kinematicSingleLayer Class Reference

Inheritance diagram for kinematicSingleLayer:

Collaboration diagram for kinematicSingleLayer:

Public Member Functions
	TypeName ("kinematicSingleLayer")
	Runtime type information. More...
	kinematicSingleLayer (const word &modelType, const fvMesh &mesh, const dimensionedVector &g, const word &regionType, const bool readFields=true)
	Construct from components. More...
virtual	~kinematicSingleLayer ()
	Destructor. More...
virtual scalar	CourantNumber () const
	Courant number evaluation. More...
const Switch &	momentumPredictor () const
	Return the momentum predictor. More...
label	nOuterCorr () const
	Return the number of outer correctors. More...
label	nCorr () const
	Return the number of PISO correctors. More...
label	nNonOrthCorr () const
	Return the number of non-orthogonal correctors. More...
const dimensionedScalar &	deltaSmall () const
	Return small delta. More...
const volScalarField &	mu () const
	Return const access to the dynamic viscosity [Pa.s]. More...
const volScalarField &	sigma () const
	Return const access to the surface tension [kg/s2]. More...
const volScalarField &	delta () const
	Return const access to the film thickness [m]. More...
const volScalarField &	alpha () const
	Return the film coverage, 1 = covered, 0 = uncovered []. More...
virtual const volVectorField &	U () const
	Return the film velocity [m/s]. More...
virtual const volVectorField &	Us () const
	Return the film surface velocity [m/s]. More...
virtual const volVectorField &	Uw () const
	Return the film wall velocity [m/s]. More...
virtual const volScalarField &	deltaRho () const
	Return the film thickness*density (helper field) [kg/m3]. More...
virtual const surfaceScalarField &	phi () const
	Return the film flux [kg.m/s]. More...
virtual const volScalarField &	rho () const
	Return the film density [kg/m3]. More...
virtual const volScalarField &	T () const
	Return the film mean temperature [K]. More...
virtual const volScalarField &	Ts () const
	Return the film surface temperature [K]. More...
virtual const volScalarField &	Tw () const
	Return the film wall temperature [K]. More...
virtual const volScalarField &	hs () const
	Return the film surface enthalpy [J/kg]. More...
virtual const volScalarField &	Cp () const
	Return the film specific heat capacity [J/kg/K]. More...
virtual const volScalarField &	kappa () const
	Return the film thermal conductivity [W/m/K]. More...
virtual tmp< volScalarField >	primaryMassTrans () const
	Return mass transfer source - Eulerian phase only. More...
virtual const volScalarField &	cloudMassTrans () const
	Return the film mass available for transfer to cloud. More...
virtual const volScalarField &	cloudDiameterTrans () const
	Return the parcel diameters originating from film to cloud. More...
virtual void	addSources (const label patchi, const label facei, const scalar massSource, const vector &momentumSource, const scalar pressureSource, const scalar energySource=0)
	External hook to add sources to the film. More...
volVectorField &	USpPrimary ()
	Momementum [kg/m/s2]. More...
volScalarField &	pSpPrimary ()
	Pressure [Pa]. More...
volScalarField &	rhoSpPrimary ()
	Mass [kg/m2/s]. More...
volVectorField &	USp ()
	Momentum [kg/m/s2]. More...
volScalarField &	pSp ()
	Pressure [Pa]. More...
volScalarField &	rhoSp ()
	Mass [kg/m2/s]. More...
const volVectorField &	USp () const
	Momentum [kg/m/s2]. More...
const volScalarField &	pSp () const
	Pressure [Pa]. More...
const volScalarField &	rhoSp () const
	Mass [kg/m2/s]. More...
const volVectorField &	UPrimary () const
	Velocity [m/s]. More...
const volScalarField &	pPrimary () const
	Pressure [Pa]. More...
const volScalarField &	rhoPrimary () const
	Density [kg/m3]. More...
const volScalarField &	muPrimary () const
	Viscosity [Pa.s]. More...
const filmThermoModel &	filmThermo () const
	Film thermo. More...
injectionModelList &	injection ()
	Injection. More...
transferModelList &	transfer ()
	Transfer. More...
const filmTurbulenceModel &	turbulence () const
	Turbulence. More...
tmp< volScalarField >	mass () const
	Return the current film mass. More...
tmp< volScalarField >	netMass () const
	Return the net film mass available over the next integration. More...
tmp< volScalarField >	deltaMass () const
	Return the change in film mass due to sources/sinks. More...
tmp< volScalarField >	gNorm () const
	Return the gravity normal-to-patch component contribution. More...
tmp< volScalarField >	gNormClipped () const
	Return the gravity normal-to-patch component contribution. More...
tmp< volVectorField >	gTan () const
	Return the gravity tangential component contributions. More...
virtual void	preEvolveRegion ()
	Pre-evolve film hook. More...
virtual void	evolveRegion ()
	Evolve the film equations. More...
virtual tmp< volScalarField::Internal >	Srho () const
	Return total mass source - Eulerian phase only. More...
virtual tmp< volScalarField::Internal >	Srho (const label i) const
	Return mass source for specie i - Eulerian phase only. More...
virtual tmp< volScalarField::Internal >	Sh () const
	Return enthalpy source - Eulerian phase only. More...
virtual void	info ()
	Provide some feedback. More...
Public Member Functions inherited from surfaceFilmModel
	TypeName ("surfaceFilmModel")
	Runtime type information. More...
	declareRunTimeSelectionTable (autoPtr, surfaceFilmModel, mesh,(const word &modelType, const fvMesh &mesh, const dimensionedVector &g, const word &regionType),(modelType, mesh, g, regionType))
	surfaceFilmModel (const word &modelType, const fvMesh &mesh, const dimensionedVector &g, const word &regionType)
	Construct from type name, mesh and gravity vector. More...
virtual	~surfaceFilmModel ()
	Destructor. More...
const dimensionedVector &	g () const
	Return the accleration due to gravity. More...
Public Member Functions inherited from singleLayerRegion
	TypeName ("regionModel")
	Runtime type information. More...
	singleLayerRegion (const fvMesh &mesh, const word &regionType)
	Construct null. More...
	singleLayerRegion (const fvMesh &mesh, const word &regionType, const word &modelName, bool readFields=true)
	Construct from mesh, region type and name. More...
virtual	~singleLayerRegion ()
	Destructor. More...
virtual const volVectorField &	nHat () const
	Return the patch normal vectors. More...
virtual const volScalarField &	magSf () const
	Return the face area magnitudes / [m2]. More...
virtual const labelList &	passivePatchIDs () const
	Return the list of patch IDs opposite to internally. More...
template<class Type >
wordList	mappedFieldAndInternalPatchTypes () const
	Return boundary types for mapped field patches. More...
template<class Type >
wordList	mappedPushedFieldPatchTypes () const
	Return boundary types for pushed mapped field patches. More...
template<class Type >
Foam::wordList	mappedFieldAndInternalPatchTypes () const
template<class Type >
Foam::wordList	mappedPushedFieldPatchTypes () const
Public Member Functions inherited from regionModel
	TypeName ("regionModel")
	Runtime type information. More...
	regionModel (const fvMesh &mesh, const word &regionType)
	Construct null. More...
	regionModel (const fvMesh &mesh, const word &regionType, const word &modelName, bool readFields=true)
	Construct from mesh, region type and name. More...
	regionModel (const fvMesh &mesh, const word &regionType, const word &modelName, const dictionary &dict, bool readFields=true)
	Construct from mesh and name and dict. More...
virtual	~regionModel ()
	Destructor. More...
const fvMesh &	primaryMesh () const
	Return the reference to the primary mesh database. More...
const Time &	time () const
	Return the reference to the time database. More...
const Switch &	active () const
	Return the active flag. More...
const Switch &	infoOutput () const
	Return the information flag. More...
const word &	modelName () const
	Return the model name. More...
const fvMesh &	regionMesh () const
	Return the region mesh database. More...
fvMesh &	regionMesh ()
	Return the region mesh database for manipulation. More...
const dictionary &	coeffs () const
	Return the model coefficients dictionary. More...
const dictionary &	solution () const
	Return the solution dictionary. More...
const IOdictionary &	outputProperties () const
	Return const access to the output properties dictionary. More...
IOdictionary &	outputProperties ()
	Return output properties dictionary. More...
bool	isCoupledPatch (const label regionPatchi) const
	Return true if patchi on the local region is a coupled. More...
bool	isRegionPatch (const label primaryPatchi) const
	Return true if patchi on the primary region is a coupled. More...
const labelList &	primaryPatchIDs () const
	Return the list of patch IDs on the primary region coupled. More...
const labelList &	intCoupledPatchIDs () const
	Return the list of patch IDs internally coupled with the. More...
label	regionPatchID (const label primaryPatchID) const
	Return region ID corresponding to primaryPatchID. More...
label	nbrCoupledPatchID (const regionModel &nbrRegion, const label regionPatchi) const
	Return the coupled patch ID paired with coupled patch. More...
template<class Type >
tmp< Foam::Field< Type > >	mapRegionPatchField (const regionModel &nbrRegion, const label regionPatchi, const label nbrPatchi, const Field< Type > &nbrField, const bool flip=false) const
	Map patch field from another region model to local patch. More...
template<class Type >
tmp< Field< Type > >	mapRegionPatchField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip=false) const
	Map patch field from another region model to local patch. More...
template<class Type >
tmp< Field< Type > >	mapRegionPatchInternalField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip=false) const
	Map patch internal field from another region model to local. More...
template<class Type >
void	toPrimary (const label regionPatchi, List< Type > &regionField) const
	Convert a local region field to the primary region. More...
template<class Type >
void	toRegion (const label regionPatchi, List< Type > &primaryFieldField) const
	Convert a primary region field to the local region. More...
template<class Type , class CombineOp >
void	toPrimary (const label regionPatchi, List< Type > &regionField, const CombineOp &cop) const
	Convert a local region field to the primary region with op. More...
template<class Type , class CombineOp >
void	toRegion (const label regionPatchi, List< Type > &primaryFieldField, const CombineOp &cop) const
	Convert a primary region field to the local region with op. More...
virtual void	evolve ()
	Main driver routing to evolve the region - calls other evolves. More...
virtual void	postEvolveRegion ()
	Post-evolve region. More...
template<class Type >
Foam::tmp< Foam::Field< Type > >	mapRegionPatchField (const regionModel &nbrRegion, const label regionPatchi, const label nbrPatchi, const Field< Type > &nbrField, const bool flip) const
template<class Type >
Foam::tmp< Foam::Field< Type > >	mapRegionPatchField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip) const
template<class Type >
Foam::tmp< Foam::Field< Type > >	mapRegionPatchInternalField (const regionModel &nbrRegion, const word &fieldName, const label regionPatchi, const bool flip) const
Public Member Functions inherited from IOdictionary
	IOdictionary (const IOobject &)
	Construct given an IOobject. More...
	IOdictionary (const IOobject &, const dictionary &)
	Construct given an IOobject and dictionary. More...
	IOdictionary (const IOobject &, Istream &)
	Construct given an IOobject and Istream. More...
virtual	~IOdictionary ()
	Destructor. More...
virtual bool	global () const
	Is object global. More...
virtual fileName	filePath () const
	Return complete path + object name if the file exists. More...
Public Member Functions inherited from baseIOdictionary
	TypeName ("dictionary")
	baseIOdictionary (const IOobject &)
	Construct given an IOobject. More...
	baseIOdictionary (const IOobject &, const dictionary &)
	Construct given an IOobject and dictionary. More...
	baseIOdictionary (const IOobject &, Istream &)
	Construct given an IOobject and Istream. More...
virtual	~baseIOdictionary ()
	Destructor. More...
const word &	name () const
	Name function is needed to disambiguate those inherited. More...
virtual bool	readData (Istream &)
	ReadData function required for regIOobject read operation. More...
virtual bool	writeData (Ostream &) const
	WriteData function required for regIOobject write operation. More...
void	operator= (const baseIOdictionary &)
	Assignment of other baseIOdictionary's entries to this. More...
Public Member Functions inherited from regIOobject
	TypeName ("regIOobject")
	Runtime type information. More...
	regIOobject (const IOobject &, const bool isTime=false)
	Construct from IOobject. Optional flag for if IOobject is the. More...
	regIOobject (const regIOobject &)
	Construct as copy. More...
	regIOobject (const regIOobject &, bool registerCopy)
	Construct as copy, transferring registry registration to copy. More...
	regIOobject (const word &newName, const regIOobject &, bool registerCopy)
	Construct as copy with new name, transfering registry registration. More...
	regIOobject (const IOobject &, const regIOobject &)
	Construct as copy with new IO parameters. More...
virtual	~regIOobject ()
	Destructor. More...
bool	checkIn ()
	Add object to registry. More...
bool	checkOut ()
	Remove object from registry. More...
virtual void	addWatch ()
	Add file watch on object (if registered and READ_IF_MODIFIED) More...
bool	ownedByRegistry () const
	Is this object owned by the registry? More...
void	store ()
	Transfer ownership of this object to its registry. More...
void	release ()
	Release ownership of this object from its registry. More...
label	eventNo () const
	Event number at last update. More...
label &	eventNo ()
	Event number at last update. More...
bool	upToDate (const regIOobject &) const
	Return true if up-to-date with respect to given object. More...
bool	upToDate (const regIOobject &, const regIOobject &) const
	Return true if up-to-date with respect to given objects. More...
bool	upToDate (const regIOobject &, const regIOobject &, const regIOobject &) const
	Return true if up-to-date with respect to given objects. More...
