |
class | NoInteraction |
Dummy class for 'none' option - will raise an error if any functions are called that require return values. More... | |
class | noInterfaceCompression |
Wrapper scheme to allow VoF solvers to run efficiently without interface compression, e.g. for cavitation simulations. More... | |
class | noInterfaceCompressionNew |
class | noiseFFT |
FFT of the pressure field. More... | |
class | nonBlockingGaussSeidelSmoother |
Variant of gaussSeidelSmoother that expects processor boundary cells to be sorted last and so can block later. Only when the cells are actually visited does it need the results to be present. It is expected that there is little benefit to be gained from doing this on a patch by patch basis since the number of processor interfaces is quite small and the overhead of checking whether a processor interface is finished might be quite high (call into mpi). Also this would require a dynamic memory allocation to store the state of the outstanding requests. More... | |
class | noneGAMGProcAgglomeration |
Processor agglomeration of GAMGAgglomerations. More... | |
class | NonEquilibriumReversibleReaction |
Simple extension of Reaction to handle reversible reactions using equilibrium thermodynamics. More... | |
class | NonInertialFrameForce |
Calculates particle non-inertial reference frame force. Variable names as from Landau and Lifshitz, Mechanics, 3rd Ed, p126-129. More... | |
class | nonlinearEddyViscosity |
Eddy viscosity turbulence model with non-linear correction base class. More... | |
class | nonOrthogonalSolutionControl |
Non-orthogonal solution control class. Provides non-orthogonal-loop control methods. More... | |
class | NonSphereDragForce |
Drag model for non-spherical particles. More... | |
class | nonUniformField |
class | noOp |
class | nopEqOp |
class | nopEqOp2 |
class | NoPhaseChange |
Dummy phase change model for 'none'. More... | |
class | NoPreconditioner |
Null preconditioner for both symmetric and asymmetric matrices. More... | |
class | noPreconditioner |
Null preconditioner for both symmetric and asymmetric matrices. More... | |
class | normalLess |
To compare normals. More... | |
class | normalToFace |
A topoSetSource to select faces based on normal. More... | |
class | noSlipFvPatchVectorField |
This boundary condition fixes the velocity to zero at walls. More... | |
class | NoStochasticCollision |
Dummy collision model for 'none'. More... | |
class | NoSurfaceFilm |
Place holder for 'none' option. More... | |
class | NoSurfaceReaction |
Dummy surface reaction model for 'none'. More... | |
class | noSurfaceWriter |
A dummy surfaceWriter selected to disable surface writing. More... | |
class | notEqOp |
class | notEqOp2 |
class | notOp |
class | notOp2 |
class | notOp3 |
class | NullMRF |
class | NullObject |
Singleton null-object class and instance. More... | |
class | nutkAtmRoughWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity for atmospheric velocity profiles. It is designed to be used in conjunction with the atmBoundaryLayerInletVelocity boundary condition. The values are calculated using: More... | |
class | nutkRoughWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity condition when using wall functions for rough walls, based on turbulence kinetic energy. The condition manipulates the E parameter to account for roughness effects. More... | |
class | nutkWallFunctionFvPatchScalarField |
Turbulent viscosity wall-function boundary condition for high Reynolds number flows based on near-wall turbulence kinetic energy. More... | |
class | nutLowReWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity condition for use with low Reynolds number models. It sets nut to zero, and provides an access function to calculate y+. More... | |
class | nutURoughWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity condition when using wall functions for rough walls, based on velocity. The condition manipulates the E parameter to account for roughness effects. More... | |
class | nutUSpaldingWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity condition when using wall functions for rough walls, based on velocity, using Spalding's law to give a continuous nut profile to the wall (y+ = 0) More... | |
class | nutUWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity condition when using wall functions, based on velocity. More... | |
class | nutWallFunctionFvPatchScalarField |
This boundary condition provides a turbulent kinematic viscosity condition when using wall functions, based on turbulence kinetic energy. More... | |
class | NVDTVD |
Foam::NVDTVD. More... | |
class | NVDVTVDV |
Foam::NVDVTVDV. More... | |
class | objectFunction1 |
Wrapper around Function1 that constructs a function of type associated with an object found in the database. More... | |
class | objectHit |
This class describes a combination of target object index and success flag. More... | |
class | objectMap |
An objectMap is a pair of labels defining the mapping of an object from another object, e.g. a cell mapped from a point. More... | |
class | objectRegistry |
Registry of regIOobjects. More... | |
class | OBJstream |
OFstream which keeps track of vertices. More... | |
class | ode |
An ODE solver for chemistry. More... | |
class | ODESolver |
Abstract base-class for ODE system solvers. More... | |
class | ODESystem |
Abstract base class for the systems of ordinary differential equations. More... | |
class | offsetOp |
class | offsetOp< face > |
Hash specialisation to offset faces in ListListOps::combineOffset. More... | |
class | offsetOp< labelledTri > |
Hash specialisation to offset faces in ListListOps::combineOffset. More... | |
class | offsetOp< triFace > |
Hash specialisation to offset faces in ListListOps::combineOffset. More... | |
class | OFstream |
Output to file stream. More... | |
class | OFstreamAllocator |
A std::ostream with ability to handle compressed files. More... | |
class | OFstreamCollator |
Threaded file writer. More... | |
class | Omanip |
class | omegaWallFunctionFvPatchScalarField |
This boundary condition provides a wall constraint on turbulnce specific dissipation, omega for both low and high Reynolds number turbulence models. More... | |
class | one |
A class representing the concept of 1 (scalar(1)) used to avoid unnecessary manipulations for objects which are known to be one at compile-time. More... | |
class | oneField |
A class representing the concept of a field of 1 used to avoid unnecessary manipulations for objects which are known to be one at compile-time. More... | |
class | oneFieldField |
A class representing the concept of a field of oneFields used to avoid unnecessary manipulations for objects which are known to be one at compile-time. More... | |
class | OneResistanceHeatTransferPhaseSystem |
Class which models interfacial heat transfer between a number of phases. A single heat transfer model is used for each interface. More... | |
class | oppositeFace |
Class containing opposite face for a prismatic cell with addressing and a possibility of failure. More... | |
class | OppositeFaceCellWave |
Version of FaceCellWave that walks through prismatic cells only. More... | |
class | OPstream |
Output inter-processor communications stream. More... | |
class | orderedPhasePair |
class | orEqOp |
class | orEqOp2 |
class | orientedSurface |
Given point flip all faces such that normals point in same direction. More... | |
class | orOp |
class | orOp2 |
class | orOp3 |
class | ORourkeCollision |
Collision model by P.J. O'Rourke. More... | |
class | oscillatingDisplacementPointPatchVectorField |
Foam::oscillatingDisplacementPointPatchVectorField. More... | |
class | oscillatingVelocityPointPatchVectorField |
Foam::oscillatingVelocityPointPatchVectorField. More... | |
class | osha1stream |
A basic output stream for calculating SHA1 digests. More... | |
class | OSHA1stream |
The output stream for calculating SHA1 digests. More... | |
class | OSPRELimiter |
Class with limiter function which returns the limiter for the OSPRE differencing scheme based on r obtained from the LimiterFunc class. More... | |
class | OSstream |
Generic output stream. More... | |
class | Ostream |
An Ostream is an abstract base class for all output systems (streams, files, token lists, etc). More... | |
class | OStringStream |
Output to memory buffer stream. More... | |
class | outerProduct |
class | outerProduct< Cmpt, SphericalTensor2D< Cmpt > > |
class | outerProduct< Cmpt, SphericalTensor< Cmpt > > |
class | outerProduct< Cmpt, SymmTensor2D< Cmpt > > |
class | outerProduct< Cmpt, SymmTensor< Cmpt > > |
class | outerProduct< SphericalTensor2D< Cmpt >, Cmpt > |
class | outerProduct< SphericalTensor< Cmpt >, Cmpt > |
class | outerProduct< SymmTensor2D< Cmpt >, Cmpt > |
class | outerProduct< SymmTensor< Cmpt >, Cmpt > |
class | outerProduct< Vector2D< Cmpt >, Vector2D< Cmpt > > |
class | outletInletFvPatchField |
This boundary condition provides a generic inflow condition, with specified outflow for the case of reverse flow. More... | |
