|
class | advectiveFvPatchField< Type > |
| This boundary condition provides an advective outflow condition, based on solving DDt(psi, U) = 0 at the boundary. More...
|
|
class | fanPressureFvPatchScalarField |
| This boundary condition can be applied to assign either a pressure inlet or outlet total pressure condition for a fan. More...
|
|
class | fixedNormalInletOutletVelocityFvPatchVectorField |
| This velocity inlet/outlet boundary condition combines a fixed normal component obtained from the "normalVelocity" patchField supplied with a fixed or zero-gradiented tangential component depending on the direction of the flow and the setting of "fixTangentialInflow": More...
|
|
class | fluxCorrectedVelocityFvPatchVectorField |
| This boundary condition provides a velocity outlet boundary condition for patches where the pressure is specified. The outflow velocity is obtained by "zeroGradient" and then corrected from the flux: More...
|
|
class | freestreamFvPatchField< Type > |
| This boundary condition provides a free-stream condition. It is a 'mixed' condition derived from the inletOutlet condition, whereby the mode of operation switches between fixed (free stream) value and zero gradient based on the sign of the flux. More...
|
|
class | freestreamPressureFvPatchScalarField |
| This boundary condition provides a free-stream condition for pressure. It is a zero-gradient condition that constrains the flux across the patch based on the free-stream velocity. More...
|
|
class | inletOutletFvPatchField< Type > |
| This boundary condition provides a generic outflow condition, with specified inflow for the case of return flow. More...
|
|
class | inletOutletTotalTemperatureFvPatchScalarField |
| This boundary condition provides an outflow condition for total temperature for use with supersonic cases, where a user-specified value is applied in the case of reverse flow. More...
|
|
class | outletPhaseMeanVelocityFvPatchVectorField |
| This boundary condition adjusts the velocity for the given phase to achieve the specified mean thus causing the phase-fraction to adjust according to the mass flow rate. More...
|
|
class | pressureDirectedInletOutletVelocityFvPatchVectorField |
| This velocity inlet/outlet boundary condition is applied to pressure boundaries where the pressure is specified. A zero-gradient condtion is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with the specified inlet direction. More...
|
|
class | pressureInletOutletParSlipVelocityFvPatchVectorField |
| This velocity inlet/outlet boundary condition for pressure boundary where the pressure is specified. A zero-gradient is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with the specified inlet direction. More...
|
|
class | pressureInletOutletVelocityFvPatchVectorField |
| This velocity inlet/outlet boundary condition is applied to pressure boundaries where the pressure is specified. A zero-gradient condition is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the patch-face normal component of the internal-cell value. More...
|
|
class | pressureNormalInletOutletVelocityFvPatchVectorField |
| This velocity inlet/outlet boundary condition is applied to patches where the pressure is specified. A zero-gradient condition is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with a direction normal to the patch faces. More...
|
|
class | rotatingPressureInletOutletVelocityFvPatchVectorField |
| This velocity inlet/outlet boundary condition is applied to patches in a rotating frame where the pressure is specified. A zero-gradient is applied for outflow (as defined by the flux); for inflow, the velocity is obtained from the flux with a direction normal to the patch faces. More...
|
|
class | rotatingTotalPressureFvPatchScalarField |
| This boundary condition provides a total pressure condition for patches in a rotating frame. More...
|
|
class | supersonicFreestreamFvPatchVectorField |
| This boundary condition provides a supersonic free-stream condition. More...
|
|
class | totalPressureFvPatchScalarField |
| This boundary condition provides a total pressure condition. Four variants are possible: More...
|
|
class | totalTemperatureFvPatchScalarField |
| This boundary condition provides a total temperature condition. More...
|
|
class | uniformInletOutletFvPatchField< Type > |
| Variant of inletOutlet boundary condition with uniform inletValue. More...
|
|
class | uniformTotalPressureFvPatchScalarField |
| This boundary condition provides a time-varying form of the uniform total pressure boundary condition Foam::totalPressureFvPatchField. More...
|
|
class | waveTransmissiveFvPatchField< Type > |
| This boundary condition provides a wave transmissive outflow condition, based onsolving DDt(psi, U) = 0 at the boundary. More...
|
|