bool	upToDate (const regIOobject &, const regIOobject &, const regIOobject &, const regIOobject &) const
	Return true if up-to-date with respect to given objects. More...
void	setUpToDate ()
	Set up to date (obviously) More...
virtual void	rename (const word &newName)
	Rename. More...
bool	headerOk ()
	Read and check header info. More...
Istream &	readStream (const word &, const bool valid=true)
	Return Istream and check object type against that given. More...
void	close ()
	Close Istream. More...
virtual label	addWatch (const fileName &)
	Add file watch for fileName on object if not yet watched. Return. More...
const labelList &	watchIndices () const
	Return file-monitoring handles. More...
labelList &	watchIndices ()
	Return file-monitoring handles. More...
virtual bool	modified () const
	Return true if the object's file (or files for objectRegistry) More...
virtual bool	readIfModified ()
	Read object if modified (as set by call to modified) More...
virtual bool	writeObject (IOstream::streamFormat, IOstream::versionNumber, IOstream::compressionType, const bool valid) const
	Write using given format, version and compression. More...
virtual bool	write (const bool valid=true) const
	Write using setting from DB. More...
void	operator= (const IOobject &)
Public Member Functions inherited from IOobject
	TypeName ("IOobject")
	Runtime type information. More...
	IOobject (const word &name, const fileName &instance, const objectRegistry &registry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true)
	Construct from name, instance, registry, io options. More...
	IOobject (const word &name, const fileName &instance, const fileName &local, const objectRegistry &registry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false)
	Construct from name, instance, local, registry, io options. More...
	IOobject (const fileName &path, const objectRegistry &registry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true, bool globalObject=false)
	Construct from path, registry, io options. More...
	IOobject (const IOobject &io, const objectRegistry &registry)
	Construct from copy resetting registry. More...
	IOobject (const IOobject &io, const word &name)
	Construct from copy resetting name. More...
autoPtr< IOobject >	clone () const
	Clone. More...
autoPtr< IOobject >	clone (const objectRegistry &registry) const
	Clone resetting registry. More...
virtual	~IOobject ()
	Destructor. More...
const Time &	time () const
	Return time. More...
const objectRegistry &	db () const
	Return the local objectRegistry. More...
const word &	name () const
	Return name. More...
const word &	headerClassName () const
	Return name of the class name read from header. More...
word &	headerClassName ()
	Return name of the class name read from header. More...
string &	note ()
	Return non-constant access to the optional note. More...
const string &	note () const
	Return the optional note. More...
bool &	registerObject ()
	Register object created from this IOobject with registry if true. More...
bool	registerObject () const
	Register object created from this IOobject with registry if true. More...
bool &	globalObject ()
	Is object same for all processors. More...
bool	globalObject () const
	Is object same for all processors. More...
readOption	readOpt () const
readOption &	readOpt ()
writeOption	writeOpt () const
writeOption &	writeOpt ()
word	group () const
	Return group (extension part of name) More...
word	member () const
	Return member (name without the extension) More...
const fileName &	rootPath () const
const fileName &	caseName () const
const fileName &	instance () const
fileName &	instance ()
const fileName &	local () const
fileName	path () const
	Return complete path. More...
fileName	path (const word &instance, const fileName &local="") const
	Return complete path with alternative instance and local. More...
fileName	objectPath () const
	Return complete path + object name. More...
fileName	localFilePath (const word &typeName) const
	Helper for filePath that searches locally. More...
fileName	globalFilePath (const word &typeName) const
	Helper for filePath that searches up if in parallel. More...
bool	readHeader (Istream &)
	Read header. More...
template<class Type >
bool	typeHeaderOk (const bool checkType=true)
	Read header (uses typeFilePath to find file) and check header. More...
template<class Type >
void	warnNoRereading () const
	Helper: warn that type does not support re-reading. More...
bool	writeHeader (Ostream &) const
	Write header. More...
bool	writeHeader (Ostream &, const word &objectType) const
	Write header. Allow override of type. More...
bool	good () const
bool	bad () const
InfoProxy< IOobject >	info () const
	Return info proxy. More...
void	operator= (const IOobject &)
template<class Name >
Foam::word	groupName (Name name, const word &group)
Public Member Functions inherited from dictionary
	ClassName ("dictionary")
	dictionary ()
	Construct top-level dictionary null. More...
	dictionary (const fileName &name)
	Construct top-level empty dictionary with given name. More...
	dictionary (const fileName &name, const dictionary &parentDict, Istream &)
	Construct given the entry name, parent dictionary and Istream,. More...
	dictionary (Istream &)
	Construct top-level dictionary from Istream,. More...
	dictionary (Istream &, const bool keepHeader)
	Construct top-level dictionary from Istream,. More...
	dictionary (const dictionary &parentDict, const dictionary &)
	Construct as copy given the parent dictionary. More...
	dictionary (const dictionary &)
	Construct top-level dictionary as copy. More...
	dictionary (const dictionary *)
	Construct top-level dictionary as copy from pointer to dictionary. More...
	dictionary (const dictionary &parentDict, const Xfer< dictionary > &)
	Construct by transferring parameter contents given parent dictionary. More...
	dictionary (const Xfer< dictionary > &)
	Construct top-level dictionary by transferring parameter contents. More...
autoPtr< dictionary >	clone () const
	Construct and return clone. More...
virtual	~dictionary ()
	Destructor. More...
const dictionary &	parent () const
	Return the parent dictionary. More...
const dictionary &	topDict () const
	Return the top of the tree. More...
label	startLineNumber () const
	Return line number of first token in dictionary. More...
label	endLineNumber () const
	Return line number of last token in dictionary. More...
SHA1Digest	digest () const
	Return the SHA1 digest of the dictionary contents. More...
tokenList	tokens () const
	Return the dictionary as a list of tokens. More...
bool	found (const word &, bool recursive=false, bool patternMatch=true) const
	Search dictionary for given keyword. More...
const entry *	lookupEntryPtr (const word &, bool recursive, bool patternMatch) const
	Find and return an entry data stream pointer if present. More...
entry *	lookupEntryPtr (const word &, bool recursive, bool patternMatch)
	Find and return an entry data stream pointer for manipulation. More...
const entry &	lookupEntry (const word &, bool recursive, bool patternMatch) const
	Find and return an entry data stream if present otherwise error. More...
ITstream &	lookup (const word &, bool recursive=false, bool patternMatch=true) const
	Find and return an entry data stream. More...
template<class T >
T	lookupType (const word &, bool recursive=false, bool patternMatch=true) const
	Find and return a T,. More...
template<class T >
T	lookupOrDefault (const word &, const T &, bool recursive=false, bool patternMatch=true) const
	Find and return a T,. More...
template<class T >
T	lookupOrAddDefault (const word &, const T &, bool recursive=false, bool patternMatch=true)
	Find and return a T, if not found return the given. More...
template<class T >
bool	readIfPresent (const word &, T &, bool recursive=false, bool patternMatch=true) const
	Find an entry if present, and assign to T. More...
const entry *	lookupScopedEntryPtr (const word &, bool recursive, bool patternMatch) const
	Find and return an entry data stream pointer if present. More...
bool	isDict (const word &) const
	Check if entry is a sub-dictionary. More...
const dictionary *	subDictPtr (const word &) const
	Find and return a sub-dictionary pointer if present. More...
dictionary *	subDictPtr (const word &)
	Find and return a sub-dictionary pointer if present. More...
const dictionary &	subDict (const word &) const
	Find and return a sub-dictionary. More...
dictionary &	subDict (const word &)
	Find and return a sub-dictionary for manipulation. More...
dictionary	subOrEmptyDict (const word &, const bool mustRead=false) const
	Find and return a sub-dictionary as a copy, or. More...
const dictionary &	optionalSubDict (const word &) const
	Find and return a sub-dictionary if found. More...
wordList	toc () const
	Return the table of contents. More...
wordList	sortedToc () const
	Return the sorted table of contents. More...
List< keyType >	keys (bool patterns=false) const
	Return the list of available keys or patterns. More...
bool	substituteKeyword (const word &keyword)
	Substitute the given keyword prepended by '$' with the. More...
bool	substituteScopedKeyword (const word &keyword)
	Substitute the given scoped keyword prepended by '$' with the. More...
bool	add (entry *, bool mergeEntry=false)
	Add a new entry. More...
void	add (const entry &, bool mergeEntry=false)
	Add an entry. More...
void	add (const keyType &, const word &, bool overwrite=false)
	Add a word entry. More...
void	add (const keyType &, const string &, bool overwrite=false)
	Add a string entry. More...
void	add (const keyType &, const label, bool overwrite=false)
	Add a label entry. More...
void	add (const keyType &, const scalar, bool overwrite=false)
	Add a scalar entry. More...
void	add (const keyType &, const dictionary &, bool mergeEntry=false)
	Add a dictionary entry. More...
template<class T >
void	add (const keyType &, const T &, bool overwrite=false)
	Add a T entry. More...
void	set (entry *)
	Assign a new entry, overwrite any existing entry. More...
void	set (const entry &)
	Assign a new entry, overwrite any existing entry. More...
void	set (const keyType &, const dictionary &)
	Assign a dictionary entry, overwrite any existing entry. More...
template<class T >
void	set (const keyType &, const T &)
	Assign a T entry, overwrite any existing entry. More...
bool	remove (const word &)
	Remove an entry specified by keyword. More...
bool	changeKeyword (const keyType &oldKeyword, const keyType &newKeyword, bool forceOverwrite=false)
	Change the keyword for an entry,. More...
bool	merge (const dictionary &)
	Merge entries from the given dictionary. More...
void	clear ()
	Clear the dictionary. More...
void	transfer (dictionary &)
	Transfer the contents of the argument and annul the argument. More...
Xfer< dictionary >	xfer ()
	Transfer contents to the Xfer container. More...
bool	read (Istream &)
	Read dictionary from Istream. More...
bool	read (Istream &, const bool keepHeader)
	Read dictionary from Istream, optionally keeping the header. More...
void	write (Ostream &, const bool subDict=true) const
	Write dictionary, normally with sub-dictionary formatting. More...
ITstream &	operator[] (const word &) const
	Find and return entry. More...
void	operator= (const dictionary &)
void	operator+= (const dictionary &)
	Include entries from the given dictionary. More...
void	operator|= (const dictionary &)
	Conditionally include entries from the given dictionary. More...
void	operator<<= (const dictionary &)
	Unconditionally include entries from the given dictionary. More...
Public Member Functions inherited from dictionaryName
	dictionaryName ()
	Construct dictionaryName null. More...
	dictionaryName (const fileName &name)
	Construct dictionaryName as copy of the given fileName. More...
const fileName &	name () const
	Return the dictionary name. More...
fileName &	name ()
	Return the dictionary name. More...
const word	dictName () const
	Return the local dictionary name (final part of scoped name) More...
Public Member Functions inherited from ILList< LListBase, T >
	ILList ()
	Null construct. More...
	ILList (T *a)
	Construct given initial T. More...
	ILList (Istream &)
	Construct from Istream. More...
	ILList (const ILList< LListBase, T > &)
	Construct as copy. More...
template<class CloneArg >
	ILList (const ILList< LListBase, T > &lst, const CloneArg &cloneArg)
	Copy constructor with additional argument for clone. More...
template<class INew >
	ILList (Istream &, const INew &)
	Construct from Istream using given Istream constructor class. More...
	~ILList ()
	Destructor. More...
bool	eraseHead ()
	Remove the head element specified from the list and delete it. More...
bool	erase (T *p)
	Remove the specified element from the list and delete it. More...
void	clear ()
	Clear the contents of the list. More...
void	transfer (ILList< LListBase, T > &)
	Transfer the contents of the argument into this List. More...
void	operator= (const ILList< LListBase, T > &)
	Assignment operator. More...
Public Member Functions inherited from UILList< LListBase, T >
	UILList ()
	Null construct. More...
	UILList (T *a)
	Construct given initial T. More...
	UILList (const UILList< LListBase, T > &)
	Construct as copy. More...
T *	first ()
	Return the first entry. More...
const T *	first () const
	Return the first entry. More...
T *	last ()
	Return the last entry. More...
const T *	last () const
	Return the last entry. More...
T *	removeHead ()
	Remove and return head. More...
T *	remove (T *p)
	Remove and return element. More...
T *	remove (iterator &it)
	Remove and return specified by iterator. More...
void	operator= (const UILList< LListBase, T > &)
iterator	begin ()
const iterator &	end ()
const_iterator	cbegin () const
const const_iterator &	cend () const
const_iterator	begin () const
const const_iterator &	end () const
const_reverse_iterator	crbegin () const
const const_reverse_iterator &	crend () const
const_reverse_iterator	rbegin () const
const const_reverse_iterator &	rend () const
bool	operator== (const UILList< LListBase, T > &) const
	Equality operation on ULists of the same type. More...
bool	operator!= (const UILList< LListBase, T > &) const
	The opposite of the equality operation. Takes linear time. More...