class | outletMappedUniformInletFvPatchField |
This boundary condition averages the field over the "outlet" patch specified by name "outletPatch" and applies this as the uniform value of the field over this patch. More... | |
class | outletPhaseMeanVelocityFvPatchVectorField |
This boundary condition adjusts the velocity for the given phase to achieve the specified mean thus causing the phase-fraction to adjust according to the mass flow rate. More... | |
class | outletStabilised |
Outlet-stabilised interpolation scheme which applies upwind differencing to the faces of the cells adjacent to outlets. More... | |
class | PackedBoolList |
A bit-packed bool list. More... | |
class | PackedList |
A dynamically allocatable list of packed unsigned integers. More... | |
struct | PackedListCore |
Template-invariant bits for PackedList. More... | |
class | PackingModel |
Base class for packing models. More... | |
class | Pair |
An ordered pair of two objects of type <T> with first() and second() elements. More... | |
class | PairCollision |
class | PairCollisionRecord |
Record of a collision between the particle holding the record and the particle with the stored id. More... | |
class | pairGAMGAgglomeration |
Agglomerate using the pair algorithm. More... | |
class | PairModel |
Templated pair interaction class. More... | |
class | pairPatchAgglomeration |
Primitive patch pair agglomerate method. More... | |
class | pairPotential |
class | pairPotentialList |
class | PairSpringSliderDashpot |
Pair forces between particles colliding with a spring, slider, damper model. More... | |
class | ParamagneticForce |
Calculates particle paramagnetic (magnetic field) force. More... | |
class | ParcelCloud |
Outermost template for parcel clouds. Adds the parcelCloud virtualisation layer and forwards the methods required by that layer. More... | |
class | parcelCloud |
Virtual abstract base class for parcel clouds. As parcelCloudBase but with additional virtualisation of the evolve method, plus some additional methods that are defined below the parcel-cloud layer (i.e., in Cloud). These methods are implemented by forwarding in the ParcelCloud class. More... | |
class | parcelCloudBase |
Virtual abstract base class for parcel clouds. Inserted by ParcelCloudBase into the base of the cloud template hierarchy and adds virtualisation of most methods defined by the clouds. More... | |
class | ParcelCloudBase |
Base template for parcel clouds. Inserts the parcelCloudBase virtualisation layer into the class. Also defines default zero-return source methods to enable the less functional clouds to be used in more complex situations. More... | |
class | parcelCloudList |
List of parcel clouds, with the same interface as an individual parcel cloud. This is the object that should be constructed by a solver in order to support the coupled simulation of multiple clouds. More... | |
class | parcelThermo |
Thermo package for (S)olids (L)iquids and (G)ases Takes reference to thermo package, and provides: More... | |
class | ParRunControl |
Helper class for initialising parallel jobs from the command arguments. More... | |
class | ParSortableList |
Implementation of PSRS parallel sorting routine. More... | |
class | partialFaceAreaWeightAMI |
Partial face area weighted Arbitrary Mesh Interface (AMI) method. More... | |
class | partialSlipFvPatchField |
This boundary condition provides a partial slip condition. The amount of slip is controlled by a user-supplied field. More... | |
class | particle |
Base particle class. More... | |
class | ParticleCollector |
Function object to collect the parcel mass- and mass flow rate over a set of polygons. The polygons can either be specified by sets of user- supplied points, or in a concentric circles arrangement. If a parcel is 'collected', it can be flagged to be removed from the domain using the removeCollected entry. More... | |
class | ParticleErosion |
Function object to create a field of eroded volume, Q, on a specified list of patches. The volume is calculated by the model of Finnie et al. The implementation follows the description given by the review of Yadav et al. More... | |
class | ParticleForce |
Abstract base class for particle forces. More... | |
class | ParticleForceList |
List of particle forces. More... | |
class | ParticleStressModel |
Base class for inter-particle stress models. More... | |
class | ParticleTracks |
Records particle state (all variables) on each call to postFace. More... | |
class | ParticleTrap |
Traps particles within a given phase fraction for multi-phase cases. More... | |
class | passiveParticle |
Copy of base particle. More... | |
class | passiveParticleCloud |
A Cloud of passive particles. More... | |
class | PatchCollisionDensity |
Function object which generates fields of the number and rate of collisions per unit area on all patches. Can optionally take a minimum speed below which a collision is not counted. More... | |
class | patchDataWave |
Takes a set of patches to start MeshWave from. More... | |
class | patchDistanceToCell |
A topoSetSource to select cells based on distance to a set of patches. More... | |
class | patchDistMethod |
Specialisation of patchDist for wall distance calculation. More... | |
class | patchEdgeFaceInfo |
class | patchEdgeFaceRegion |
Transport of region for use in PatchEdgeFaceWave. More... | |
class | patchEdgeFaceRegions |
Transport of regions for use in PatchEdgeFaceWave. More... | |
class | PatchEdgeFaceWave |
Wave propagation of information along patch. Every iteration information goes through one layer of faces. Templated on information that is transferred. More... | |
class | patchFaceOrientation |
Transport of orientation for use in PatchEdgeFaceWave. More... | |
class | PatchFlowRateInjection |
Patch injection, by using patch flow rate to determine concentration and velocity. More... | |
class | patchIdentifier |
Identifies patch by name, patch index and physical type. More... | |
class | PatchInjection |
Patch injection. More... | |
class | patchInjectionBase |
Base class for patch-based injection models. More... | |
class | patchInteractionData |
Helper class for the LocalInteraction patch interaction model. More... | |
class | patchInteractionDataList |
List container for patchInteractionData class. More... | |
class | PatchInteractionModel |
Templated patch interaction model class. More... | |
class | PatchMeshObject |
class | patchPatchDist |
Like wallDist but calculates on a patch the distance to nearest neighbouring patches. Uses PatchEdgeFaceWave to do actual calculation. More... | |
class | PatchPostProcessing |
Standard post-processing. More... | |
class | patchProbes |
Set of locations to sample.at patches. More... | |
class | patchToFace |
A topoSetSource to select faces based on usage in patches. More... | |
class | PatchTools |
A collection of tools for searching, sorting PrimitivePatch information. More... | |
class | PatchToPatchInterpolation |
Interpolation class dealing with transfer of data between two primitivePatches. More... | |
class | patchToPoly2DMesh |
Convert a primitivePatch into a 2D polyMesh. More... | |
class | patchWave |
Takes a set of patches to start MeshWave from. After construction holds distance at cells and distance at patches. Is e.g. used by wallDist to construct volScalarField with correct distance to wall. More... | |
class | patchWriter |
Write patch fields. More... | |
class | patchZones |
Calculates zone number for every face of patch. More... | |
class | PBiCCCG |
Preconditioned bi-conjugate gradient solver for asymmetric lduMatrices using a run-time selectable preconditioner. More... | |
class | PBiCG |
Preconditioned bi-conjugate gradient solver for asymmetric lduMatrices using a run-time selectable preconditioner. More... | |
class | PBiCGStab |
Preconditioned bi-conjugate gradient stabilised solver for asymmetric lduMatrices using a run-time selectable preconditioner. More... | |
class | PBiCICG |
Preconditioned bi-conjugate gradient solver for asymmetric lduMatrices using a run-time selectable preconditioner. More... | |
class | PCG |
Preconditioned conjugate gradient solver for symmetric lduMatrices using a run-time selectable preconditioner. More... | |
class | PCICG |
Preconditioned conjugate gradient solver for symmetric lduMatrices using a run-time selectable preconditioner. More... | |
class | PDRDragModel |
Base-class for sub-grid obstacle drag models. The available drag model is at basic.H. More... | |
class | PengRobinsonGas |
PengRobinsonGas gas equation of state. More... | |
class | perfectFluid |
Simple extension of the perfect gas equation of state to liquids by the addition of a constant density off-set. More... | |
class | perfectGas |
Perfect gas equation of state. More... | |
class | perfectInterface |
Hack of attachDetach to couple patches when they perfectly align. Does not decouple. Used by stitchMesh app. Does geometric matching. More... | |
class | phase |
