Heat exchanger source model, in which the heat exchanger is defined as a selection of cells. More...

Inheritance diagram for effectivenessHeatExchangerSource:

Collaboration diagram for effectivenessHeatExchangerSource:

[legend]

Public Member Functions
	TypeName ("effectivenessHeatExchangerSource")
	Runtime type information. More...

	effectivenessHeatExchangerSource (const word &name, const word &modelType, const dictionary &dict, const fvMesh &mesh)
	Construct from components. More...

virtual	~effectivenessHeatExchangerSource ()
	Destructor. More...

virtual void	addSup (fvMatrix< scalar > &eqn, const label fieldi)
	Scalar. More...

virtual void	addSup (const volScalarField &rho, fvMatrix< scalar > &eqn, const label fieldi)
	Scalar. More...

virtual bool	read (const dictionary &dict)
	Read dictionary. More...

Public Member Functions inherited from cellSetOption
	TypeName ("cellSetOption")
	Runtime type information. More...

	cellSetOption (const word &name, const word &modelType, const dictionary &dict, const fvMesh &mesh)
	Construct from components. More...

virtual	~cellSetOption ()
	Destructor. More...

scalar	timeStart () const
	Return const access to the time start. More...

scalar	duration () const
	Return const access to the duration. More...

bool	inTimeLimits (const scalar time) const
	Return true if within time limits. More...

const selectionModeType &	selectionMode () const
	Return const access to the cell selection mode. More...

const word &	cellSetName () const
	Return const access to the name of cell set for "cellSet". More...

scalar	V () const
	Return const access to the total cell volume. More...

const labelList &	cells () const
	Return const access to the cell set. More...

scalar &	timeStart ()
	Return access to the time start. More...

scalar &	duration ()
	Return access to the duration. More...

virtual bool	isActive ()
	Is the source active? More...

Public Member Functions inherited from option
	TypeName ("option")
	Runtime type information. More...

	declareRunTimeSelectionTable (autoPtr, option, dictionary,(const word &name, const word &modelType, const dictionary &dict, const fvMesh &mesh),(name, modelType, dict, mesh))

	option (const word &name, const word &modelType, const dictionary &dict, const fvMesh &mesh)
	Construct from components. More...

autoPtr< option >	clone () const
	Return clone. More...

virtual	~option ()
	Destructor. More...

const word &	name () const
	Return const access to the source name. More...

const fvMesh &	mesh () const
	Return const access to the mesh database. More...

const dictionary &	coeffs () const
	Return dictionary. More...

bool	active () const
	Return const access to the source active flag. More...

void	setApplied (const label fieldi)
	Set the applied flag to true for field index fieldi. More...

Switch &	active ()
	Return access to the source active flag. More...

virtual label	applyToField (const word &fieldName) const
	Return index of field name if found in fieldNames list. More...

virtual void	checkApplied () const
	Check that the source has been applied. More...

virtual void	addSup (fvMatrix< vector > &eqn, const label fieldi)

virtual void	addSup (fvMatrix< symmTensor > &eqn, const label fieldi)

virtual void	addSup (fvMatrix< sphericalTensor > &eqn, const label fieldi)

virtual void	addSup (fvMatrix< tensor > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &rho, fvMatrix< vector > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &rho, fvMatrix< symmTensor > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &rho, fvMatrix< sphericalTensor > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &rho, fvMatrix< tensor > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &alpha, const volScalarField &rho, fvMatrix< scalar > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &alpha, const volScalarField &rho, fvMatrix< vector > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &alpha, const volScalarField &rho, fvMatrix< symmTensor > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &alpha, const volScalarField &rho, fvMatrix< sphericalTensor > &eqn, const label fieldi)

virtual void	addSup (const volScalarField &alpha, const volScalarField &rho, fvMatrix< tensor > &eqn, const label fieldi)

virtual void	constrain (fvMatrix< scalar > &eqn, const label fieldi)

virtual void	constrain (fvMatrix< vector > &eqn, const label fieldi)

virtual void	constrain (fvMatrix< sphericalTensor > &eqn, const label fieldi)

virtual void	constrain (fvMatrix< symmTensor > &eqn, const label fieldi)

virtual void	constrain (fvMatrix< tensor > &eqn, const label fieldi)

virtual void	correct (volScalarField &field)

virtual void	correct (volVectorField &field)

virtual void	correct (volSphericalTensorField &field)

virtual void	correct (volSymmTensorField &field)

virtual void	correct (volTensorField &field)

virtual void	writeHeader (Ostream &) const
	Write the source header information. More...

virtual void	writeFooter (Ostream &) const
	Write the source footer information. More...

virtual void	writeData (Ostream &) const
	Write the source properties. More...