Protected Member Functions
virtual bool	read ()
	Read control parameters from dictionary. More...
virtual void	correctThermoFields ()
	Correct the thermo fields. More...
virtual void	resetPrimaryRegionSourceTerms ()
	Reset source term fields. More...
virtual void	transferPrimaryRegionThermoFields ()
	Transfer thermo fields from the primary region to the film region. More...
virtual void	transferPrimaryRegionSourceFields ()
	Transfer source fields from the primary region to the film region. More...
virtual tmp< volScalarField >	pu ()
	Explicit pressure source contribution. More...
virtual tmp< volScalarField >	pp ()
	Implicit pressure source coefficient. More...
virtual void	correctAlpha ()
	Correct film coverage field. More...
virtual void	updateSubmodels ()
	Update the film sub-models. More...
virtual void	continuityCheck ()
	Continuity check. More...
virtual void	updateSurfaceVelocities ()
	Update film surface velocities. More...
template<class Type >
void	constrainFilmField (Type &field, const typename Type::cmptType &value)
	Constrain a film region master/slave boundaries of a field to a. More...
virtual void	solveContinuity ()
	Solve continuity equation. More...
virtual tmp< fvVectorMatrix >	solveMomentum (const volScalarField &pu, const volScalarField &pp)
	Solve for film velocity. More...
virtual void	solveThickness (const volScalarField &pu, const volScalarField &pp, const fvVectorMatrix &UEqn)
	Solve coupled velocity-thickness equations. More...
Protected Member Functions inherited from regionModel
virtual bool	read (const dictionary &dict)
	Read control parameters from dictionary. More...
virtual const AMIPatchToPatchInterpolation &	interRegionAMI (const regionModel &nbrRegion, const label regionPatchi, const label nbrPatchi, const bool flip) const
	Create or return a new inter-region AMI object. More...
Protected Member Functions inherited from regIOobject
bool	readHeaderOk (const IOstream::streamFormat PstreamFormat, const word &typeName)
	Helper: check readOpt flags and read if necessary. More...
Protected Member Functions inherited from IOobject
void	setBad (const string &)
	Set the object state to bad. More...