Single incompressible phase derived from the phase-fraction. Used as part of the multiPhaseMixture for interface-capturing multi-phase simulations. More... | |
class | PhaseChangeModel |
Templated phase change model class. More... | |
class | PhaseCompressibleMomentumTransportModel |
Templated abstract base class for multiphase compressible turbulence models. More... | |
class | phaseHydrostaticPressureFvPatchScalarField |
This boundary condition provides a phase-based hydrostatic pressure condition, calculated as: More... | |
class | PhaseIncompressibleMomentumTransportModel |
Templated abstract base class for multiphase incompressible turbulence models. More... | |
class | phaseModel |
Single incompressible phase derived from the phase-fraction. Used as part of the multiPhaseMixture for interface-capturing multi-phase simulations. More... | |
class | phasePair |
class | phasePairKey |
class | phaseProperties |
Helper class to manage multi-specie phase properties. More... | |
class | phasePropertiesList |
Simple container for a list of phase properties. More... | |
class | phaseSurfaceArrheniusReactionRate |
A modified Arrhenius reaction rate given by: More... | |
class | phaseSystem |
Class to represent a system of phases and model interfacial transfers between them. More... | |
class | PhaseThermophysicalTransportModel |
Templated base class for multiphase thermophysical transport models. More... | |
class | phaseTransferModel |
class | PhaseTransferPhaseSystem |
Class which models non-thermally-coupled or weakly thermally coupled mass transfers. More... | |
class | PhiLimiter |
Class with limiter function which returns the limiter for the Phi differencing scheme. More... | |
class | PhiScheme |
Class to create the weighting-factors based on the face-flux. More... | |
class | piecewiseLinearRamp |
A linear ramp between 0 and 1 with definable start and end points. More... | |
class | PilchErdman |
Particle secondary breakup model, based on the reference: More... | |
class | pimpleControl |
Pimple control class. Provides time-loop control methods which exit the simulation once convergence criteria have been reached. Also provides Pimple-loop control methods which exit the iteration once corrector convergence criteria have been met. Example usage: More... | |
class | pimpleLoop |
Pimple loop class. Implements the logic which controls the pimple loop generically for a given corrector convergence control. Can therefore be used be either single- or multi-region control classes. More... | |
class | pimpleMultiRegionControl |
Pimple multi-region control class. As Foam::pimpleControl, but for a multi- region simulation comprising pimple and solid regions. More region types could be added. More... | |
class | pimpleNoLoopControl |
Pimple no-loop control class. Implements various option flags, but leaves loop controls to the derivation or owner. Can be derived into a "full" pimple control or can be owned by a multi-region pimple class. More... | |
class | pisoControl |
Piso control class. Provides time-loop and piso-loop control methods. No convergence checking is done. More... | |
class | plane |
Geometric class that creates a 2D plane and can return the intersection point between a line and the plane. More... | |
class | planeToFaceZone |
A topoSetSource to select faces based on the adjacent cell centres spanning a given plane. The plane is defined by a point and normal vector. More... | |
class | plenumPressureFvPatchScalarField |
This boundary condition provides a plenum pressure inlet condition. This condition creates a zero-dimensional model of an enclosed volume of gas upstream of the inlet. The pressure that the boundary condition exerts on the inlet boundary is dependent on the thermodynamic state of the upstream volume. The upstream plenum density and temperature are time-stepped along with the rest of the simulation, and momentum is neglected. The plenum is supplied with a user specified mass flow and temperature. More... | |
class | PlessisMasliyahDragForce |
Plessis-Masliyah drag model for spheres. More... | |
class | PLIC |
Piecewise-Linear Interface Calculation (PLIC) corrected scheme is a surface interpolation scheme for flux calculation in advection of a bounded variable, e.g. phase fraction and for interface capturing in the volume of fluid (VoF) method. More... | |
class | PLICU |
Velocity-weighted Piecewise-Linear Interface Calculation (PLICU) corrected scheme is a surface interpolation scheme for flux calculation in advection of a bounded variable, e.g. phase fraction and for interface capturing in the volume of fluid (VoF) method. More... | |
class | plusEqMagSqrOp |
class | plusEqMagSqrOp2 |
class | plusEqOp |
class | plusEqOp2 |
class | plusOp |
class | plusOp2 |
class | plusOp3 |
class | pointBoundaryMesh |
Foam::pointBoundaryMesh. More... | |
class | pointBoundaryMeshMapper |
Foam::pointBoundaryMeshMapper. More... | |
class | pointConstraint |
Accumulates point constraints through successive applications of the applyConstraint function. More... | |
class | pointConstraints |
Application of (multi-)patch point constraints. More... | |
class | pointConversion |
Conversion functions between point (Foam::) and Point (CGAL::) More... | |
class | pointData |
Variant of pointEdgePoint with some transported additional data. WIP - should be templated on data like wallDistData. Passive vector v_ is not a coordinate (so no enterDomain/leaveDomain transformation needed) More... | |
class | pointEdgeCollapse |
Determines length of string of edges walked to point. More... | |
class | pointEdgePoint |
Holds information regarding nearest wall point. Used in PointEdgeWave. (so not standard FaceCellWave) To be used in wall distance calculation. More... | |
class | pointEdgeStructuredWalk |
Determines length of string of edges walked to point. More... | |
class | PointEdgeWave |
Wave propagation of information through grid. Every iteration information goes through one layer of edges. More... | |
class | pointFeatureEdgesTypes |
Hold the types of feature edges attached to the point. More... | |
class | pointFieldDecomposer |
Point field decomposer. More... | |
class | pointFieldReconstructor |
Point field reconstructor. More... | |
class | pointFile |
Inserts points at locations specified in a pointFile into the surfaces to be conformed to of the conformalVoronoiMesh. More... | |
class | PointHit |
This class describes the interaction of a face and a point. It carries the info of a successful hit and (if successful), returns the interaction point. More... | |
class | pointHitSort |
Container for sorting intersections. More... | |
class | PointIndexHit |
This class describes the interaction of (usually) a face and a point. It carries the info of a successful hit and (if successful), returns the interaction point. More... | |
class | pointLinear |
Face-point interpolation scheme class derived from linear and returns linear weighting factors but also applies an explicit correction. More... | |
class | pointMapper |
This object provides mapping and fill-in information for point data between the two meshes after the topological change. It is constructed from mapPolyMesh. More... | |
class | pointMesh |
Mesh representing a set of points created from polyMesh. More... | |
class | pointMeshMapper |
Class holds all the necessary information for mapping fields associated with pointMesh. More... | |
class | pointMVCWeight |
Container to calculate weights for interpolating directly from vertices of cell using Mean Value Coordinates. More... | |
class | pointPairs |
HashSet of unique edges. The edges are stored as a pair of pairs: More... | |
class | pointPatch |
Basic pointPatch represents a set of points from the mesh. More... | |
class | pointPatchDist |
Calculation of distance to nearest patch for all points. More... | |
class | pointPatchField |
Abstract base class for point-mesh patch fields. More... | |
class | pointPatchFieldMapper |
Foam::pointPatchFieldMapper. More... | |
class | pointPatchFieldMapperPatchRef |
Foam::pointPatchFieldMapperPatchRef. More... | |
class | pointPatchMapper |
Mapping class for a pointPatchField. More... | |
class | points0MotionSolver |
Virtual base class for displacement motion solvers. More... | |
class | pointSet |
A set of point labels. More... | |
class | pointToCell |
A topoSetSource to select cells based on usage of points. More... | |
class | pointToFace |
A topoSetSource to select faces based on use of points. More... | |
class | pointTopoDistanceData |
For use with PointEdgeWave. Determines topological distance to starting points. More... | |
class | pointToPoint |
A topoSetSource to select points based on usage in pointSet. More... | |
class | pointToPointPlanarInterpolation |
Interpolates between two sets of unstructured points using 2D Delaunay triangulation. Used in e.g. timeVaryingMapped bcs. More... | |
class | pointZone |
A subset of mesh points. The labels of points in the zone can be obtained from the addressing() list. More... | |
class | pointZoneSet |
