readKivaGrid.H

Go to the documentation of this file.

ifstream kivaFile(kivaFileName.c_str());
 
if (!kivaFile.good())
{
    FatalErrorInFunction
        << "Cannot open file " << kivaFileName
        << exit(FatalError);
}
 
Info << "Reading kiva grid from file " << kivaFileName << endl;
 
 
char title[120];
kivaFile.getline(title, 120, '\n');
 
label nPoints, nCells, nRegs;
kivaFile >> nCells >> nPoints >> nRegs;
 
pointField points(nPoints);
label i4;
labelList idface(nPoints), fv(nPoints);
 
for (label i=0; i<nPoints; i++)
{
    scalar ffv;
    kivaFile
        >> i4
        >> points[i].x() >> points[i].y() >> points[i].z()
        >> ffv;
 
    if (kivaVersion == kiva3v)
    {
        kivaFile >> idface[i];
    }
 
    // Convert from KIVA cgs units to SI
    points[i] *= 0.01;
 
    fv[i] = label(ffv);
}
 
labelList i1tab(nPoints), i3tab(nPoints), i8tab(nPoints), idreg(nPoints),
      f(nPoints), bcl(nPoints), bcf(nPoints), bcb(nPoints);
 
for (label i=0; i<nPoints; i++)
{
    label i1, i3, i8;
    scalar ff, fbcl, fbcf, fbcb;
 
    kivaFile
        >> i1 >> i3 >> i4 >> i8
        >> ff >> fbcl >> fbcf >> fbcb
        >> idreg[i];
 
    // Correct indices to start from 0
    i1tab[i] = i1 - 1;
    i3tab[i] = i3 - 1;
    i8tab[i] = i8 - 1;
 
    // Convert scalar indices into hexLabels
    f[i] = label(ff);
    bcl[i] = label(fbcl);
    bcf[i] = label(fbcf);
    bcb[i] = label(fbcb);
}
 
 
label mTable;
kivaFile >> mTable;
 
if (mTable == 0)
{
    FatalErrorInFunction
        << "mTable == 0. This is not supported."
           " kivaToFoam needs complete neighbour information"
        << exit(FatalError);
}
 
 
labelList imtab(nPoints), jmtab(nPoints), kmtab(nPoints);
 
for (label i=0; i<nPoints; i++)
{
    label im, jm, km;
    kivaFile >> i4 >> im >> jm >> km;
 
    // Correct indices to start from 0
    imtab[i] = im - 1;
    jmtab[i] = jm - 1;
    kmtab[i] = km - 1;
}
 
Info << "Finished reading KIVA file" << endl;
 
cellShapeList cellShapes(nPoints);
 
labelList cellZoning(nPoints, -1);
 
const cellModel& hex = *(cellModeller::lookup("hex"));
labelList hexLabels(8);
label activeCells = 0;
 
// Create and set the collocated point collapse map
labelList pointMap(nPoints);
 
forAll(pointMap, i)
{
    pointMap[i] = i;
}
 
// Initialise all cells to hex and search and set map for collocated points
for (label i=0; i<nPoints; i++)
{
    if (f[i] > 0.0)
    {
        hexLabels[0] = i;
        hexLabels[1] = i1tab[i];
        hexLabels[2] = i3tab[i1tab[i]];
        hexLabels[3] = i3tab[i];
        hexLabels[4] = i8tab[i];
        hexLabels[5] = i1tab[i8tab[i]];
        hexLabels[6] = i3tab[i1tab[i8tab[i]]];
        hexLabels[7] = i3tab[i8tab[i]];
 
        cellShapes[activeCells] = cellShape(hex, hexLabels);
 
        edgeList edges = cellShapes[activeCells].edges();
 
        forAll(edges, ei)
        {
            if (edges[ei].mag(points) < small)
            {
                label start = pointMap[edges[ei].start()];
                while (start != pointMap[start])
                {
                    start = pointMap[start];
                }
 
                label end = pointMap[edges[ei].end()];
                while (end != pointMap[end])
                {
                    end = pointMap[end];
                }
 
                label minLabel = min(start, end);
 
                pointMap[start] = pointMap[end] = minLabel;
            }
        }
 
        // Grab the cell zoning info
        cellZoning[activeCells] = idreg[i];
 
        activeCells++;
    }
}
 
// Contract list of cells to the active ones
cellShapes.setSize(activeCells);
cellZoning.setSize(activeCells);
 
