50 #ifndef primitiveMesh_H 51 #define primitiveMesh_H 82 label nInternalPoints_;
88 mutable label nInternal0Edges_;
91 mutable label nInternal1Edges_;
94 mutable label nInternalEdges_;
97 mutable label nEdges_;
100 label nInternalFaces_;
190 void calcCellShapes()
const;
193 void calcCellCells()
const;
196 void calcPointCells()
const;
199 void calcCells()
const;
202 void calcCellEdges()
const;
205 void calcPointPoints()
const;
210 void calcEdges(
const bool doFaceEdges)
const;
211 void clearOutEdges();
221 static label findFirstCommonElementFromSortedLists
318 const bool detailedReport,
327 const bool detailedReport,
346 const bool detailedReport,
347 const scalar minPyrVol,
383 const scalar warnFlatness,
540 static void calcCells
608 const bool report =
false,
615 const bool report =
false,
622 const bool report =
false,
629 const bool report =
false,
636 const bool report =
false,
650 const bool report =
false,
659 const bool report =
false,
666 const bool report =
false,
673 const bool report =
false,
680 const bool report =
false,
681 const scalar minPyrVol = -SMALL,
688 const bool report =
false,
695 const bool report =
false,
696 const scalar maxSin = 10,
706 const scalar warnFlatness,
715 const scalar reportDistSqr,
723 const scalar minLenSqr,
730 const bool report =
false,
744 virtual bool checkMesh(
const bool report =
false)
const;
769 scalar inflationFraction = 0
bool hasEdgeFaces() const
bool checkFaceAreas(const vectorField &faceAreas, const bool report, const bool detailedReport, labelHashSet *setPtr) const
Check for negative face areas.
static const unsigned cellsPerEdge_
Estimated number of cells per edge.
A simple container for copying or transferring objects of type <T>.
static scalar aspectThreshold_
Aspect ratio warning threshold.
const labelListList & cellEdges() const
ClassName("primitiveMesh")
bool checkFaceAngles(const pointField &points, const vectorField &faceAreas, const bool report, const scalar maxDeg, labelHashSet *setPtr) const
Check face angles.
void clearAddressing()
Clear topological data.
label findCell(const point &location) const
Find cell enclosing this location (-1 if not in mesh)
bool hasCellCentres() const
intWM_LABEL_SIZE_t label
A label is an int32_t or int64_t as specified by the pre-processor macro WM_LABEL_SIZE.
bool hasCellPoints() const
const labelListList & faceEdges() const
label nInternalFaces() const
const labelListList & pointEdges() const
Cell-face mesh analysis engine.
label nInternalPoints() const
Points not on boundary.
const cellShapeList & cellShapes() const
Return cell shapes.
bool hasCellCells() const
static scalar setClosedThreshold(const scalar)
Set the closedness ratio warning threshold.
void printAllocated() const
Print a list of all the currently allocated mesh data.
virtual bool checkPointNearness(const bool report, const scalar reportDistSqr, labelHashSet *setPtr=nullptr) const
Check for point-point-nearness,.
label nInternal0Edges() const
Internal edges (i.e. not on boundary face) using.
virtual const pointField & points() const =0
Return mesh points.
primitiveMesh()
Construct null.
bool hasCellShapes() const
void makeFaceCentresAndAreas(const pointField &p, vectorField &fCtrs, vectorField &fAreas) const
const cellList & cells() const
bool pointInCell(const point &p, label celli) const
Return true if the point is in the cell.
static const unsigned edgesPerPoint_
Estimated number of edges per point.
bool hasFaceAreas() const
static const unsigned pointsPerCell_
Estimated number of points per cell.
static const unsigned edgesPerFace_
Estimated number of edges per cell.
virtual const pointField & oldPoints() const =0
Return old points for mesh motion.
static const unsigned facesPerPoint_
Estimated number of faces per point.
static scalar setAspectThreshold(const scalar)
Set the aspect ratio warning threshold.
static scalar setSkewThreshold(const scalar)
Set the skewness warning threshold as percentage.
static const unsigned pointsPerFace_
Estimated number of points per face.
bool checkFaceSkewness(const pointField &points, const vectorField &fCtrs, const vectorField &fAreas, const vectorField &cellCtrs, const bool report, labelHashSet *setPtr) const
Check face skewness.
bool checkClosedCells(const vectorField &faceAreas, const scalarField &cellVolumes, const bool report, labelHashSet *setPtr, labelHashSet *aspectSetPtr, const Vector< label > &meshD) const
Check cells for closedness.
const labelListList & edgeCells() const
virtual const labelList & faceNeighbour() const =0
Face face-neighbour addressing.
bool checkFacePyramids(const pointField &points, const vectorField &ctrs, const bool report, const bool detailedReport, const scalar minPyrVol, labelHashSet *setPtr) const
Check face pyramid volume.
static const unsigned facesPerCell_
Estimated number of faces per cell.
void clearGeom()
Clear geometry.
tmp< scalarField > movePoints(const pointField &p, const pointField &oldP)
Move points, returns volumes swept by faces in motion.