Like pointSet but -reads data from pointZone -updates pointZone when writing. More... | |
class | polyAddCell |
Class containing data for cell addition. More... | |
class | polyAddFace |
A face addition data class. A face can be inflated either from a point or from another face and can either be in internal or a boundary face. More... | |
class | polyAddPoint |
Class containing data for point addition. More... | |
class | polyBoundaryMesh |
Foam::polyBoundaryMesh. More... | |
class | polyBoundaryMeshEntries |
Foam::polyBoundaryMeshEntries. More... | |
class | polyDualMesh |
Creates dual of polyMesh. More... | |
class | polygonTriangulate |
Triangulation of three-dimensional polygons. More... | |
class | polyLine |
A series of straight line segments, which can also be interpreted as a series of control points for splines, etc. More... | |
class | polyMesh |
Mesh consisting of general polyhedral cells. More... | |
class | polyMeshAdder |
Adds two meshes without using any polyMesh morphing. More... | |
class | polyMeshFilter |
Remove the edges and faces of a polyMesh whilst satisfying the given mesh quality criteria. More... | |
class | polyMeshFilterSettings |
Class to store the settings for the polyMeshFilter class. More... | |
class | polyMeshModifier |
Virtual base class for mesh modifiers. More... | |
class | polyMeshTetDecomposition |
Tools for performing the minimum decomposition of faces of the mesh into triangles so that the cells may be tet decomposed. Includes functions for finding variable face starting (base) points on each face to avoid the decomposition of cells into tets that have negative or zero volume. More... | |
class | polyMeshTools |
class | polyModifyCell |
Class describing modification of a cell. More... | |
class | polyModifyFace |
Class describing modification of a face. More... | |
class | polyModifyPoint |
Class describing modification of a point. More... | |
class | Polynomial |
Polynomial templated on size (order): More... | |
class | polynomialSolidTransport |
Transport package using polynomial functions for solid kappa . More... | |
class | polynomialTransport |
Transport package using polynomial functions for mu and kappa . More... | |
class | polyPatch |
A patch is a list of labels that address the faces in the global face list. More... | |
class | polyRemoveCell |
Class containing data for cell removal. More... | |
class | polyRemoveFace |
Class containing data for face removal. More... | |
class | polyRemovePoint |
Class containing data for point removal. More... | |
class | polyTopoChange |
Direct mesh changes based on v1.3 polyTopoChange syntax. More... | |
class | polyTopoChanger |
List of mesh modifiers defining the mesh dynamics. More... | |
class | PopulationBalancePhaseSystem |
Class which provides population balance functionality. More... | |
class | porosityModel |
Top level model for porosity models. More... | |
class | porosityModelList |
List container for porosity models. More... | |
class | porousBafflePressureFvPatchField |
This boundary condition provides a jump condition, using the cyclic condition as a base. More... | |
class | potential |
class | powerSeriesReactionRate |
Power series reaction rate. More... | |
class | powProduct |
class | prefixOSstream |
Version of OSstream which prints a prefix on each line. More... | |
class | pressureDirectedInletOutletVelocityFvPatchVectorField |
This velocity inlet/outlet boundary condition is applied to pressure boundaries where the pressure is specified. A zero-gradient condition is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with the specified inlet direction. More... | |
class | pressureDirectedInletVelocityFvPatchVectorField |
This velocity inlet boundary condition is applied to patches where the pressure is specified. The inflow velocity is obtained from the flux with the specified inlet direction" direction. More... | |
class | pressureFvPatchScalarField |
Static pressure boundary condition. More... | |
class | PressureGradientForce |
Calculates particle pressure gradient force. More... | |
class | pressureInletOutletParSlipVelocityFvPatchVectorField |
This velocity inlet/outlet boundary condition for pressure boundary where the pressure is specified. A zero-gradient is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with the specified inlet direction. More... | |
class | pressureInletOutletVelocityFvPatchVectorField |
This velocity inlet/outlet boundary condition is applied to pressure boundaries where the pressure is specified. A zero-gradient condition is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the patch-face normal component of the internal-cell value. More... | |
class | pressureInletUniformVelocityFvPatchVectorField |
This velocity inlet boundary condition is applied to patches where the pressure is specified. The uniform inflow velocity is obtained by averaging the flux over the patch, and then applying it in the direction normal to the patch faces. More... | |
class | pressureInletVelocityFvPatchVectorField |
This velocity inlet boundary condition is applied to patches where the pressure is specified. The inflow velocity is obtained from the flux with a direction normal to the patch faces. More... | |
class | pressureNormalInletOutletVelocityFvPatchVectorField |
This velocity inlet/outlet boundary condition is applied to patches where the pressure is specified. A zero-gradient condition is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with a direction normal to the patch faces. More... | |
class | pressureReference |
Provides controls for the pressure reference in closed-volume simulations. More... | |
class | PrghPressureFvPatchScalarField |
This boundary condition provides the p_rgh equivalent of a pressure boundary condition calculated as: More... | |
class | prghTotalHydrostaticPressureFvPatchScalarField |
This boundary condition provides static pressure condition for p_rgh, calculated as: More... | |
class | primitiveEntry |
A keyword and a list of tokens is a 'primitiveEntry'. An primitiveEntry can be read, written and printed, and the types and values of its tokens analysed. More... | |
class | primitiveMesh |
Cell-face mesh analysis engine. More... | |
class | primitiveMeshTools |
class | PrimitivePatch |
A list of faces which address into the list of points. More... | |
class | PrimitivePatchInterpolation |
Interpolation class within a primitive patch. Allows interpolation from points to faces and vice versa. More... | |
class | PrintTable |
Print a table in parallel, e.g.;. More... | |
class | prismMatcher |
A cellMatcher for prism cells. More... | |
class | probes |
Set of locations to sample. More... | |
class | processorCyclicFvPatch |
Processor patch. More... | |
class | processorCyclicFvPatchField |
This boundary condition enables processor communication across cyclic patches. More... | |
class | processorCyclicFvsPatchField |
Foam::processorCyclicFvsPatchField. More... | |
class | processorCyclicGAMGInterface |
GAMG agglomerated processor interface. More... | |
class | processorCyclicGAMGInterfaceField |
GAMG agglomerated processor interface field. More... | |
class | processorCyclicPointPatch |
Processor patch boundary needs to be such that the ordering of points in the patch is the same on both sides. More... | |
class | processorCyclicPointPatchField |
Foam::processorCyclicPointPatchField. More... | |
class | processorCyclicPolyPatch |
Neighbour processor patch. More... | |
class | processorFvPatch |
Processor patch. More... | |
class | processorFvPatchField |
This boundary condition enables processor communication across patches. More... | |
class | processorFvsPatchField |
Foam::processorFvsPatchField. More... | |
class | processorGAMGInterface |
GAMG agglomerated processor interface. More... | |
class | processorGAMGInterfaceField |
GAMG agglomerated processor interface field. More... | |
class | processorLduInterface |
An abstract base class for processor coupled interfaces. More... | |
class | processorLduInterfaceField |
Abstract base class for processor coupled interfaces. More... | |
class | processorMeshes |
Container for processor mesh addressing. More... | |
class | processorPointPatch |
Processor patch boundary needs to be such that the ordering of points in the patch is the same on both sides. More... | |
class | processorPointPatchField |
Foam::processorPointPatchField. More... | |
class | processorPolyPatch |
Neighbour processor patch. More... | |
class | ProcessorTopology |
Determines processor-processor connection. After instantiation contains on all processors the processor-processor connection table. More... | |
class | procFacesGAMGProcAgglomeration |
Processor agglomeration of GAMGAgglomerations. Needs nAgglomeratingCells which is when to start agglomerating processors. Processors get agglomerated by constructing a single cell mesh for each processor with each processor interface a face. This then gets agglomerated using the pairGAMGAgglomeration algorithm with the number of faces on the original processor interface as face weight. More... | |