// Map collocated points to refer to the same point and collapse cell shape
// to the corresponding hex-degenerate.
forAll(cellShapes, celli)
{
    cellShape& cs = cellShapes[celli];
 
    forAll(cs, i)
    {
        cs[i] = pointMap[cs[i]];
    }
 
    cs.collapse();
}
 
label bcIDs[11] = {-1, 0, 2, 4, -1, 5, -1, 6, 7, 8, 9};
 
const label nBCs = 12;
 
const word* kivaPatchTypes[nBCs] =
{
    &wallPolyPatch::typeName,
    &wallPolyPatch::typeName,
    &wallPolyPatch::typeName,
    &wallPolyPatch::typeName,
    &symmetryPolyPatch::typeName,
    &wedgePolyPatch::typeName,
    &polyPatch::typeName,
    &polyPatch::typeName,
    &polyPatch::typeName,
    &polyPatch::typeName,
    &symmetryPolyPatch::typeName,
    &mergedCyclicPolyPatch::typeName
};
 
enum patchTypeNames
{
    PISTON,
    VALVE,
    LINER,
    CYLINDERHEAD,
    AXIS,
    WEDGE,
    INFLOW,
    OUTFLOW,
    PRESIN,
    PRESOUT,
    SYMMETRYPLANE,
    CYCLIC
};
 
const char* kivaPatchNames[nBCs] =
{
    "piston",
    "valve",
    "liner",
    "cylinderHead",
    "axis",
    "wedge",
    "inflow",
    "outflow",
    "presin",
    "presout",
    "symmetryPlane",
    "cyclic"
};
 
 
List<SLList<face>> pFaces[nBCs];
 
face quadFace(4);
face triFace(3);
 
for (label i=0; i<nPoints; i++)
{
    if (f[i] > 0)
    {
        // left
        label bci = bcl[i];
        if (bci != 4)
        {
            quadFace[0] = i3tab[i];
            quadFace[1] = i;
            quadFace[2] = i8tab[i];
            quadFace[3] = i3tab[i8tab[i]];
 
            #include "checkPatch.H"
        }
 
        // right
        bci = bcl[i1tab[i]];
        if (bci != 4)
        {
            quadFace[0] = i1tab[i];
            quadFace[1] = i3tab[i1tab[i]];
            quadFace[2] = i8tab[i3tab[i1tab[i]]];
            quadFace[3] = i8tab[i1tab[i]];
 
            #include "checkPatch.H"
        }
 
        // front
        bci = bcf[i];
        if (bci != 4)
        {
            quadFace[0] = i;
            quadFace[1] = i1tab[i];
            quadFace[2] = i8tab[i1tab[i]];
            quadFace[3] = i8tab[i];
 
            #include "checkPatch.H"
        }
 
        // derriere (back)
        bci = bcf[i3tab[i]];
        if (bci != 4)
        {
            quadFace[0] = i3tab[i];
            quadFace[1] = i8tab[i3tab[i]];
            quadFace[2] = i8tab[i1tab[i3tab[i]]];
            quadFace[3] = i1tab[i3tab[i]];
 
            #include "checkPatch.H"
        }
 
        // bottom
        bci = bcb[i];
        if (bci != 4)
        {
            quadFace[0] = i;
            quadFace[1] = i3tab[i];
            quadFace[2] = i1tab[i3tab[i]];
            quadFace[3] = i1tab[i];
 
            #include "checkPatch.H"
        }
 
        // top
        bci = bcb[i8tab[i]];
        if (bci != 4)
        {
            quadFace[0] = i8tab[i];
            quadFace[1] = i1tab[i8tab[i]];
            quadFace[2] = i3tab[i1tab[i8tab[i]]];
            quadFace[3] = i3tab[i8tab[i]];
 
            #include "checkPatch.H"
        }
    }
}
 
// Transfer liner faces that are above the minimum cylinder-head z height
// into the cylinder-head region
if
(
    pFaces[LINER].size()
 && pFaces[LINER][0].size()
 && pFaces[CYLINDERHEAD].size()
 && pFaces[CYLINDERHEAD][0].size()
)
{
    scalar minz = great;
 
    forAllConstIter(SLList<face>, pFaces[CYLINDERHEAD][0], iter)
    {
        const face& pf = iter();
 
        forAll(pf, pfi)
        {
            minz = min(minz, points[pf[pfi]].z());
        }
    }
 
    minz += small;
 
    SLList<face> newLinerFaces;
 
    forAllConstIter(SLList<face>, pFaces[LINER][0], iter)
    {
        const face& pf = iter();
 
        scalar minfz = great;
        forAll(pf, pfi)
        {
            minfz = min(minfz, points[pf[pfi]].z());
        }
 
        if (minfz > minz)
        {
            pFaces[CYLINDERHEAD][0].append(pf);
        }
        else
        {
            newLinerFaces.append(pf);
        }
    }
 
    if (pFaces[LINER][0].size() != newLinerFaces.size())
    {
        Info<< "Transferred " << pFaces[LINER][0].size() - newLinerFaces.size()
            << " faces from liner region to cylinder head" << endl;
        pFaces[LINER][0] = newLinerFaces;
    }
 
    SLList<face> newCylinderHeadFaces;
 
    forAllConstIter(SLList<face>, pFaces[CYLINDERHEAD][0], iter)
    {
        const face& pf = iter();
 
        scalar minfz = great;
        forAll(pf, pfi)
        {
            minfz = min(minfz, points[pf[pfi]].z());
        }
 
        if (minfz < zHeadMin)
        {
            pFaces[LINER][0].append(pf);
        }
        else
        {
            newCylinderHeadFaces.append(pf);
        }
    }
 
    if (pFaces[CYLINDERHEAD][0].size() != newCylinderHeadFaces.size())
    {
        Info<< "Transferred faces from cylinder-head region to linder" << endl;
        pFaces[CYLINDERHEAD][0] = newCylinderHeadFaces;
    }
}
 