Protected Attributes
Switch	momentumPredictor_
	Momentum predictor. More...
label	nOuterCorr_
	Number of outer correctors. More...
label	nCorr_
	Number of PISO-like correctors. More...
label	nNonOrthCorr_
	Number of non-orthogonal correctors. More...
scalar	cumulativeContErr_
	Cumulative continuity error. More...
const dimensionedScalar	deltaSmall_
	Small delta. More...
scalar	deltaCoLimit_
	Film thickness above which Courant number calculation in valid. More...
volScalarField	rho_
	Density [kg/m3]. More...
volScalarField	mu_
	Dynamic viscosity [Pa.s]. More...
volScalarField	sigma_
	Surface tension [m/s2]. More...
volScalarField	delta_
	Film thickness [m]. More...
volScalarField	alpha_
	Film coverage indicator, 1 = covered, 0 = uncovered []. More...
volVectorField	U_
	Velocity - mean [m/s]. More...
volVectorField	Us_
	Velocity - surface [m/s]. More...
volVectorField	Uw_
	Velocity - wall [m/s]. More...
volScalarField	deltaRho_
	Film thickness*density (helper field) [kg/m2]. More...
surfaceScalarField	phi_
	Mass flux (includes film thickness) [kg.m/s]. More...
volScalarField	primaryMassTrans_
	Film mass available for transfer to the primary region. More...
volScalarField	cloudMassTrans_
	Film mass available for transfer to cloud. More...
volScalarField	cloudDiameterTrans_
	Parcel diameters originating from film to cloud. More...
volVectorField	USp_
	Momementum [kg/m/s2]. More...
volScalarField	pSp_
	Pressure [Pa]. More...
volScalarField	rhoSp_
	Mass [kg/m2/s]. More...
volVectorField	USpPrimary_
	Momementum [kg/m/s2]. More...
volScalarField	pSpPrimary_
	Pressure [Pa]. More...
volScalarField	rhoSpPrimary_
	Mass [kg/m2/s]. More...
volVectorField	UPrimary_
	Velocity [m/s]. More...
volScalarField	pPrimary_
	Pressure [Pa]. More...
volScalarField	rhoPrimary_
	Density [kg/m3]. More...
volScalarField	muPrimary_
	Viscosity [Pa.s]. More...
autoPtr< filmThermoModel >	filmThermo_
	Film thermo model. More...
scalarField	availableMass_
	Available mass for transfer via sub-models. More...
injectionModelList	injection_
	Cloud injection. More...
transferModelList	transfer_
	Transfer with the continuous phase. More...
autoPtr< filmTurbulenceModel >	turbulence_
	Turbulence model. More...
forceList	forces_
	List of film forces. More...
scalar	addedMassTotal_
	Cumulative mass added via sources [kg]. More...
Protected Attributes inherited from surfaceFilmModel
const dimensionedVector &	g_
	Acceleration due to gravity [m/s2]. More...
Protected Attributes inherited from singleLayerRegion
autoPtr< volVectorField >	nHatPtr_
	Patch normal vectors. More...
autoPtr< volScalarField >	magSfPtr_
	Face area magnitudes / [m2]. More...
labelList	passivePatchIDs_
	List of patch IDs opposite to internally coupled patches. More...
Protected Attributes inherited from regionModel
const fvMesh &	primaryMesh_
	Reference to the primary mesh database. More...
const Time &	time_
	Reference to the time database. More...
Switch	active_
	Active flag. More...
Switch	infoOutput_
	Active information output. More...
const word	modelName_
	Model name. More...
autoPtr< fvMesh >	regionMeshPtr_
	Pointer to the region mesh database. More...
dictionary	coeffs_
	Model coefficients dictionary. More...
autoPtr< IOdictionary >	outputPropertiesPtr_
	Dictionary of output properties. More...
labelList	primaryPatchIDs_
	List of patch IDs on the primary region coupled to this region. More...
labelList	intCoupledPatchIDs_
	List of patch IDs internally coupled with the primary region. More...
word	regionName_
	Region name. More...
regionModelFunctionObjectList	functions_
	Region model function objects. More...
wordList	interRegionAMINames_
	List of region names this region is coupled to. More...
PtrList< PtrList< AMIPatchToPatchInterpolation > >	interRegionAMI_
	List of AMI objects per coupled region. More...

Additional Inherited Members
Public Types inherited from IOobject
enum	objectState { GOOD, BAD }
	Enumeration defining the valid states of an IOobject. More...
enum	readOption { MUST_READ, MUST_READ_IF_MODIFIED, READ_IF_PRESENT, NO_READ }
	Enumeration defining the read options. More...
enum	writeOption { AUTO_WRITE = 0, NO_WRITE = 1 }
	Enumeration defining the write options. More...
enum	fileCheckTypes { timeStamp, timeStampMaster, inotify, inotifyMaster }
	Enumeration defining the file checking options. More...
Public Types inherited from UILList< LListBase, T >
typedef T	value_type
	Type of values the DLList contains. More...
typedef T &	reference
	Type that can be used for storing into DLList::value_type. More...
typedef const T &	const_reference
	Type that can be used for storing into constant. More...
typedef label	size_type
	The type that can represent the size of a DLList. More...
typedef LListBase::iterator	LListBase_iterator
typedef LListBase::const_iterator	LListBase_const_iterator
Static Public Member Functions inherited from surfaceFilmModel
static autoPtr< surfaceFilmModel >	New (const fvMesh &mesh, const dimensionedVector &g, const word &regionType="surfaceFilm")
	Return a reference to the selected surface film model. More...
Static Public Member Functions inherited from regIOobject
template<class Type >
static Type &	store (Type *)
	Transfer ownership of the given object pointer to its registry. More...
template<class Type >
static Type &	store (autoPtr< Type > &)
	Transfer ownership of the given object pointer to its registry. More...
Static Public Member Functions inherited from IOobject
static bool	fileNameComponents (const fileName &path, fileName &instance, fileName &local, word &name)
	Split path into instance, local, name components. More...
template<class Name >
static word	groupName (Name name, const word &group)
template<class Stream >
static Stream &	writeBanner (Stream &os, bool noHint=false)
	Write the standard OpenFOAM file/dictionary banner. More...
template<class Stream >
static Stream &	writeDivider (Stream &os)
	Write the standard file section divider. More...
template<class Stream >
static Stream &	writeEndDivider (Stream &os)
	Write the standard end file divider. More...
Static Public Member Functions inherited from dictionary
static autoPtr< dictionary >	New (Istream &)
	Construct top-level dictionary on freestore from Istream. More...
Static Public Attributes inherited from surfaceFilmModel
static const dimensionedScalar	Tref
	Reference temperature for enthalpy. More...
Static Public Attributes inherited from regIOobject
static float	fileModificationSkew
Static Public Attributes inherited from IOobject
static const NamedEnum< fileCheckTypes, 4 >	fileCheckTypesNames
static fileCheckTypes	fileModificationChecking
	Type of file modification checking. More...
Static Public Attributes inherited from dictionary
static const dictionary	null
	Null dictionary. More...
Static Protected Attributes inherited from regIOobject
static bool	masterOnlyReading = false
	To flag master-only reading of objects. More...

Detailed Description

Definition at line 64 of file kinematicSingleLayer.H.

Constructor & Destructor Documentation

kinematicSingleLayer()

kinematicSingleLayer	(	const word &	modelType,
		const fvMesh &	mesh,
		const dimensionedVector &	g,
		const word &	regionType,
		const bool	readFields = true
	)

Construct from components.

Definition at line 446 of file kinematicSingleLayer.C.

References IOobject::AUTO_WRITE, kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::correctThermoFields(), kinematicSingleLayer::delta_, kinematicSingleLayer::deltaRho_, Foam::fvc::flux(), Foam::constant::electromagnetic::phi0, kinematicSingleLayer::phi_, IOobject::READ_IF_PRESENT, regionModel::regionMesh(), kinematicSingleLayer::rho_, regionModel::time(), timeName, kinematicSingleLayer::transferPrimaryRegionThermoFields(), and kinematicSingleLayer::U_.

Here is the call graph for this function:

~kinematicSingleLayer()

~kinematicSingleLayer ( )

virtual

Destructor.

Definition at line 836 of file kinematicSingleLayer.C.

References kinematicSingleLayer::addSources().

Here is the call graph for this function:

Member Function Documentation

read()

bool read ( )

protectedvirtual

Read control parameters from dictionary.

Reimplemented from surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 56 of file kinematicSingleLayer.C.

References dictionary::lookup(), kinematicSingleLayer::momentumPredictor_, kinematicSingleLayer::nCorr_, kinematicSingleLayer::nNonOrthCorr_, kinematicSingleLayer::nOuterCorr_, surfaceFilmModel::read(), dictionary::readIfPresent(), regionModel::solution(), and dictionary::subDict().

Referenced by thermoSingleLayer::read().

Here is the call graph for this function:

Here is the caller graph for this function:

correctThermoFields()

void correctThermoFields ( )

protectedvirtual

Correct the thermo fields.

Reimplemented in thermoSingleLayer.

Definition at line 75 of file kinematicSingleLayer.C.

References kinematicSingleLayer::filmThermo_, kinematicSingleLayer::mu_, kinematicSingleLayer::rho_, and kinematicSingleLayer::sigma_.

Referenced by kinematicSingleLayer::kinematicSingleLayer(), and kinematicSingleLayer::preEvolveRegion().

Here is the caller graph for this function:

resetPrimaryRegionSourceTerms()

void resetPrimaryRegionSourceTerms ( )

protectedvirtual

Reset source term fields.

Reimplemented in thermoSingleLayer.

Definition at line 83 of file kinematicSingleLayer.C.

References DimensionedField< Type, GeoMesh >::dimensions(), Foam::endl(), InfoInFunction, kinematicSingleLayer::pSp_, kinematicSingleLayer::pSpPrimary_, kinematicSingleLayer::rhoSp_, kinematicSingleLayer::rhoSpPrimary_, kinematicSingleLayer::USp_, kinematicSingleLayer::USpPrimary_, and Foam::Zero.

Referenced by kinematicSingleLayer::evolveRegion(), and thermoSingleLayer::resetPrimaryRegionSourceTerms().

Here is the call graph for this function:

Here is the caller graph for this function:

transferPrimaryRegionThermoFields()

void transferPrimaryRegionThermoFields ( )

protectedvirtual

Transfer thermo fields from the primary region to the film region.

Reimplemented in thermoSingleLayer.

Definition at line 96 of file kinematicSingleLayer.C.

References GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), Foam::endl(), InfoInFunction, kinematicSingleLayer::muPrimary_, kinematicSingleLayer::pPrimary_, kinematicSingleLayer::rhoPrimary_, and kinematicSingleLayer::UPrimary_.

Referenced by kinematicSingleLayer::kinematicSingleLayer(), kinematicSingleLayer::preEvolveRegion(), and thermoSingleLayer::transferPrimaryRegionThermoFields().

Here is the call graph for this function:

Here is the caller graph for this function:

transferPrimaryRegionSourceFields()

void transferPrimaryRegionSourceFields ( )

protectedvirtual

Transfer source fields from the primary region to the film region.

Reimplemented in thermoSingleLayer.

Definition at line 112 of file kinematicSingleLayer.C.

References dictionary::add(), kinematicSingleLayer::addedMassTotal_, GeometricField< Type, PatchField, GeoMesh >::boundaryField(), GeometricField< Type, PatchField, GeoMesh >::boundaryFieldRef(), GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), TimeState::deltaTValue(), Foam::endl(), forAll, InfoInFunction, singleLayerRegion::magSf(), regionModel::outputProperties(), patchi, regionModel::primaryMesh(), kinematicSingleLayer::pSp_, kinematicSingleLayer::pSpPrimary_, dictionary::readIfPresent(), Foam::returnReduce(), kinematicSingleLayer::rhoSp_, kinematicSingleLayer::rhoSpPrimary_, regionModel::time(), regionModel::time_, kinematicSingleLayer::USp_, and kinematicSingleLayer::USpPrimary_.

Referenced by kinematicSingleLayer::preEvolveRegion(), and thermoSingleLayer::transferPrimaryRegionSourceFields().

Here is the call graph for this function:

Here is the caller graph for this function:

pu()

tmp< volScalarField > pu ( )

protectedvirtual

Explicit pressure source contribution.

Definition at line 163 of file kinematicSingleLayer.C.

References kinematicSingleLayer::delta_, Foam::fvc::laplacian(), IOobject::NO_READ, IOobject::NO_WRITE, kinematicSingleLayer::pPrimary_, kinematicSingleLayer::pSp_, regionModel::regionMesh(), kinematicSingleLayer::sigma_, regionModel::time_, and Time::timeName().

Referenced by thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

pp()

tmp< volScalarField > pp ( )

protectedvirtual

Implicit pressure source coefficient.

Definition at line 185 of file kinematicSingleLayer.C.

References kinematicSingleLayer::gNormClipped(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::regionMesh(), kinematicSingleLayer::rho_, regionModel::time_, and Time::timeName().

Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), thermoSingleLayer::updateSurfaceTemperatures(), and kinematicSingleLayer::updateSurfaceVelocities().

Here is the call graph for this function:

Here is the caller graph for this function:

correctAlpha()

void correctAlpha ( )

protectedvirtual

Correct film coverage field.

Reimplemented in thermoSingleLayer.

Definition at line 205 of file kinematicSingleLayer.C.

References kinematicSingleLayer::alpha_, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaSmall_, and Foam::pos().

Referenced by kinematicSingleLayer::evolveRegion(), and kinematicSingleLayer::kinematicSingleLayer().

Here is the call graph for this function:

Here is the caller graph for this function:

updateSubmodels()

void updateSubmodels ( )

protectedvirtual

Update the film sub-models.

Reimplemented in thermoSingleLayer.

Definition at line 211 of file kinematicSingleLayer.C.

References kinematicSingleLayer::availableMass_, kinematicSingleLayer::cloudDiameterTrans_, kinematicSingleLayer::cloudMassTrans_, transferModelList::correct(), injectionModelList::correct(), TimeState::deltaT(), Foam::endl(), InfoInFunction, kinematicSingleLayer::injection_, singleLayerRegion::magSf(), kinematicSingleLayer::rhoSp_, regionModel::time(), kinematicSingleLayer::transfer_, and kinematicSingleLayer::turbulence_.

Referenced by kinematicSingleLayer::evolveRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

continuityCheck()

void continuityCheck ( )

protectedvirtual

Continuity check.

Definition at line 231 of file kinematicSingleLayer.C.

References kinematicSingleLayer::cumulativeContErr_, kinematicSingleLayer::deltaRho_, Foam::dimMass, Foam::dimVolume, Foam::fvc::domainIntegrate(), Foam::endl(), globalContErr, InfoInFunction, Foam::mag(), singleLayerRegion::magSf(), kinematicSingleLayer::mass(), Foam::nl, kinematicSingleLayer::solveContinuity(), sumLocalContErr, totalMass, and Foam::type().

Referenced by kinematicSingleLayer::solveThickness().

Here is the call graph for this function:

Here is the caller graph for this function:

updateSurfaceVelocities()

void updateSurfaceVelocities ( )

protectedvirtual

Update film surface velocities.

Definition at line 282 of file kinematicSingleLayer.C.

References GeometricField< Type, PatchField, GeoMesh >::boundaryField(), polyMesh::boundaryMesh(), GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), polyPatch::faceCells(), regionModel::intCoupledPatchIDs_, singleLayerRegion::nHat(), patchi, kinematicSingleLayer::pp(), regionModel::regionMesh(), List< T >::size(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::turbulence_, kinematicSingleLayer::U_, kinematicSingleLayer::Us_, and kinematicSingleLayer::Uw_.

Referenced by thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

constrainFilmField()

void constrainFilmField ( Type &  field, const typename Type::cmptType &  value  )

protected

Constrain a film region master/slave boundaries of a field to a.

given value

Definition at line 41 of file kinematicSingleLayerTemplates.C.

References Foam::endl(), forAll, Foam::Info, and patchi.

Referenced by kinematicSingleLayer::solveThickness().

Here is the call graph for this function:

Here is the caller graph for this function:

solveContinuity()

void solveContinuity ( )

protectedvirtual

Solve continuity equation.

Definition at line 265 of file kinematicSingleLayer.C.

References Foam::fvm::ddt(), kinematicSingleLayer::deltaRho_, Foam::fvc::div(), Foam::endl(), InfoInFunction, kinematicSingleLayer::phi_, kinematicSingleLayer::rhoSp_, and Foam::solve().

Referenced by kinematicSingleLayer::continuityCheck(), thermoSingleLayer::evolveRegion(), and kinematicSingleLayer::evolveRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

solveMomentum()

tmp< Foam::fvVectorMatrix > solveMomentum ( const volScalarField &  pu, const volScalarField &  pp  )

protectedvirtual

Solve for film velocity.

Definition at line 300 of file kinematicSingleLayer.C.

References forceList::correct(), GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), Foam::fvm::ddt(), kinematicSingleLayer::delta_, kinematicSingleLayer::deltaRho_, Foam::fvm::div(), Foam::endl(), Foam::fvc::flux(), kinematicSingleLayer::forces_, kinematicSingleLayer::gTan(), InfoInFunction, Foam::fvc::interpolate(), singleLayerRegion::magSf(), kinematicSingleLayer::momentumPredictor_, singleLayerRegion::nHat(), kinematicSingleLayer::phi_, Foam::fvc::reconstruct(), regionModel::regionMesh(), kinematicSingleLayer::rho_, kinematicSingleLayer::rhoSp_, Foam::fvc::snGrad(), Foam::solve(), kinematicSingleLayer::solveThickness(), tUEqn(), kinematicSingleLayer::turbulence_, kinematicSingleLayer::U_, UEqn, and kinematicSingleLayer::USp_.

Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), and kinematicSingleLayer::updateSurfaceVelocities().

Here is the call graph for this function:

Here is the caller graph for this function:

solveThickness()

void solveThickness ( const volScalarField &  pu, const volScalarField &  pp, const fvVectorMatrix &  UEqn  )

protectedvirtual

Solve coupled velocity-thickness equations.

Definition at line 358 of file kinematicSingleLayer.C.

References fvMatrix< Type >::A(), kinematicSingleLayer::constrainFilmField(), kinematicSingleLayer::continuityCheck(), GeometricField< Type, PatchField, GeoMesh >::correctBoundaryConditions(), Foam::fvm::ddt(), kinematicSingleLayer::delta_, Foam::fvm::div(), Foam::endl(), Foam::fvc::flux(), fvMatrix< Type >::flux(), kinematicSingleLayer::gTan(), fvMatrix< Type >::H(), InfoInFunction, Foam::fvc::interpolate(), Foam::fvm::laplacian(), singleLayerRegion::magSf(), fvMesh::magSf(), GeometricField< Type, PatchField, GeoMesh >::max(), IOobject::name(), singleLayerRegion::nHat(), kinematicSingleLayer::nNonOrthCorr_, kinematicSingleLayer::phi_, phid(), Foam::fvc::reconstruct(), regionModel::regionMesh(), kinematicSingleLayer::rho_, rhof(), kinematicSingleLayer::rhoSp_, fvSchemes::setFluxRequired(), Foam::fvc::snGrad(), fvMatrix< Type >::solve(), and kinematicSingleLayer::U_.

Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), and kinematicSingleLayer::solveMomentum().

Here is the call graph for this function:

Here is the caller graph for this function:

TypeName()

TypeName

(

"kinematicSingleLayer"

)

Runtime type information.

CourantNumber()

scalar CourantNumber ( ) const

virtual

Courant number evaluation.

Reimplemented from surfaceFilmModel.

Definition at line 939 of file kinematicSingleLayer.C.

References CoNum, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaCoLimit_, kinematicSingleLayer::deltaRho_, TimeState::deltaTValue(), Foam::endl(), forAll, Foam::Info, Foam::mag(), singleLayerRegion::magSf(), Foam::max(), kinematicSingleLayer::phi_, GeometricField< Type, PatchField, GeoMesh >::primitiveField(), Foam::reduce(), regionModel::regionMesh(), Foam::fvc::surfaceSum(), and regionModel::time_.

Here is the call graph for this function:

momentumPredictor()

const Switch & momentumPredictor ( ) const

inline

Return the momentum predictor.

Definition at line 41 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::momentumPredictor_.

nOuterCorr()

label nOuterCorr ( ) const

inline

Return the number of outer correctors.

Definition at line 47 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::nOuterCorr_.

nCorr()

label nCorr ( ) const

inline

Return the number of PISO correctors.

Definition at line 53 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::nCorr_.

nNonOrthCorr()

label nNonOrthCorr ( ) const

inline

Return the number of non-orthogonal correctors.

Definition at line 59 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::nNonOrthCorr_.

deltaSmall()

const dimensionedScalar & deltaSmall ( ) const

inline

Return small delta.

Definition at line 65 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::deltaSmall_.

Referenced by thixotropicViscosity::correct(), and laminar::Su().

Here is the caller graph for this function:

mu()

const volScalarField & mu ( ) const

inline

Return const access to the dynamic viscosity [Pa.s].

Definition at line 71 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::mu_.

Referenced by laminar::Su().

Here is the caller graph for this function:

sigma()

const volScalarField & sigma ( ) const

inlinevirtual

Return const access to the surface tension [kg/s2].

Implements surfaceFilmModel.

Definition at line 77 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::sigma_.

Referenced by BrunDrippingInjection::correct(), and curvatureSeparation::correct().

Here is the caller graph for this function:

delta()

const volScalarField & delta ( ) const

inlinevirtual

Return const access to the film thickness [m].

Implements surfaceFilmModel.

Definition at line 83 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::delta_.

Referenced by drippingInjection::correct(), BrunDrippingInjection::correct(), curvatureSeparation::correct(), thixotropicViscosity::correct(), standardPhaseChange::correctModel(), and laminar::Su().

Here is the caller graph for this function:

alpha()

const volScalarField & alpha ( ) const

inlinevirtual

Return the film coverage, 1 = covered, 0 = uncovered [].

Implements surfaceFilmModel.

Definition at line 89 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::alpha_.

Referenced by thixotropicViscosity::correct(), solidification::correctModel(), and thermoSingleLayer::q().

Here is the caller graph for this function:

U()

const volVectorField & U ( ) const

virtual

Return the film velocity [m/s].

Implements surfaceFilmModel.

Definition at line 970 of file kinematicSingleLayer.C.

References kinematicSingleLayer::U_.

Referenced by curvatureSeparation::correct(), and thixotropicViscosity::correct().

Here is the caller graph for this function:

Us()

const volVectorField & Us ( ) const

virtual

Return the film surface velocity [m/s].

Implements surfaceFilmModel.

Definition at line 976 of file kinematicSingleLayer.C.

References kinematicSingleLayer::Us_.

Referenced by standardPhaseChange::correctModel().

Here is the caller graph for this function:

Uw()

const volVectorField & Uw ( ) const

virtual

Return the film wall velocity [m/s].

Implements surfaceFilmModel.

Definition at line 982 of file kinematicSingleLayer.C.

References kinematicSingleLayer::Uw_.

Referenced by thixotropicViscosity::correct(), and laminar::Su().

Here is the caller graph for this function:

deltaRho()

const volScalarField & deltaRho ( ) const

virtual

Return the film thickness*density (helper field) [kg/m3].

Definition at line 988 of file kinematicSingleLayer.C.

References kinematicSingleLayer::deltaRho_.

Referenced by thixotropicViscosity::correct().

Here is the caller graph for this function:

phi()

const surfaceScalarField & phi ( ) const

virtual

Return the film flux [kg.m/s].

Definition at line 994 of file kinematicSingleLayer.C.

References kinematicSingleLayer::phi_.

Referenced by curvatureSeparation::correct(), and thixotropicViscosity::correct().

Here is the caller graph for this function:

rho()

const volScalarField & rho ( ) const

virtual

Return the film density [kg/m3].

Implements surfaceFilmModel.

Definition at line 1000 of file kinematicSingleLayer.C.

References kinematicSingleLayer::rho_.

Referenced by drippingInjection::correct(), BrunDrippingInjection::correct(), curvatureSeparation::correct(), solidification::correctModel(), and standardPhaseChange::correctModel().

Here is the caller graph for this function:

T()

const volScalarField & T ( ) const

virtual

Return the film mean temperature [K].

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1006 of file kinematicSingleLayer.C.

References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().

Here is the call graph for this function:

Ts()

const volScalarField & Ts ( ) const

virtual

Return the film surface temperature [K].

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1015 of file kinematicSingleLayer.C.

References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().

Here is the call graph for this function:

Tw()

const volScalarField & Tw ( ) const

virtual

Return the film wall temperature [K].

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1024 of file kinematicSingleLayer.C.

References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().

Here is the call graph for this function:

hs()

const volScalarField & hs ( ) const

virtual

Return the film surface enthalpy [J/kg].

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1033 of file kinematicSingleLayer.C.

References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().

Here is the call graph for this function:

Cp()

const volScalarField & Cp ( ) const

virtual

Return the film specific heat capacity [J/kg/K].

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1042 of file kinematicSingleLayer.C.

References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().

Here is the call graph for this function:

kappa()

const volScalarField & kappa ( ) const

virtual

Return the film thermal conductivity [W/m/K].

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1051 of file kinematicSingleLayer.C.

References Foam::abort(), Foam::FatalError, FatalErrorInFunction, GeometricField< scalar, fvPatchField, volMesh >::null(), and Foam::type().

Here is the call graph for this function:

primaryMassTrans()

tmp< volScalarField > primaryMassTrans ( ) const

virtual

Return mass transfer source - Eulerian phase only.

Implements surfaceFilmModel.

Definition at line 1060 of file kinematicSingleLayer.C.

References kinematicSingleLayer::primaryMassTrans_.

cloudMassTrans()

const volScalarField & cloudMassTrans ( ) const

virtual

Return the film mass available for transfer to cloud.

Implements surfaceFilmModel.

Definition at line 1066 of file kinematicSingleLayer.C.

References kinematicSingleLayer::cloudMassTrans_.

cloudDiameterTrans()

const volScalarField & cloudDiameterTrans ( ) const

virtual

Return the parcel diameters originating from film to cloud.

Implements surfaceFilmModel.

Definition at line 1072 of file kinematicSingleLayer.C.

References kinematicSingleLayer::cloudDiameterTrans_.

addSources()

void addSources ( const label  patchi, const label  facei, const scalar  massSource, const vector &  momentumSource, const scalar  pressureSource, const scalar  energySource = 0  )

virtual

External hook to add sources to the film.

Implements surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 843 of file kinematicSingleLayer.C.

References kinematicSingleLayer::addedMassTotal_, GeometricField< Type, PatchField, GeoMesh >::boundaryFieldRef(), Foam::endl(), InfoInFunction, Foam::nl, patchi, kinematicSingleLayer::pSpPrimary_, kinematicSingleLayer::rhoSpPrimary_, Foam::type(), and kinematicSingleLayer::USpPrimary_.

Referenced by thermoSingleLayer::addSources(), and kinematicSingleLayer::~kinematicSingleLayer().

Here is the call graph for this function:

Here is the caller graph for this function:

USpPrimary()

volVectorField & USpPrimary ( )

inline

Momementum [kg/m/s2].

Definition at line 95 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::USpPrimary_.

pSpPrimary()

volScalarField & pSpPrimary ( )

inline

Pressure [Pa].

Definition at line 101 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::pSpPrimary_.

rhoSpPrimary()

volScalarField & rhoSpPrimary ( )

inline

Mass [kg/m2/s].

Definition at line 107 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::rhoSpPrimary_.

USp() [1/2]

volVectorField & USp ( )

inline

Momentum [kg/m/s2].