Protected Attributes
scalar	secondaryMassFlowRate_
	Secondary flow mass rate [kg/s]. More...

scalar	secondaryInletT_
	Inlet secondary temperature [K]. More...

scalar	primaryInletT_
	Primary air temperature at the heat exchanger inlet [K]. More...

autoPtr< interpolation2DTable< scalar > >	eTable_
	2D look up table efficiency = function of primary and secondary More...

word	UName_
	Name of velocity field; default = U. More...

word	TName_
	Name of temperature field; default = T. More...

word	phiName_
	Name of the flux. More...

word	faceZoneName_
	Name of the faceZone at the heat exchange inlet. More...

label	zoneID_
	Id for the face zone. More...

labelList	faceId_
	Local list of face IDs. More...

labelList	facePatchId_
	Local list of patch ID per face. More...

labelList	faceSign_
	List of +1/-1 representing face flip map (1 use as is, -1 negate) More...

scalar	faceZoneArea_
	Area of the face zone. More...

Protected Attributes inherited from cellSetOption
scalar	timeStart_
	Time start. More...

scalar	duration_
	Duration. More...

selectionModeType	selectionMode_
	Cell selection mode. More...

word	cellSetName_
	Name of cell set for "cellSet" and "cellZone" selectionMode. More...

List< point >	points_
	List of points for "points" selectionMode. More...

labelList	cells_
	Set of cells to apply source to. More...

scalar	V_
	Sum of cell volumes. More...

Protected Attributes inherited from option
const word	name_
	Source name. More...

const word	modelType_
	Model type. More...

const fvMesh &	mesh_
	Reference to the mesh database. More...

dictionary	dict_
	Top level source dictionary. More...

dictionary	coeffs_
	Dictionary containing source coefficients. More...

Switch	active_
	Source active flag. More...

wordList	fieldNames_
	Field names to apply source to - populated by derived models. More...

List< bool >	applied_
	Applied flag list - corresponds to each fieldNames_ entry. More...

Additional Inherited Members
Public Types inherited from cellSetOption
enum	selectionModeType { smPoints, smCellSet, smCellZone, smAll }
	Enumeration for selection mode types. More...

Static Public Member Functions inherited from option
static autoPtr< option >	New (const word &name, const dictionary &dict, const fvMesh &mesh)
	Return a reference to the selected fvOption model. More...

Static Public Attributes inherited from cellSetOption
static const NamedEnum< selectionModeType, 4 >	selectionModeTypeNames_
	Word list of selection mode type names. More...

Protected Member Functions inherited from cellSetOption
void	setSelection (const dictionary &dict)
	Set the cellSet or points selection. More...

void	setCellSet ()
	Set the cell set based on the user input selection mode. More...

Detailed Description

Heat exchanger source model, in which the heat exchanger is defined as a selection of cells.

The total heat exchange source is given by:

$Q_t = e(\phi, \dot{m}_2) (T_2 - T_1) \phi c_p$

where:

	=	total heat source
$e(\phi,\dot{m}_2)$	=	effectivenes table
$\phi$	=	net mass flux entering heat exchanger [kg/s]
$\dot{m}_2$	=	secondary mass flow rate [kg/s]
	=	primary inlet temperature [K]
	=	secondary inlet temperature [K]
	=	specific heat capacity [J/kg/K]

The distribution inside the hear exchanger is given by:

$Q_c = \frac{V_c |U_c| (T_c - T_{ref})}{\sum(V_c |U_c| (T_c - T_{ref}))}$

where:

	=	source for cell
	=	volume of the cell [m3]
	=	local cell velocity [m/s]
	=	local call temperature [K]
$T_{ref}$	=	min or max(T) in cell zone depending on the sign of Q_t [K]

Usage

Example usage:

effectivenessHeatExchangerSource1
{
    type            effectivenessHeatExchangerSource;
    active          yes;

    effectivenessHeatExchangerSourceCoeffs
    {
        selectionMode   cellZone;
        cellZone        porosity;

        secondaryMassFlowRate   1.0;
        secondaryInletT         336;
        primaryInletT           293;
        faceZone                facesZoneInletOriented;
        outOfBounds             clamp;
        fileName                "effTable";
    }
}

The effectiveness table is described in terms of the primary and secondary mass flow rates. For example, the table:

secondary MFR | 0.1 0.2 0.3 —–+—————– 0.02 | A B C primary MFR 0.04 | D E F 0.06 | G H I

Is specified by the following:

( 0.02 ( (0.1 A) (0.2 B) (0.3 C) ), 0.04 ( (0.1 D) (0.2 E) (0.3 F) ), 0.06 ( (0.1 G) (0.2 H) (0.3 I) ) );

Note

the table with name "fileName" should have the same units as the secondary mass flow rate and kg/s for phi
faceZone is the faces at the inlet of the cellzone, it needs to be created with flip map flags. It is used to integrate the net mass flow rate into the heat exchanger

Source files

Definition at line 198 of file effectivenessHeatExchangerSource.H.