 
// Count the number of non-zero sized patches
label nPatches = 0;
for (int bci=0; bci<nBCs; bci++)
{
    forAll(pFaces[bci], rgi)
    {
        if (pFaces[bci][rgi].size())
        {
            nPatches++;
        }
    }
}
 
 
// Sort-out the 2D/3D wedge geometry
if (pFaces[WEDGE].size() && pFaces[WEDGE][0].size())
{
    if (pFaces[WEDGE][0].size() == cellShapes.size())
    {
        // Distribute the points to be +/- 2.5deg from the x-z plane
 
        scalar tanTheta = Foam::tan(degToRad(2.5));
 
        SLList<face>::iterator iterf = pFaces[WEDGE][0].begin();
        SLList<face>::iterator iterb = pFaces[WEDGE][1].begin();
        for
        (
            ;
            iterf != pFaces[WEDGE][0].end() && iterb != pFaces[WEDGE][1].end();
            ++iterf, ++iterb
        )
        {
            for (direction d=0; d<4; d++)
            {
                points[iterf()[d]].y() = -tanTheta*points[iterf()[d]].x();
                points[iterb()[d]].y() =  tanTheta*points[iterb()[d]].x();
            }
        }
    }
    else
    {
        pFaces[CYCLIC].setSize(1);
        pFaces[CYCLIC][0] = pFaces[WEDGE][0];
        forAllIter(SLList<face>, pFaces[WEDGE][1], iterb)
        {
            pFaces[CYCLIC][0].append(iterb());
        }
 
        pFaces[WEDGE].clear();
        nPatches--;
    }
}
 
 
// Build the patches
 
faceListList boundary(nPatches);
wordList patchNames(nPatches);
wordList patchTypes(nPatches);
word defaultFacesName = "defaultFaces";
word defaultFacesType = emptyPolyPatch::typeName;
 
label nAddedPatches = 0;
 
for (int bci=0; bci<nBCs; bci++)
{
    forAll(pFaces[bci], rgi)
    {
        if (pFaces[bci][rgi].size())
        {
            patchTypes[nAddedPatches] = *kivaPatchTypes[bci];
 
            patchNames[nAddedPatches] = kivaPatchNames[bci];
 
            if (pFaces[bci].size() > 1)
            {
                patchNames[nAddedPatches] += name(rgi+1);
            }
 
            boundary[nAddedPatches] = pFaces[bci][rgi];
            nAddedPatches++;
        }
    }
}
 
 
// Remove unused points and update cell and face labels accordingly
 
labelList pointLabels(nPoints, -1);
 
// Scan cells for used points
forAll(cellShapes, celli)
{
    forAll(cellShapes[celli], i)
    {
        pointLabels[cellShapes[celli][i]] = 1;
    }
}
 
// Create addressing for used points and pack points array
label newPointi = 0;
forAll(pointLabels, pointi)
{
    if (pointLabels[pointi] != -1)
    {
        pointLabels[pointi] = newPointi;
        points[newPointi++] = points[pointi];
    }
}
points.setSize(newPointi);
 
// Reset cell point labels
forAll(cellShapes, celli)
{
    cellShape& cs = cellShapes[celli];
 
    forAll(cs, i)
    {
        cs[i] = pointLabels[cs[i]];
    }
}
 
// Reset boundary-face point labels
forAll(boundary, patchi)
{
    forAll(boundary[patchi], facei)
    {
        face& f = boundary[patchi][facei];
 
        forAll(f, i)
        {
            f[i] = pointLabels[f[i]];
        }
    }
}
 
PtrList<dictionary> patchDicts;
preservePatchTypes
(
    runTime,
    runTime.constant(),
    polyMesh::meshSubDir,
    patchNames,
    patchDicts,
    defaultFacesName,
    defaultFacesType
);
// Add information to dictionary
forAll(patchNames, patchi)
{
    if (!patchDicts.set(patchi))
    {
        patchDicts.set(patchi, new dictionary());
    }
    // Add but not overwrite
    patchDicts[patchi].add("type", patchTypes[patchi], false);
}
 
// Build the mesh and write it out
polyMesh pShapeMesh
(
    IOobject
    (
        polyMesh::defaultRegion,
        runTime.constant(),
        runTime
    ),
    move(points),
    cellShapes,
    boundary,
    patchNames,
    patchDicts,
    defaultFacesName,
    defaultFacesType
);
 
// Un-merge any merged cyclics
polyMeshUnMergeCyclics(pShapeMesh);
 
Info << "Writing polyMesh" << endl;
pShapeMesh.write();
 
fileName czPath
(
    runTime.path()/runTime.constant()/polyMesh::defaultRegion/"cellZoning"
);
Info << "Writing cell zoning info to file: " << czPath << endl;
OFstream cz(czPath);
 
cz << cellZoning << endl;