Definition at line 113 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::USp_.

pSp() [1/2]

volScalarField & pSp ( )

inline

Pressure [Pa].

Definition at line 119 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::pSp_.

rhoSp() [1/2]

volScalarField & rhoSp ( )

inline

Mass [kg/m2/s].

Definition at line 125 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::rhoSp_.

USp() [2/2]

const volVectorField & USp ( ) const

inline

Momentum [kg/m/s2].

Definition at line 131 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::USp_.

pSp() [2/2]

const volScalarField & pSp ( ) const

inline

Pressure [Pa].

Definition at line 137 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::pSp_.

rhoSp() [2/2]

const volScalarField & rhoSp ( ) const

inline

Mass [kg/m2/s].

Definition at line 143 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::rhoSp_.

UPrimary()

const volVectorField & UPrimary ( ) const

inline

Velocity [m/s].

Definition at line 149 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::UPrimary_.

Referenced by standardPhaseChange::correctModel(), and laminar::Su().

Here is the caller graph for this function:

pPrimary()

const volScalarField & pPrimary ( ) const

inline

Pressure [Pa].

Definition at line 155 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::pPrimary_.

Referenced by standardPhaseChange::correctModel(), liquidFilmThermo::Cp(), liquidFilmThermo::kappa(), liquidFilmThermo::mu(), liquidFilmThermo::rho(), and liquidFilmThermo::sigma().

Here is the caller graph for this function:

rhoPrimary()

const volScalarField & rhoPrimary ( ) const

inline

Density [kg/m3].

Definition at line 161 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::rhoPrimary_.

Referenced by standardPhaseChange::correctModel(), and laminar::Su().

Here is the caller graph for this function:

muPrimary()

const volScalarField & muPrimary ( ) const

inline

Viscosity [Pa.s].

Definition at line 167 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::muPrimary_.

Referenced by standardPhaseChange::correctModel().

Here is the caller graph for this function:

filmThermo()

const filmThermoModel & filmThermo ( ) const

inline

Film thermo.

Definition at line 173 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::filmThermo_.

Referenced by liquidViscosity::correct(), and standardPhaseChange::correctModel().

Here is the caller graph for this function:

injection()

injectionModelList & injection ( )

inline

Injection.

Definition at line 179 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::injection_.

transfer()

transferModelList & transfer ( )

inline

Transfer.

Definition at line 185 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::transfer_.

turbulence()

const filmTurbulenceModel & turbulence ( ) const

inline

Turbulence.

Definition at line 191 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::turbulence_.

mass()

tmp< volScalarField > mass ( ) const

inline

Return the current film mass.

Definition at line 197 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::delta_, singleLayerRegion::magSf(), and kinematicSingleLayer::rho_.

Referenced by kinematicSingleLayer::continuityCheck().

Here is the call graph for this function:

Here is the caller graph for this function:

netMass()

tmp< volScalarField > netMass ( ) const

inline

Return the net film mass available over the next integration.

Definition at line 203 of file kinematicSingleLayerI.H.

References kinematicSingleLayer::delta_, kinematicSingleLayer::deltaSmall_, TimeState::deltaT(), Foam::fvc::interpolate(), singleLayerRegion::magSf(), kinematicSingleLayer::phi_, Foam::pos0(), kinematicSingleLayer::rho_, Foam::fvc::surfaceSum(), and regionModel::time().

Referenced by thixotropicViscosity::correct(), and kinematicSingleLayer::preEvolveRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

deltaMass()

tmp< volScalarField > deltaMass ( ) const

inline

Return the change in film mass due to sources/sinks.

Definition at line 214 of file kinematicSingleLayerI.H.

References TimeState::deltaT(), singleLayerRegion::magSf(), kinematicSingleLayer::rhoSp_, and regionModel::time().

Referenced by thixotropicViscosity::correct().

Here is the call graph for this function:

Here is the caller graph for this function:

gNorm()

tmp< volScalarField > gNorm ( ) const

inline

Return the gravity normal-to-patch component contribution.

Definition at line 220 of file kinematicSingleLayerI.H.

References surfaceFilmModel::g_, singleLayerRegion::nHat(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::regionMesh(), regionModel::time(), and timeName.

Referenced by drippingInjection::correct(), BrunDrippingInjection::correct(), and kinematicSingleLayer::gTan().

Here is the call graph for this function:

Here is the caller graph for this function:

gNormClipped()

tmp< volScalarField > gNormClipped ( ) const

inline

Return the gravity normal-to-patch component contribution.

Clipped so that only non-zero if g & nHat_ < 0

Definition at line 242 of file kinematicSingleLayerI.H.

References surfaceFilmModel::g_, GeometricField< Type, PatchField, GeoMesh >::min(), singleLayerRegion::nHat(), IOobject::NO_READ, IOobject::NO_WRITE, tmp< T >::ref(), regionModel::regionMesh(), regionModel::time(), and timeName.

Referenced by kinematicSingleLayer::pp().

Here is the call graph for this function:

Here is the caller graph for this function:

gTan()

tmp< volVectorField > gTan ( ) const

inline

Return the gravity tangential component contributions.

Definition at line 267 of file kinematicSingleLayerI.H.

References surfaceFilmModel::g_, kinematicSingleLayer::gNorm(), singleLayerRegion::nHat(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::regionMesh(), regionModel::time(), and timeName.

Referenced by kinematicSingleLayer::solveMomentum(), and kinematicSingleLayer::solveThickness().

Here is the call graph for this function:

Here is the caller graph for this function:

preEvolveRegion()

void preEvolveRegion ( )

virtual

Pre-evolve film hook.

Reimplemented from regionModel.

Reimplemented in thermoSingleLayer.

Definition at line 869 of file kinematicSingleLayer.C.

References kinematicSingleLayer::availableMass_, kinematicSingleLayer::cloudDiameterTrans_, kinematicSingleLayer::cloudMassTrans_, kinematicSingleLayer::correctThermoFields(), Foam::dimLength, Foam::dimMass, Foam::endl(), InfoInFunction, kinematicSingleLayer::netMass(), regionModel::preEvolveRegion(), kinematicSingleLayer::primaryMassTrans_, kinematicSingleLayer::transferPrimaryRegionSourceFields(), and kinematicSingleLayer::transferPrimaryRegionThermoFields().

Referenced by thermoSingleLayer::preEvolveRegion().

Here is the call graph for this function:

Here is the caller graph for this function:

evolveRegion()

void evolveRegion ( )

virtual

Evolve the film equations.

Reimplemented from regionModel.

Reimplemented in thermoSingleLayer.

Definition at line 893 of file kinematicSingleLayer.C.

References kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::delta_, kinematicSingleLayer::deltaRho_, Foam::endl(), InfoInFunction, kinematicSingleLayer::nCorr_, kinematicSingleLayer::nOuterCorr_, kinematicSingleLayer::pp(), kinematicSingleLayer::pu(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::rho_, kinematicSingleLayer::solveContinuity(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), UEqn, kinematicSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSurfaceVelocities().

Here is the call graph for this function:

Srho() [1/2]

tmp< volScalarField::Internal > Srho ( ) const

virtual

Return total mass source - Eulerian phase only.

Reimplemented from surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1103 of file kinematicSingleLayer.C.

References Foam::dimMass, Foam::dimVolume, IOobject::NO_READ, IOobject::NO_WRITE, regionModel::primaryMesh(), regionModel::time(), and timeName.

Here is the call graph for this function:

Srho() [2/2]

tmp< volScalarField::Internal > Srho ( const label  i ) const

virtual

Return mass source for specie i - Eulerian phase only.

Reimplemented from surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1126 of file kinematicSingleLayer.C.

References Foam::dimMass, Foam::dimVolume, Foam::name(), IOobject::NO_READ, IOobject::NO_WRITE, regionModel::primaryMesh(), regionModel::time(), and timeName.

Here is the call graph for this function:

Sh()

tmp< volScalarField::Internal > Sh ( ) const

virtual

Return enthalpy source - Eulerian phase only.

Reimplemented from surfaceFilmModel.

Reimplemented in thermoSingleLayer.

Definition at line 1150 of file kinematicSingleLayer.C.

References Foam::dimEnergy, Foam::dimVolume, IOobject::NO_READ, IOobject::NO_WRITE, regionModel::primaryMesh(), regionModel::time(), and timeName.

Here is the call graph for this function:

info()

void info ( )

virtual

Provide some feedback.

Reimplemented from regionModel.

Reimplemented in thermoSingleLayer.

Definition at line 1078 of file kinematicSingleLayer.C.

References kinematicSingleLayer::addedMassTotal_, kinematicSingleLayer::alpha_, kinematicSingleLayer::delta_, kinematicSingleLayer::deltaRho_, Foam::endl(), Foam::gMax(), Foam::gMin(), Foam::gSum(), Foam::indent(), injectionModelList::info(), transferModelList::info(), Foam::Info, kinematicSingleLayer::injection_, Foam::mag(), singleLayerRegion::magSf(), Foam::nl, regionModel::outputProperties(), GeometricField< Type, PatchField, GeoMesh >::primitiveField(), dictionary::readIfPresent(), Foam::returnReduce(), kinematicSingleLayer::transfer_, Foam::type(), and kinematicSingleLayer::U_.

Referenced by thermoSingleLayer::info().

Here is the call graph for this function:

Here is the caller graph for this function:

Member Data Documentation

momentumPredictor_

Switch momentumPredictor_

protected

Momentum predictor.