class | procLduInterface |
IO interface for processorLduInterface. More... | |
class | procLduMatrix |
I/O for lduMatrix and interface values. More... | |
class | procLess |
Less operator for pairs of <processor><index> More... | |
class | profileModel |
Base class for profile models. More... | |
class | profileModelList |
List of profile models. More... | |
class | projectCurveEdge |
Defines the edge from the projection onto a surface (single surface) or intersection of two surfaces. More... | |
class | projectEdge |
Defines the edge from the projection onto a surface (single surface) or intersection of two surfaces. More... | |
class | proxySurfaceWriter |
A surfaceWriter that writes the geometry via the MeshedSurfaceProxy, but which does not support any fields. More... | |
class | psiReactionThermo |
Base-class for multi-component fluid thermodynamic properties based on compressibility. More... | |
class | psiThermo |
Base-class for fluid thermodynamic properties based on compressibility. More... | |
class | psiuReactionThermo |
Base-class for combustion fluid thermodynamic properties based on compressibility. More... | |
class | Pstream |
Inter-processor communications stream. More... | |
class | PstreamBuffers |
Buffers for inter-processor communications streams (UOPstream, UIPstream). More... | |
class | pTraits |
Traits class for primitives. More... | |
class | pTraits< bool > |
class | pTraits< edge > |
Template specialisation for pTraits<edge> so we can use syncTools. More... | |
class | pTraits< face > |
class | pTraits< Field< T > > |
class | pTraits< int32_t > |
Template specialisation for pTraits<int32_t> More... | |
class | pTraits< int64_t > |
Template specialisation for pTraits<int64_t> More... | |
class | pTraits< labelList > |
Template specialisation for pTraits<labelList> so we can have fields. More... | |
class | pTraits< List< T > > |
class | pTraits< Scalar > |
class | pTraits< uint32_t > |
Template specialisation for pTraits<uint32_t> More... | |
class | pTraits< uint64_t > |
Template specialisation for pTraits<uint64_t> More... | |
class | pTraits< UList< T > > |
class | pTraits< vectorList > |
Template specialisation for pTraits<labelList> so we can have fields. More... | |
class | PtrDictionary |
Template dictionary class which manages the storage associated with it. More... | |
class | PtrList |
A templated 1D list of pointers to objects of type <T>, where the size of the array is known and used for subscript bounds checking, etc. More... | |
class | PtrListDictionary |
Template dictionary class which manages the storage associated with it. More... | |
class | PtrMap |
A HashTable of pointers to objects of type <T> with a label key. More... | |
class | ptscotchDecomp |
PTScotch domain decomposition. For the main details about how to define the strategies, see scotchDecomp. More... | |
class | pureMixture |
Foam::pureMixture. More... | |
class | PurePhaseModel |
Class which represents pure phases, i.e. without any species. Returns an empty list of mass fractions. More... | |
class | pureUpwindCFCCellToFaceStencilObject |
class | PureUpwindFitScheme |
Upwind biased fit surface interpolation scheme that applies an explicit correction to upwind. More... | |
class | pyramid |
A geometric pyramid primitive with a base of 'n' sides: i.e. a parametric pyramid. A pyramid is constructed from a base polygon and an apex point. More... | |
class | pyrMatcher |
A cellMatcher for pyr cells. More... | |
class | QRMatrix |
Class templated on matrix type to perform the QR decomposition using Householder reflections on a square or rectangular matrix. More... | |
class | quadraticDiffusivity |
Mesh motion diffusivity maipulator which returns the sqr of the given diffusivity. More... | |
class | quadraticEqn |
Quadratic equation of the form a*x^2 + b*x + c = 0. More... | |
class | quadraticFitPolynomial |
Quadratic polynomial for centred interpolation fitting. More... | |
class | quadraticLinearFitPolynomial |
Quadratic/linear polynomial for interpolation fitting: quadratic normal to the face, linear in the plane of the face for consistency with 2nd-order Gauss. More... | |
class | quadraticLinearUpwindFitPolynomial |
Quadratic polynomial for upwind biased interpolation fitting. More... | |
class | quadraticUpwindFitPolynomial |
Quadratic polynomial for upwind biased interpolation fitting. More... | |
class | quaternion |
Quaternion class used to perform rotations in 3D space. More... | |
class | QUICKLimiter |
Class with limiter function which returns the limiter for the quadratic-upwind differencing scheme. More... | |
class | QUICKVLimiter |
Class with limiter function which returns the limiter for the quadratic-upwind differencing scheme. More... | |
class | radiationCoupledBase |
Common functions to emissivity. It gets supplied from lookup into a dictionary or calculated by the solidThermo: More... | |
class | radiationModel |
Top level model for radiation modelling. More... | |
class | rampHoldFall |
Piecewise linear function with a ramp from a start value to a plateaux value, holding at this, then a linear fall to an end value. More... | |
class | Random |
Random number generator. More... | |
class | randomRenumber |
Random renumber. Just to see effect of renumbering. More... | |
class | RanzMarshall |
The Ranz-Marshall correlation for heat transfer. More... | |
class | RASModel |
Templated abstract base class for RAS turbulence models. More... | |
class | RASThermophysicalTransportModel |
Templated abstract base class for RAS thermophysical transport models. More... | |
class | rawGraph |
A raw xy graph output. More... | |
class | rawSetWriter |
class | rawSurfaceWriter |
A surfaceWriter for raw output. More... | |
class | rawTopoChangerFvMesh |
topoChangerFvMesh without any added functionality. More... | |
class | rayShooting |
class | reactingCloud |
Cloud class to introduce reacting parcels. More... | |
class | ReactingCloud |
Templated base class for reacting cloud. More... | |
class | ReactingLookupTableInjection |
Particle injection sources read from look-up table. Each row corresponds to an injection site. More... | |
class | reactingMultiphaseCloud |
Cloud class to introduce multi-phase reacting parcels. More... | |
class | ReactingMultiphaseCloud |
Templated base class for multiphase reacting cloud. More... | |
class | ReactingMultiphaseLookupTableInjection |
Particle injection sources read from look-up table. Each row corresponds to an injection site. More... | |
class | reactingMultiphaseParcel |
Definition of reacting parcel. More... | |
class | ReactingMultiphaseParcel |
Multiphase variant of the reacting parcel class with one/two-way coupling with the continuous phase. More... | |
class | reactingMultiphaseParcelInjectionData |
Container class to provide injection data for reacting multiphase parcels. More... | |
class | reactingMultiphaseParcelInjectionDataIOList |
class | reactingParcel |
Definition of reacting parcel. More... | |
class | ReactingParcel |
Reacting parcel class with one/two-way coupling with the continuous phase. More... | |
class | reactingParcelInjectionData |
Container class to provide injection data for reacting parcels. More... | |
class | reactingParcelInjectionDataIOList |
class | ReactingPhaseModel |
Class which represents phases with volumetric reactions. Returns the reaction rate and heat. More... | |
class | reaction |
Reaction base-class holding the specie names and coefficients. More... | |
class | Reaction |
Simple extension of ReactionThermo to handle reaction kinetics in addition to the equilibrium thermodynamics already handled. More... | |
class | ReactionList |
List of templated reactions. More... | |
class | ReactionProxy |
Proxy version of Reaction which provides dummy implementations of the abstract virtual functions. More... | |
class | reactionRateFlameArea |
Abstract class for reaction rate per flame area unit. More... | |
class | Rebound |
Simple rebound patch interaction model. More... | |
class | RectangularMatrix |
A templated 2D rectangular m x n matrix of objects of <Type>. More... | |
class | reducedUnits |
class | reduceFileStates |
Reduction operator for PackedList of fileState. More... | |
class | refCount |
Reference counter for various OpenFOAM components. More... | |
class | referredWallFace |
Storage for referred wall faces. Stores patch index, face and associated points. More... | |
class | refineCell |
Container with cells to refine. Refinement given as single direction. More... | |
class | refinementData |
Transfers refinement levels such that slow transition between levels is maintained. Used in FaceCellWave. More... | |
class | refinementDistanceData |
Transfers refinement levels such that slow transition between levels is maintained. Used in FaceCellWave. More... | |
class | refinementFeatures |
Encapsulates queries for features. More... | |
class | refinementHistory |
All refinement history. Used in unrefinement. More... | |