bool checkFaceOrthogonality(const vectorField &fAreas, const vectorField &cellCtrs, const bool report, labelHashSet *setPtr) const
Check for non-orthogonality.
static scalar closedThreshold_
Static data to control mesh checking.
void clearOut()
Clear all geometry and addressing unnecessary for CFD.
static const unsigned cellsPerPoint_
Estimated number of cells per point.
label nInternal1Edges() const
Internal edges using 0 or 1 boundary point.
void calcCellCentresAndVols() const
Calculate cell centres and volumes.
virtual bool checkMesh(const bool report=false) const
Check mesh for correctness. Returns false for no error.
bool hasFaceCentres() const
virtual bool checkEdgeLength(const bool report, const scalar minLenSqr, labelHashSet *setPtr=nullptr) const
Check edge length.
void makeCellCentresAndVols(const vectorField &fCtrs, const vectorField &fAreas, vectorField &cellCtrs, scalarField &cellVols) const
static scalar setNonOrthThreshold(const scalar)
Set the non-orthogonality warning threshold in degrees.
const vectorField & cellCentres() const
static const unsigned facesPerEdge_
Estimated number of faces per edge.
A 1D vector of objects of type <T>, where the size of the vector is known and can be used for subscri...
const labelListList & pointCells() const
bool checkCellVolumes(const scalarField &vols, const bool report, const bool detailedReport, labelHashSet *setPtr) const
Check for negative cell volumes.
bool hasCellEdges() const
void reset(const label nPoints, const label nInternalFaces, const label nFaces, const label nCells)
Reset this primitiveMesh given the primitive array sizes.
bool isInternalFace(const label faceIndex) const
Return true if given face label is internal to the mesh.
static scalar planarCosAngle_
Threshold where faces are considered coplanar.
static const unsigned edgesPerCell_
Estimated number of edges per cell.
void calcEdgeVectors() const
Calculate edge vectors.
const scalarField & cellVols
bool hasPointFaces() const
virtual bool checkFaceVertices(const bool report=false, labelHashSet *setPtr=nullptr) const
Check uniqueness of face vertices.
const edgeList & edges() const
Return mesh edges. Uses calcEdges.
const vectorField & faceCentres() const
virtual ~primitiveMesh()
Destructor.
virtual bool checkTopology(const bool report=false) const
Check mesh topology for correctness.
bool checkConcaveCells(const vectorField &fAreas, const pointField &fCentres, const bool report, labelHashSet *setPtr) const
Check for concave cells by the planes of faces.
bool checkCommonOrder(const label, const Map< label > &, labelHashSet *) const
Check that shared points are in consecutive order.
void calcFaceCentresAndAreas() const
Calculate face centres and areas.
const vectorField & faceAreas() const
virtual const faceList & faces() const =0
Return faces.
label findNearestCell(const point &location) const
Find the cell with the nearest cell centre to location.
bool checkDuplicateFaces(const label, const Map< label > &, label &nBaffleFaces, labelHashSet *) const
Check if all points on face are shared with another face.
bool hasEdgeCells() const
bool hasPointPoints() const
const labelListList & pointPoints() const
const labelListList & pointFaces() const
virtual const labelList & faceOwner() const =0
Face face-owner addresing.
virtual bool checkCellsZipUp(const bool report=false, labelHashSet *setPtr=nullptr) const
Check cell zip-up.
virtual bool checkUpperTriangular(const bool report=false, labelHashSet *setPtr=nullptr) const
Check face ordering.
virtual bool checkPoints(const bool report=false, labelHashSet *setPtr=nullptr) const
Check for unused points.
virtual bool checkGeometry(const bool report=false) const
Check mesh geometry (& implicitly topology) for correctness.
bool checkFaceFlatness(const pointField &points, const vectorField &faceCentres, const vectorField &faceAreas, const bool report, const scalar warnFlatness, labelHashSet *setPtr) const
Check face warpage.
bool hasCellVolumes() const
virtual bool checkFaceFaces(const bool report=false, labelHashSet *setPtr=nullptr) const
Check face-face connectivity.
static scalar skewThreshold_
Skewness warning threshold.
static scalar nonOrthThreshold_
Non-orthogonality warning threshold in deg.
A class for managing temporary objects.
bool checkClosedBoundary(const vectorField &, const bool, const PackedBoolList &) const
Check boundary for closedness.
static bool calcPointOrder(label &nInternalPoints, labelList &pointMap, const faceList &, const label nInternalFaces, const label nPoints)
Helper function to calculate point ordering. Returns true.
bool hasPointEdges() const
label nInternalEdges() const
Internal edges using 0,1 or 2 boundary points.
const labelListList & cellCells() const
const labelListList & edgeFaces() const
const labelListList & cellPoints() const
const scalarField & cellVolumes() const
bool pointInCellBB(const point &p, label celli, scalar inflationFraction=0) const
Return true if the point in the cell bounding box.
bool hasPointCells() const
bool hasFaceEdges() const