Definition at line 86 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::momentumPredictor(), kinematicSingleLayer::read(), and kinematicSingleLayer::solveMomentum().

nOuterCorr_

label nOuterCorr_

protected

Number of outer correctors.

Definition at line 89 of file kinematicSingleLayer.H.

Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::nOuterCorr(), and kinematicSingleLayer::read().

nCorr_

label nCorr_

protected

Number of PISO-like correctors.

Definition at line 92 of file kinematicSingleLayer.H.

Referenced by thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::nCorr(), and kinematicSingleLayer::read().

nNonOrthCorr_

label nNonOrthCorr_

protected

Number of non-orthogonal correctors.

Definition at line 95 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::nNonOrthCorr(), kinematicSingleLayer::read(), and kinematicSingleLayer::solveThickness().

cumulativeContErr_

scalar cumulativeContErr_

protected

Cumulative continuity error.

Definition at line 98 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::continuityCheck().

deltaSmall_

const dimensionedScalar deltaSmall_

protected

Small delta.

Definition at line 101 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::deltaSmall(), kinematicSingleLayer::netMass(), and thermoSingleLayer::q().

deltaCoLimit_

scalar deltaCoLimit_

protected

Film thickness above which Courant number calculation in valid.

Definition at line 104 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::CourantNumber().

rho_

volScalarField rho_

protected

Density [kg/m3].

Definition at line 112 of file kinematicSingleLayer.H.

Referenced by thermoSingleLayer::correctThermoFields(), kinematicSingleLayer::correctThermoFields(), thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::kinematicSingleLayer(), kinematicSingleLayer::mass(), kinematicSingleLayer::netMass(), kinematicSingleLayer::pp(), kinematicSingleLayer::rho(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), and thermoSingleLayer::thermoSingleLayer().

mu_

volScalarField mu_

protected

Dynamic viscosity [Pa.s].

Definition at line 115 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::correctThermoFields(), and kinematicSingleLayer::mu().

sigma_

volScalarField sigma_

protected

Surface tension [m/s2].

Definition at line 118 of file kinematicSingleLayer.H.

Referenced by thermoSingleLayer::correctThermoFields(), kinematicSingleLayer::correctThermoFields(), kinematicSingleLayer::pu(), and kinematicSingleLayer::sigma().

delta_

volScalarField delta_

protected

Film thickness [m].

Definition at line 124 of file kinematicSingleLayer.H.

Referenced by thermoSingleLayer::correctAlpha(), kinematicSingleLayer::correctAlpha(), kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::delta(), thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::info(), kinematicSingleLayer::kinematicSingleLayer(), kinematicSingleLayer::mass(), kinematicSingleLayer::netMass(), kinematicSingleLayer::pu(), thermoSingleLayer::q(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), and thermoSingleLayer::thermoSingleLayer().

alpha_

volScalarField alpha_

protected

Film coverage indicator, 1 = covered, 0 = uncovered [].

Definition at line 127 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::alpha(), thermoSingleLayer::correctAlpha(), kinematicSingleLayer::correctAlpha(), and kinematicSingleLayer::info().

U_

volVectorField U_

protected

Velocity - mean [m/s].

Definition at line 130 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::info(), kinematicSingleLayer::kinematicSingleLayer(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), thermoSingleLayer::thermoSingleLayer(), kinematicSingleLayer::U(), and kinematicSingleLayer::updateSurfaceVelocities().

Us_

volVectorField Us_

protected

Velocity - surface [m/s].

Definition at line 133 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::updateSurfaceVelocities(), and kinematicSingleLayer::Us().

Uw_

volVectorField Uw_

protected

Velocity - wall [m/s].

Definition at line 136 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::updateSurfaceVelocities(), and kinematicSingleLayer::Uw().

deltaRho_

volScalarField deltaRho_

protected

Film thickness*density (helper field) [kg/m2].

Definition at line 139 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::continuityCheck(), kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::deltaRho(), thermoSingleLayer::evolveRegion(), kinematicSingleLayer::evolveRegion(), kinematicSingleLayer::info(), kinematicSingleLayer::kinematicSingleLayer(), kinematicSingleLayer::solveContinuity(), thermoSingleLayer::solveEnergy(), kinematicSingleLayer::solveMomentum(), and thermoSingleLayer::thermoSingleLayer().

phi_

surfaceScalarField phi_

protected

Mass flux (includes film thickness) [kg.m/s].

Definition at line 142 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::CourantNumber(), kinematicSingleLayer::kinematicSingleLayer(), kinematicSingleLayer::netMass(), kinematicSingleLayer::phi(), kinematicSingleLayer::solveContinuity(), thermoSingleLayer::solveEnergy(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), and thermoSingleLayer::thermoSingleLayer().

primaryMassTrans_

volScalarField primaryMassTrans_

protected

Film mass available for transfer to the primary region.

Definition at line 148 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::preEvolveRegion(), kinematicSingleLayer::primaryMassTrans(), thermoSingleLayer::Srho(), and thermoSingleLayer::updateSubmodels().

cloudMassTrans_

volScalarField cloudMassTrans_

protected

Film mass available for transfer to cloud.

Definition at line 151 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::cloudMassTrans(), kinematicSingleLayer::preEvolveRegion(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().

cloudDiameterTrans_

volScalarField cloudDiameterTrans_

protected

Parcel diameters originating from film to cloud.

Definition at line 154 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::cloudDiameterTrans(), kinematicSingleLayer::preEvolveRegion(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().

USp_

volVectorField USp_

protected

Momementum [kg/m/s2].

Definition at line 164 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), and kinematicSingleLayer::USp().

pSp_

volScalarField pSp_

protected

Pressure [Pa].

Definition at line 167 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::pSp(), kinematicSingleLayer::pu(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), thermoSingleLayer::thermoSingleLayer(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), and thermoSingleLayer::updateSubmodels().

rhoSp_

volScalarField rhoSp_

protected

Mass [kg/m2/s].

Definition at line 170 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::deltaMass(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::rhoSp(), kinematicSingleLayer::solveContinuity(), kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::solveThickness(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().

USpPrimary_

volVectorField USpPrimary_

protected

Momementum [kg/m/s2].

Definition at line 177 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::addSources(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::transferPrimaryRegionSourceFields(), and kinematicSingleLayer::USpPrimary().

pSpPrimary_

volScalarField pSpPrimary_

protected

Pressure [Pa].

Definition at line 180 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::addSources(), kinematicSingleLayer::pSpPrimary(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), and kinematicSingleLayer::transferPrimaryRegionSourceFields().

rhoSpPrimary_

volScalarField rhoSpPrimary_

protected

Mass [kg/m2/s].

Definition at line 183 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::addSources(), kinematicSingleLayer::resetPrimaryRegionSourceTerms(), kinematicSingleLayer::rhoSpPrimary(), and kinematicSingleLayer::transferPrimaryRegionSourceFields().

UPrimary_

volVectorField UPrimary_

protected

Velocity [m/s].

Definition at line 190 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::transferPrimaryRegionThermoFields(), and kinematicSingleLayer::UPrimary().

pPrimary_

volScalarField pPrimary_

protected

Pressure [Pa].

Definition at line 193 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::pPrimary(), kinematicSingleLayer::pu(), thermoSingleLayer::solveEnergy(), thermoSingleLayer::thermoSingleLayer(), and kinematicSingleLayer::transferPrimaryRegionThermoFields().

rhoPrimary_

volScalarField rhoPrimary_

protected

Density [kg/m3].

Definition at line 196 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::rhoPrimary(), kinematicSingleLayer::transferPrimaryRegionThermoFields(), and thermoSingleLayer::updateSubmodels().

muPrimary_

volScalarField muPrimary_

protected

Viscosity [Pa.s].

Definition at line 199 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::muPrimary(), and kinematicSingleLayer::transferPrimaryRegionThermoFields().

filmThermo_

autoPtr<filmThermoModel> filmThermo_

protected

Film thermo model.

Definition at line 205 of file kinematicSingleLayer.H.

Referenced by thermoSingleLayer::correctThermoFields(), kinematicSingleLayer::correctThermoFields(), kinematicSingleLayer::filmThermo(), and thermoSingleLayer::Srho().

availableMass_

scalarField availableMass_

protected

Available mass for transfer via sub-models.

Definition at line 208 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::preEvolveRegion(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().

injection_

injectionModelList injection_

protected

Cloud injection.

Definition at line 211 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::info(), kinematicSingleLayer::injection(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().

transfer_

transferModelList transfer_

protected

Transfer with the continuous phase.

Definition at line 214 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::info(), kinematicSingleLayer::transfer(), thermoSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSubmodels().

turbulence_

autoPtr<filmTurbulenceModel> turbulence_

protected

Turbulence model.

Definition at line 217 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::solveMomentum(), kinematicSingleLayer::turbulence(), thermoSingleLayer::updateSubmodels(), kinematicSingleLayer::updateSubmodels(), and kinematicSingleLayer::updateSurfaceVelocities().

forces_

forceList forces_

protected

List of film forces.

Definition at line 220 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::solveMomentum().

addedMassTotal_

scalar addedMassTotal_

protected

Cumulative mass added via sources [kg].

Definition at line 226 of file kinematicSingleLayer.H.

Referenced by kinematicSingleLayer::addSources(), kinematicSingleLayer::info(), and kinematicSingleLayer::transferPrimaryRegionSourceFields().

---

The documentation for this class was generated from the following files:

• src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayer.H
• src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayer.C
• src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayerI.H
• src/regionModels/surfaceFilmModels/kinematicSingleLayer/kinematicSingleLayerTemplates.C