class | refinementHistoryConstraint |
Constraint to keep all cells originating from refining the same cell onto the same processor. Reads polyMesh/refinementHistory. More... | |
class | refinementIterator |
Utility class to do iterating meshCutter until all requests satisfied. More... | |
class | refinementParameters |
Simple container to keep together refinement specific information. More... | |
class | refinementRegions |
Encapsulates queries for volume refinement ('refine all cells within shell'). More... | |
class | refinementSurfaces |
Container for data on surfaces used for surface-driven refinement. Contains all the data about the level of refinement needed per surface. More... | |
class | regExp |
Wrapper around POSIX extended regular expressions. More... | |
class | regionCoupledBase |
Base class with common functionality for regionCoupled polyPatch. It includes AMI. More... | |
class | regionCoupledBaseFvPatch |
Base class of regionCoupledFvPatch with common functionality for regionCoupledFvPatch and regionCoupledWallFvPatch. More... | |
class | regionCoupledBaseGAMGInterface |
Base class for GAMG agglomerated coupled region interface. More... | |
class | regionCoupledFvPatch |
Common functionality for regionCoupleFvPatch and regionCoupledWallFvPatch. More... | |
class | regionCoupledGAMGInterface |
GAMG agglomerated coupled region interface. More... | |
class | regionCoupledGAMGInterfaceField |
GAMG agglomerated region coupled interface field. More... | |
class | regionCoupledLduInterface |
An abstract base class for region coupled interfaces. More... | |
class | regionCoupledPointPatch |
Cyclic AMI point patch - place holder only. More... | |
class | regionCoupledPolyPatch |
Region coupled polyPatch. More... | |
class | regionCoupledWallFvPatch |
Foam::regionCoupledWallFvPatch. More... | |
class | regionCoupledWallGAMGInterface |
GAMG agglomerated coupled region interface. More... | |
class | regionCoupledWallGAMGInterfaceField |
GAMG agglomerated region coupled interface field. More... | |
class | regionCoupledWallPointPatch |
Cyclic AMI point patch - place holder only. More... | |
class | regionCoupledWallPolyPatch |
regionCoupledWall More... | |
class | regionProperties |
Simple class to hold region information for coupled region simulations. More... | |
class | regionSide |
Determines the 'side' for every face and connected to a singly-connected (through edges) region of faces. Gets set of faces and a list of mesh edges ('fenceEdges') which should not be crossed. Used in splitting a mesh region. More... | |
class | regionSplit |
This class separates the mesh into distinct unconnected regions, each of which is then given a label according to globalNumbering(). More... | |
class | regionToCell |
TopoSetSource. Select cells belonging to topological connected region (that contains given points) More... | |
class | regionToFace |
A topoSetSource to select faces belonging to topological connected region (that contains given point) More... | |
class | regIOobject |
regIOobject is an abstract class derived from IOobject to handle automatic object registration with the objectRegistry. More... | |
class | ReitzDiwakar |
secondary breakup model More... | |
class | ReitzKHRT |
secondary breakup model which uses the Kelvin-Helmholtz instability theory to predict the 'stripped' droplets... and the Raleigh-Taylor instability as well. More... | |
class | RelativeVelocity |
Function object which generates a lagrangian field containing the velocity of each particle relative to the velocity of the surrounding fluid. More... | |
class | relativeVelocityModel |
class | relaxationModel |
Abstract base class for providing relaxation values to the cell motion controller. More... | |
class | removeCells |
Given list of cells to remove insert all the topology changes. More... | |
class | removeFaces |
Given list of faces to remove insert all the topology changes. Contains helper function to get consistent set of faces to remove. More... | |
class | removePoints |
Removes selected points from mesh and updates faces using these points. More... | |
class | renumberMethod |
Abstract base class for renumbering. More... | |
class | repatchMesh |
Addressing for all faces on surface of mesh. Can either be read from polyMesh or from triSurface. Used for repatching existing meshes. More... | |
class | repatchPatch |
Like polyPatch but without reference to mesh. patchIdentifier::index is not used. Used in repatchMesh to hold data on patches. More... | |
class | repatchPolyTopoChanger |
A mesh which allows changes in the patch distribution of the boundary faces. The change in patching is set using changePatchID. For a boundary face, a new patch ID is given. More... | |
class | Residuals |
MeshObject to store the solver performance residuals of all the fields of the type it is instantiated on. More... | |
class | reuseTmp |
class | reuseTmp< TypeR, TypeR > |
class | reuseTmpDimensionedField |
class | reuseTmpDimensionedField< TypeR, TypeR, GeoMesh > |
class | reuseTmpFieldField |
class | reuseTmpFieldField< Field, TypeR, TypeR > |
class | reuseTmpGeometricField |
class | reuseTmpGeometricField< TypeR, TypeR, PatchField, GeoMesh > |
class | reuseTmpTmp |
class | reuseTmpTmp< TypeR, Type1, Type12, TypeR > |
class | reuseTmpTmp< TypeR, TypeR, TypeR, Type2 > |
class | reuseTmpTmp< TypeR, TypeR, TypeR, TypeR > |
class | reuseTmpTmpDimensionedField |
class | reuseTmpTmpDimensionedField< TypeR, Type1, TypeR, GeoMesh > |
class | reuseTmpTmpDimensionedField< TypeR, TypeR, Type2, GeoMesh > |
class | reuseTmpTmpDimensionedField< TypeR, TypeR, TypeR, GeoMesh > |
class | reuseTmpTmpFieldField |
class | reuseTmpTmpFieldField< Field, TypeR, Type1, TypeR > |
class | reuseTmpTmpFieldField< Field, TypeR, TypeR, Type2 > |
class | reuseTmpTmpFieldField< Field, TypeR, TypeR, TypeR > |
class | reuseTmpTmpGeometricField |
class | reuseTmpTmpGeometricField< TypeR, Type1, TypeR, PatchField, GeoMesh > |
class | reuseTmpTmpGeometricField< TypeR, TypeR, Type2, PatchField, GeoMesh > |
class | reuseTmpTmpGeometricField< TypeR, TypeR, TypeR, PatchField, GeoMesh > |
class | reverseLinear |
Inversed weight central-differencing interpolation scheme class. More... | |
class | ReversibleReaction |
Simple extension of Reaction to handle reversible reactions using equilibrium thermodynamics. More... | |
class | ReynoldsStress |
Reynolds-stress turbulence model base class. More... | |
class | rhoConst |
RhoConst (rho = const) of state. More... | |
class | rhoReactionThermo |
Base-class for multi-component fluid thermodynamic properties based on density. More... | |
class | rhoTabulated |
Incompressible of equation of state using uniform tabulated density vs pressure and temperature. More... | |
class | rhoThermo |
Base-class for fluid thermodynamic properties based on density. More... | |
class | rigidBodyMeshMotion |
Rigid-body mesh motion solver for fvMesh. More... | |
class | rigidBodyMeshMotionSolver |
Rigid-body mesh motion solver for fvMesh. More... | |
class | RKCK45 |
4/5th Order Cash-Karp Runge-Kutta ODE solver. More... | |
class | RKDP45 |
4/5th Order Dormand–Prince Runge-Kutta ODE solver. More... | |
class | RKF45 |
4/5th Order Runge-Kutta-Fehlberg ODE solver More... | |
class | rodas23 |
L-stable, stiffly-accurate embedded Rosenbrock ODE solver of order (2)3. More... | |
class | rodas34 |
L-stable, stiffly-accurate embedded Rosenbrock ODE solver of order (3)4. More... | |
class | Roots |
Templated storage for the roots of polynomial equations, plus flags to indicate the nature of the roots. More... | |
class | Rosenbrock12 |
L-stable embedded Rosenbrock ODE solver of order (1)2. More... | |
class | Rosenbrock23 |
L-stable embedded Rosenbrock ODE solver of order (2)3. More... | |
class | Rosenbrock34 |
L-stable embedded Rosenbrock ODE solver of order (3)4. More... | |
class | rotatedBoxToCell |
A topoSetSource to select cells based on cell centres inside rotated/skewed box (parallelopiped?). More... | |
class | rotatingPressureInletOutletVelocityFvPatchVectorField |
This velocity inlet/outlet boundary condition is applied to patches in a rotating frame where the pressure is specified. A zero-gradient is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with a direction normal to the patch faces. More... | |
class | rotatingTotalPressureFvPatchScalarField |
This boundary condition provides a total pressure condition for patches in a rotating frame. More... | |
class | rotatingWallVelocityFvPatchVectorField |
Condition on velocity for a boundary consisting of a rotating solid of revolution, e.g. cylinder. Calculates a tangential component of velocity from the angular velocity and rotational axis and ensures a zero normal component. More... | |
class | RowVector |
Templated 3D row-vector derived from MatrixSpace adding construction from 3 components and element access using x(), y() and z(). More... | |
class | rPolynomial |
Reciprocal polynomial equation of state for liquids and solids. More... | |
class | SaffmanMeiLiftForce |
Saffman-Mei particle lift force model applicable to spherical particles. More... | |
class | sammMesh |
A messy mesh class which supports the possibility of creating a shapeMesh for regular Samm meshes (no arbitrary interfaces or collapsed SAMM cells). If any of these special features exist, the mesh is created as polyMesh. More... | |
class | sampledSet |
Holds list of sampling points which is filled at construction time. Various implementations of this base class to e.g. get sampling points at uniform distance along a line (lineUniformSet) or directly specified (pointsSet) More... | |
class | sampledSets |
Set of sets to sample. Call sampledSets.write() to sample&write files. More... | |
class | sampledSurface |
An abstract class for surfaces with sampling. More... | |
class | saturationModel |
class | scalarMatrices |
Scalar matrices. More... | |
class | scalarProduct |
class | scalarRange |
A scalar range specifier. More... | |
class | scalarRanges |
A List of scalarRange. More... | |
class | ScaledForce |
Particle force model scaled by a constant value. More... | |
class | SchillerNaumannDragForce |
Schiller-Naumann drag model for spheres. More... | |
class | scotchDecomp |
Scotch domain decomposition. When run in parallel will collect the whole graph on to the master, decompose and send back. Use ptscotchDecomp for proper distributed decomposition. More... | |
class | searchableBox |
Searching on bounding box. More... | |
class | searchableBoxFeatures |
class | searchableCylinder |
Searching on cylinder. More... | |
class | searchableDisk |
Searching on circular disk given as origin, normal (gets normalised) and radius. More... | |
class | searchableExtrudedCircle |
Searching on edgemesh with constant radius. More... | |
class | searchablePlane |
Searching on (infinite) plane. See plane.H. More... | |
class | searchablePlate |
Searching on finite plate. Plate has to be aligned with coordinate axes. Plate defined as origin and span. One of the components of span has to be 0 which defines the normal direction. E.g. More... | |
class | searchablePlateFeatures |
class | searchableSphere |
Searching on sphere. More... | |
class | searchableSurface |
Base class of (analytical or triangulated) surface. Encapsulates all the search routines. WIP. More... | |
class | searchableSurfaceCollection |
Set of transformed searchableSurfaces. Does not do boolean operations. So when meshing might find parts 'inside'. More... | |
class | searchableSurfaceControl |
class | searchableSurfaceFeatures |
Decorator that returns the features of a searchable surface. More... | |
class | searchableSurfaces |
Container for searchableSurfaces. More... | |
class | searchableSurfacesQueries |
A collection of tools for searchableSurfaces. More... | |
class | searchableSurfaceToFaceZone |
A topoSetSource to select faces based on intersection (of cell-cell vector) with a surface. More... | |
class | searchableSurfaceWithGaps |
searchableSurface using multiple slightly shifted underlying surfaces to make sure pierces don't go through gaps: More... | |
class | semiPermeableBaffleMassFractionFvPatchScalarField |
This is a mass-fraction boundary condition for a semi-permeable baffle. More... | |
class | sensibleEnthalpy |
Thermodynamics mapping class to expose the sensible enthalpy functions. More... | |
class | sensibleInternalEnergy |
Thermodynamics mapping class to expose the sensible internal energy functions. More... | |
class | septernion |
Septernion class used to perform translations and rotations in 3D space. More... | |
class | seriesProfile |
Series-up based profile data - drag and lift coefficients computed as sum of cosine series. More... | |
class | setAndNormalToFaceZone |
A topoSetSource to select faces based on usage in a faceSet, where the normal vector is used to orient the faces. More... | |
class | setSizeFieldMapper |
Field sizing mapper which sets the field size and does not map values. More... | |
class | setsToFaceZone |
A topoSetSource to select faces based on usage in a faceSet and cellSet. More... | |
class | setToCellZone |
A topoSetSource to select cells based on usage in a cellSet. More... | |
class | setToFaceZone |
A topoSetSource to select faces based on usage in a faceSet. Sets flipMap to true. More... | |
class | setToPointZone |
A topoSetSource to select points based on usage in a pointSet. More... | |
class | setUpdater |
Keeps cell/face/vertex sets uptodate. Both the ones loaded and the ones on disk. More... | |
class | setWriter |
Base class for graphics format writing. Entry points are. More... | |
class | seulex |
An extrapolation-algorithm, based on the linearly implicit Euler method with step size control and order selection. More... | |
class | SFCDLimiter |
Class with limiter function which returns the limiter for the SFCD differencing scheme based on phict obtained from the LimiterFunc class. More... | |
class | SHA1 |
Functions to compute SHA1 message digest according to the NIST specification FIPS-180-1. More... | |
class | SHA1Digest |
The SHA1 message digest. More... | |
class | sha1streambuf |
A streambuf class for calculating SHA1 digests. More... | |
class | shapeModel |
Base class for modeling shape, i.e. a physical diameter of a sizeGroup. This diameter may then be utilised for calculation of breakup, coalescence or drift rates, depending on the model implementation. More... | |
class | shapeToCell |
A topoSetSource to select cells based on cell shape. More... | |
class | SHF |
Secondary Breakup Model to take account of the different breakup regimes, bag, solutionmode, shear.... More... | |
class | shortEdgeFilter2D |
This class filters short edges generated by the CV2D mesher. More... | |
class | SIBS |
A semi-implicit mid-point solver for stiff systems of ordinary differential equations. More... | |
class | sigFpe |
Set up trapping for floating point exceptions (signal FPE). More... | |
class | sigInt |
Signal handler for INT interrupt. More... | |
class | sigQuit |
Signal handler for QUIT interrupt. More... | |
class | sigSegv |
Signal handler for SEGV interrupt. More... | |
class | sigStopAtWriteNow |
Signal handler for interrupt defined by OptimisationSwitches::stopAtWriteNowSignal. More... | |
class | sigWriteNow |
Signal handler for interrupt defined by OptimisationSwitches::writeNowSignal. More... | |
class | simpleControl |
Simple control class. Provides time-loop control methods which exit the simulation once convergence criteria have been reached. Example usage: More... | |
class | simpleFilter |
Simple top-hat filter used in dynamic LES models. More... | |
class | simpleGeomDecomp |
class | simpleMatrix |
A simple square matrix solver with scalar coefficients. More... | |
class | singleCellFvMesh |
fvMesh as subset of other mesh. Consists of one cell and all original bounday faces. Useful when manipulating boundary data. Single internal cell only needed to be able to manipulate in a standard way. More... | |
class | singleComponentMixture |
Single component mixture. More... | |
class | SingleKineticRateDevolatilisation |
Single kinetic rate devolatisation model. More... | |
class | SingleMixtureFraction |
Templated parcel multi-phase, multi-component class. More... | |
class | SinglePhaseMixture |
Templated parcel single phase, multi-component class. More... | |
class | singlePhaseTransportModel |
A simple single-phase transport model based on viscosityModel. More... | |
class | singleRegionConvergenceControl |
Single-region-specific derivation of the convergence control class. More... | |
class | singleRegionCorrectorConvergenceControl |
Single-region-specific derivation of the corrector convergence control class. More... | |
class | singleRegionSolutionControl |
Single-region-specific derivation of the solution control class. More... | |
class | sinteringModel |
Abstract base class for modeling sintering of primary particles in fractal agglomerates. More... | |
class | sixDoFRigidBodyMotion |
Six degree of freedom motion for a rigid body. More... | |
class | sixDoFRigidBodyMotionConstraint |
Base class for defining constraints for sixDoF motions. More... | |
class | sixDoFRigidBodyMotionRestraint |
Base class for defining restraints for sixDoF motions. More... | |
class | sixDoFRigidBodyMotionSolver |
6-DoF solid-body mesh motion solver for an fvMesh. More... | |
class | sixDoFRigidBodyMotionState |
Holds the motion state of sixDoF object. Wrapped up together to allow rapid scatter to other processors. The processors must all maintain exactly the same state data to avoid any drift or inconsistency. More... | |
class | sixDoFSolver |
class | skewCorrected |
Skewness-corrected interpolation scheme that applies an explicit correction to given scheme. More... | |
class | skewCorrectionVectors |
Skew-correction vectors for the skewness-corrected interpolation scheme. More... | |
class | slicedFvPatchField |
Specialisation of fvPatchField which creates the underlying fvPatchField as a slice of the given complete field. More... | |
class | slicedFvsPatchField |
Specialisation of fvsPatchField which creates the underlying fvsPatchField as a slice of the given complete field. More... | |
class | SlicedGeometricField |
Specialisation of GeometricField which holds slices of given complete fields in a form that they act as a GeometricField. More... | |
class | slidingInterface |
Sliding interface mesh modifier. Given two face zones, couple the master and slave side using a cutting procedure. More... | |
class | slipFvPatchField |
This boundary condition provides a slip constraint. More... | |
class | slipPointPatchField |
Foam::slipPointPatchField. More... | |
class | SLListBase |
Base singly-linked list. More... | |
class | SloanRenumber |
Sloan renumbering algorithm. More... | |
class | Smanip |
class | smoluchowskiJumpTFvPatchScalarField |
Smoluchowski temperature jump boundary condition. More... | |
class | smoothAlignmentSolver |
class | smoothData |
Helper class used by the fvc::smooth and fvc::spread functions. More... | |
class | smoothSolver |
Iterative solver for symmetric and asymmetric matrices which uses a run-time selected smoother e.g. GaussSeidel to converge the solution to the required tolerance. More... | |
class | SmoothSolver |
Iterative solver for symmetric and asymmetric matrices which uses a run-time selected smoother e.g. GaussSeidel to converge the solution to the required tolerance. To improve efficiency, the residual is evaluated after every nSweeps smoothing iterations. More... | |
class | snapParameters |
Simple container to keep together snap specific information. More... | |
class | snappyLayerDriver |
All to do with adding layers. More... | |
class | snappyRefineDriver |
class | snappySnapDriver |
All to do with snapping to surface. More... | |
class | solidBodyMotionDisplacementPointPatchVectorField |
Enables the specification of a fixed value boundary condition using the solid body motion functions. More... | |
class | solidBodyMotionFunction |
Base class for defining solid-body motions. More... | |
class | solidBodyMotionSolver |
Solid-body motion of the mesh specified by a run-time selectable motion function. More... | |
class | solidDisplacementThermo |
Fundamental solid thermodynamic properties. More... | |
class | solidMixtureProperties |
A mixture of solids. More... | |
class | solidNoLoopControl |
Solid no-loop control class. Implements non-orthogonal and convergence controls, but leaves loop controls to the derivation or owner. Can be derived into a "full" solid control or can be owned by a multi-region class. More... | |
class | solidParticle |
Simple solid spherical particle class with one-way coupling with the continuous phase. More... | |
class | solidParticleCloud |
A Cloud of solid particles. More... | |
class | solidProperties |
The thermophysical properties of a solid. More... | |
class | solidThermo |
Base-class for solid thermodynamic properties. More... | |
class | solution |
Selector class for relaxation factors, solver type and solution. More... | |
class | solutionControl |
Solution control class. More... | |
class | SolverPerformance |
SolverPerformance is the class returned by the LduMatrix solver containing performance statistics. More... | |
class | SortableList |
A list that is sorted upon construction or when explicitly requested with the sort() method. More... | |
class | SortableListDRGEP |
A list that is sorted upon construction or when explicitly requested with the sort() method. More... | |
class | SortableListEFA |
A list that is sorted upon construction or when explicitly requested with the sort() method. More... | |
class | sortLabelledTri |
Helper class which when constructed with a triSurface sorts the faces according to region number (or rather constructs a mapping). More... | |
class | SpatialTensor |
Templated 3D spatial tensor derived from MatrixSpace used to represent transformations of spatial vectors and the angular and linear inertia of rigid bodies. More... | |
class | spatialTransform |
Compact representation of the Plücker spatial transformation tensor in terms of the rotation tensor E and translation vector r . More... | |
class | SpatialVector |
Templated 3D spatial vector derived from VectorSpace used to represent the anglular and linear components of position, velocity and acceleration of rigid bodies. More... | |
class | specie |
Base class of the thermophysical property types. More... | |
class | specieCoeffs |
Class to hold the specie index and its coefficients in the reaction rate expression. More... | |
class | specieElement |
class | SpecieMixture |
Foam::SpecieMixture. More... | |
class | specieTransferMassFractionFvPatchScalarField |
Abstract base class for specie-transferring mass fraction boundary conditions. More... | |
class | specieTransferTemperatureFvPatchScalarField |
This is a temperature boundary condition for a specie-transferring wall. More... | |
class | specieTransferVelocityFvPatchVectorField |
This is a velocity boundary condition for a specie-transferring wall. More... | |
class | SpecularReflection |
Reversing the wall-normal component of the particle velocity. More... | |
class | SphereDragForce |
Drag model for spheres. More... | |
class | sphereToCell |
A topoSetSource to select cells based on cell centres inside sphere. More... | |
class | SphericalTensor |
Templated 3D SphericalTensor derived from VectorSpace adding construction from 1 component, element access using th ii() member function and the inner-product (dot-product) and outer-product operators. More... | |
class | SphericalTensor2D |
Templated 2D sphericalTensor derived from VectorSpace adding construction from 1 component, element access using ii() member function and the inner-product (dot-product) and outer-product operators. More... | |
class | splineInterpolationWeights |
Catmull-Rom spline interpolation. More... | |
class | splitCell |
Description of cell after splitting. Contains cellLabel and pointers to cells it it split in. See directedRefinement. More... | |
class | sprayCloud |
Cloud class to introduce reacting spray parcels. More... | |
class | SprayCloud |
Templated base class for spray cloud. More... | |
class | sprayParcel |
Definition of spray parcel. More... | |
class | SprayParcel |
Reaching spray parcel, with added functionality for atomisation and breakup. More... | |
class | springRenumber |
Use spring analogy - attract neighbouring cells according to the distance of their cell indices. More... | |
class | SquareMatrix |
A templated 2D square matrix of objects of <T>, where the n x n matrix dimension is known and used for subscript bounds checking, etc. More... | |
class | SRFForce |
Calculates particle SRF reference frame force. More... | |
class | SRFFreestreamVelocityFvPatchVectorField |
Freestream velocity condition to be used in conjunction with the single rotating frame (SRF) model (see: SRFModel class) More... | |
class | SRFVelocityFvPatchVectorField |
Velocity condition to be used in conjunction with the single rotating frame (SRF) model (see: SRFModel class) More... | |
class | SRFWallVelocityFvPatchVectorField |
Wall-velocity condition to be used in conjunction with the single rotating frame (SRF) model (see: FOAM::SRFModel) More... | |
class | SRIFallOffFunction |
The SRI fall-off function. More... | |
class | stabiliseOp |
class | stabiliseOp2 |
class | stabiliseOp3 |
class | standardChemistryModel |
Extends base chemistry model by adding a thermo package, and ODE functions. Introduces chemistry equation system and evaluation of chemical source terms. More... | |
class | StandardWallInteraction |
Wall interaction model. More... | |
class | STARCDCoordinateRotation |
A coordinateRotation defined by the STAR-CD convention. More... | |
class | starcdSurfaceWriter |
A surfaceWriter for STARCD files. More... | |
class | starMesh |
A messy mesh class which supports the possibility of creating a shapeMesh for regular Star meshes (no arbitrary interfaces or collapsed SAMM cells). If any of these special features exist, the mesh is created as polyMesh. More... | |
class | staticEngineMesh |
Foam::staticEngineMesh. More... | |
class | staticFvMesh |
Foam::staticFvMesh. More... | |
class | StationaryPhaseModel |
Class which represents a stationary (and therefore probably solid) phase. Generates, but does not store, zero velocity and flux field and turbulent quantities. Throws an error when non-const access is requested to the motion fields or when the momentum equation is requested. Usage must must protect against such calls. More... | |
class | STLpoint |
A vertex point representation for STL files. More... | |
class | STLtriangle |
A triangle representation for STL files. More... | |
class | StochasticCollisionModel |
Templated stochastic collision model class. More... | |
class | StochasticDispersionRAS |
The velocity is perturbed in random direction, with a Gaussian random number distribution with variance sigma. where sigma is defined below. More... | |