Constructor & Destructor Documentation

effectivenessHeatExchangerSource	(	const word &	name,
		const word &	modelType,
		const dictionary &	dict,
		const fvMesh &	mesh
	)

Construct from components.

Definition at line 147 of file effectivenessHeatExchangerSource.C.

References effectivenessHeatExchangerSource::addSup(), dictionaryName::dictName(), Foam::exit(), Foam::FatalError, FatalErrorInFunction, basicThermo::he(), Foam::name(), IOobject::name(), Foam::nl, and Foam::type().

Here is the call graph for this function:

virtual ~effectivenessHeatExchangerSource ( )

inlinevirtual

Destructor.

Definition at line 288 of file effectivenessHeatExchangerSource.H.

References effectivenessHeatExchangerSource::addSup().

Here is the call graph for this function:

Member Function Documentation

TypeName ( "effectivenessHeatExchangerSource" )

Runtime type information.

virtual void addSup	(	fvMatrix< scalar > &	eqn,
		const label	fieldi
	)

inlinevirtual

Scalar.

Reimplemented from option.

Definition at line 298 of file effectivenessHeatExchangerSource.H.

References dict, NotImplemented, effectivenessHeatExchangerSource::read(), and rho.

Referenced by effectivenessHeatExchangerSource::effectivenessHeatExchangerSource(), and effectivenessHeatExchangerSource::~effectivenessHeatExchangerSource().

Here is the call graph for this function:

Here is the caller graph for this function:

void addSup	(	const volScalarField &	rho,
		fvMatrix< scalar > &	eqn,
		const label	fieldi
	)

virtual

Scalar.

Reimplemented from option.

Definition at line 197 of file effectivenessHeatExchangerSource.C.

References GeometricField< Type, PatchField, GeoMesh >::boundaryField(), basicThermo::Cp(), dictionaryName::dictName(), Foam::endl(), forAll, Foam::indent(), Foam::Info, Foam::fvc::interpolate(), Foam::mag(), UPstream::master(), Foam::max(), Foam::min(), Foam::nl, patchi, phi, Foam::reduce(), fvMatrix< Type >::source(), Foam::T(), and U.

Here is the call graph for this function:

bool read ( const dictionary & dict )

virtual

Read dictionary.

Reimplemented from cellSetOption.

Definition at line 297 of file effectivenessHeatExchangerSource.C.

References cellSetOption::read().

Referenced by effectivenessHeatExchangerSource::addSup().

Here is the call graph for this function:

Here is the caller graph for this function:

Member Data Documentation

scalar secondaryMassFlowRate_

protected

Secondary flow mass rate [kg/s].

Definition at line 208 of file effectivenessHeatExchangerSource.H.

scalar secondaryInletT_

protected

Inlet secondary temperature [K].

Definition at line 211 of file effectivenessHeatExchangerSource.H.

scalar primaryInletT_

protected

Primary air temperature at the heat exchanger inlet [K].

Definition at line 214 of file effectivenessHeatExchangerSource.H.

autoPtr<interpolation2DTable<scalar> > eTable_

protected

2D look up table efficiency = function of primary and secondary

mass flow rates [kg/s]

Definition at line 218 of file effectivenessHeatExchangerSource.H.

word UName_

protected

Name of velocity field; default = U.

Definition at line 221 of file effectivenessHeatExchangerSource.H.

word TName_

protected

Name of temperature field; default = T.

Definition at line 224 of file effectivenessHeatExchangerSource.H.

word phiName_

protected

Name of the flux.

Definition at line 227 of file effectivenessHeatExchangerSource.H.

word faceZoneName_

protected

Name of the faceZone at the heat exchange inlet.

Definition at line 230 of file effectivenessHeatExchangerSource.H.

label zoneID_

protected

Id for the face zone.

Definition at line 233 of file effectivenessHeatExchangerSource.H.

labelList faceId_

protected

Local list of face IDs.

Definition at line 236 of file effectivenessHeatExchangerSource.H.

labelList facePatchId_

protected

Local list of patch ID per face.

Definition at line 239 of file effectivenessHeatExchangerSource.H.

labelList faceSign_

protected

List of +1/-1 representing face flip map (1 use as is, -1 negate)

Definition at line 242 of file effectivenessHeatExchangerSource.H.

scalar faceZoneArea_

protected

Area of the face zone.

Definition at line 245 of file effectivenessHeatExchangerSource.H.

The documentation for this class was generated from the following files:

src/fvOptions/sources/derived/effectivenessHeatExchangerSource/effectivenessHeatExchangerSource.H
src/fvOptions/sources/derived/effectivenessHeatExchangerSource/effectivenessHeatExchangerSource.C

Public Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation