XiFoam.C
Go to the documentation of this file.
1 /*---------------------------------------------------------------------------*\
2  ========= |
3  \\ / F ield | OpenFOAM: The Open Source CFD Toolbox
4  \\ / O peration | Website: https://openfoam.org
5  \\ / A nd | Copyright (C) 2011-2018 OpenFOAM Foundation
6  \\/ M anipulation |
7 -------------------------------------------------------------------------------
8 License
9  This file is part of OpenFOAM.
10 
11  OpenFOAM is free software: you can redistribute it and/or modify it
12  under the terms of the GNU General Public License as published by
13  the Free Software Foundation, either version 3 of the License, or
14  (at your option) any later version.
15 
16  OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
17  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
18  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
19  for more details.
20 
21  You should have received a copy of the GNU General Public License
22  along with OpenFOAM. If not, see <http://www.gnu.org/licenses/>.
23 
24 Application
25  XiFoam
26 
27 Description
28  Solver for compressible premixed/partially-premixed combustion with
29  turbulence modelling.
30 
31  Combusting RANS code using the b-Xi two-equation model.
32  Xi may be obtained by either the solution of the Xi transport
33  equation or from an algebraic exression. Both approaches are
34  based on Gulder's flame speed correlation which has been shown
35  to be appropriate by comparison with the results from the
36  spectral model.
37 
38  Strain effects are encorporated directly into the Xi equation
39  but not in the algebraic approximation. Further work need to be
40  done on this issue, particularly regarding the enhanced removal rate
41  caused by flame compression. Analysis using results of the spectral
42  model will be required.
43 
44  For cases involving very lean Propane flames or other flames which are
45  very strain-sensitive, a transport equation for the laminar flame
46  speed is present. This equation is derived using heuristic arguments
47  involving the strain time scale and the strain-rate at extinction.
48  the transport velocity is the same as that for the Xi equation.
49 
50 \*---------------------------------------------------------------------------*/
51 
52 #include "fvCFD.H"
53 #include "psiuReactionThermo.H"
55 #include "laminarFlameSpeed.H"
56 #include "ignition.H"
57 #include "Switch.H"
58 #include "pimpleControl.H"
59 #include "fvOptions.H"
60 
61 // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
62 
63 int main(int argc, char *argv[])
64 {
65  #include "postProcess.H"
66 
67  #include "setRootCaseLists.H"
68  #include "createTime.H"
69  #include "createMesh.H"
70  #include "createControl.H"
71  #include "readCombustionProperties.H"
72  #include "createFields.H"
73  #include "createFieldRefs.H"
74  #include "initContinuityErrs.H"
75  #include "createTimeControls.H"
76  #include "compressibleCourantNo.H"
77  #include "setInitialDeltaT.H"
78 
79  turbulence->validate();
80 
81  // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
82 
83  Info<< "\nStarting time loop\n" << endl;
84 
85  while (runTime.run())
86  {
87  #include "readTimeControls.H"
88  #include "compressibleCourantNo.H"
89  #include "setDeltaT.H"
90 
91  runTime++;
92  Info<< "Time = " << runTime.timeName() << nl << endl;
93 
94  #include "rhoEqn.H"
95 
96  // --- Pressure-velocity PIMPLE corrector loop
97  while (pimple.loop())
98  {
99  #include "UEqn.H"
100 
101  #include "ftEqn.H"
102  #include "bEqn.H"
103  #include "EauEqn.H"
104  #include "EaEqn.H"
105 
106  if (!ign.ignited())
107  {
108  thermo.heu() == thermo.he();
109  }
110 
111  // --- Pressure corrector loop
112  while (pimple.correct())
113  {
114  #include "pEqn.H"
115  }
116 
117  if (pimple.turbCorr())
118  {
119  turbulence->correct();
120  }
121  }
122 
123  rho = thermo.rho();
124 
125  runTime.write();
126 
127  Info<< "ExecutionTime = " << runTime.elapsedCpuTime() << " s"
128  << " ClockTime = " << runTime.elapsedClockTime() << " s"
129  << nl << endl;
130  }
131 
132  Info<< "End\n" << endl;
133 
134  return 0;
135 }
136 
137 
138 // ************************************************************************* //
pimpleNoLoopControl & pimple
engineTime & runTime
Ostream & endl(Ostream &os)
Add newline and flush stream.
Definition: Ostream.H:256
Read the control parameters used by setDeltaT.
rhoReactionThermo & thermo
Definition: createFields.H:28
static const char nl
Definition: Ostream.H:265
Info<< "Reading field U\"<< endl;volVectorField U(IOobject("U", runTime.timeName(), mesh, IOobject::MUST_READ, IOobject::AUTO_WRITE), mesh);volScalarField rho(IOobject("rho", runTime.timeName(), mesh, IOobject::NO_READ, IOobject::AUTO_WRITE), thermo.rho());volVectorField rhoU(IOobject("rhoU", runTime.timeName(), mesh, IOobject::NO_READ, IOobject::NO_WRITE), rho *U);volScalarField rhoE(IOobject("rhoE", runTime.timeName(), mesh, IOobject::NO_READ, IOobject::NO_WRITE), rho *(e+0.5 *magSqr(U)));surfaceScalarField pos(IOobject("pos", runTime.timeName(), mesh), mesh, dimensionedScalar("pos", dimless, 1.0));surfaceScalarField neg(IOobject("neg", runTime.timeName(), mesh), mesh, dimensionedScalar("neg", dimless, -1.0));surfaceScalarField phi("phi", fvc::flux(rhoU));Info<< "Creating turbulence model\"<< endl;autoPtr< compressible::turbulenceModel > turbulence(compressible::turbulenceModel::New(rho, U, phi, thermo))
Definition: createFields.H:94
messageStream Info
Execute application functionObjects to post-process existing results.
Read the control parameters used by setDeltaT.