cvControls.H

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     | Website:  https://openfoam.org
    \\  /    A nd           | Copyright (C) 2012-2020 OpenFOAM Foundation
     \\/     M anipulation  |
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.

    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.

    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.

Class
    Foam::cvControls

Description
    Controls for the conformalVoronoiMesh mesh generator

SourceFiles
    cvControls.C

\*---------------------------------------------------------------------------*/

#ifndef cvControls_H
#define cvControls_H

#include "dictionary.H"
#include "Switch.H"
#include "vector.H"

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

namespace Foam
{

// Forward declaration of classes
class conformalVoronoiMesh;

/*---------------------------------------------------------------------------*\
                         Class cvControls Declaration
\*---------------------------------------------------------------------------*/

class cvControls
{
    // Private Data

        //- Reference to the foamyHexMeshDict
        const dictionary& foamyHexMeshDict_;

        // Surface conformation controls

            //- Point pair spacing coefficient - fraction of the local target
            //  cell size
            scalar pointPairDistanceCoeff_;

            //- Distance along feature edge to place mixed feature point
            //  conformation groups - to be multiple of pointPairDistanceCoeff_.
            scalar mixedFeaturePointPPDistanceCoeff_;

            //- Distance to a feature point within which surface and edge
            //  conformation points are excluded - fraction of the local target
            //  cell size
            scalar featurePointExclusionDistanceCoeff_;

            //- Distance to an existing feature edge conformation location
            //  within which other edge conformation location are excluded -
            //  fraction of the local target cell size
            scalar featureEdgeExclusionDistanceCoeff_;


            //- Surface search distance coefficient - fraction of the local
            //  target cell size
            scalar surfaceSearchDistanceCoeff_;

            //- Maximum allowable protrusion through the surface before
            //  conformation points are added - fraction of the local target
            //  cell size
            scalar maxSurfaceProtrusionCoeff_;

            //- Maximum quadrant angle allowed at a concave edge before
            //  additional "mitering" lines are added
            scalar maxQuadAngle_;

            //- Now often to rebuild the surface conformation
            label surfaceConformationRebuildFrequency_;

            // Controls for feature point conformation

                //-
                Switch guardFeaturePoints_;

                //-
                Switch edgeAiming_;

                //-
                Switch snapFeaturePoints_;

                //-
                Switch circulateEdges_;

                //- Switch for using specialised feature points
                Switch specialiseFeaturePoints_;


            // Controls for coarse surface conformation

                //- Distance to an existing surface conformation point location
                //  within which other surface point locations are excluded
                //  - fraction of the local target cell size
                scalar surfacePtExclusionDistanceCoeff_;

                //- Distance to search for feature edges near to
                //  surface protrusions - fraction of the local target
                //  cell size.
                scalar edgeSearchDistCoeffSqr_;

                //- Proximity to a feature edge where a surface hit is
                //  not created, only the edge conformation is created
                //  - fraction of the local target cell size.
                scalar surfacePtReplaceDistCoeffSqr_;

                //- Maximum allowed number surface conformation iterations.
                label maxConformationIterations_;

                //- Termination criterion for conformation iterations.
                //  When the number of surface protrusions drops below this
                //  ratio of the initial number of protrusions.
                scalar iterationToInitialHitRatioLimit_;


    // Motion control controls


        // Cell size criteria

            //- Default cell size
            scalar defaultCellSize_;

            //- Minimum cell size
            scalar minimumCellSize_;


        //- Switch to control the output of obj files for debug
        Switch objOutput_;

        //- Switch to control the reporting of detailed timeChecks
        Switch timeChecks_;

        //- Switch to control the reporting of detailed vertex information
        Switch printVertexInfo_;

        //- Allowed relative load unbalance
        scalar maxLoadUnbalance_;

        //- Cosine of angle of alignment with required direction within which a
        //  face will be accepted for rotation
        scalar cosAlignmentAcceptanceAngle_;


        // Point insertion criteria

            //- Length between Delaunay vertices above which a new Dv should be
            //  inserted - fraction of the local target cell size
            scalar insertionDistCoeff_;

            //- Minimum dual face area corresponding to long Delaunay edge where
            //  a new Dv is to be inserted - fraction of the local target cell
            //  size
            scalar faceAreaRatioCoeff_;

            //- Cosine of the angle of alignment with the required direction
            //  within which a long De will be accepted for a new Dv insertion
            scalar cosInsertionAcceptanceAngle_;


        // Point removal criteria

            //- Length between Delaunay vertices below which a Dv should be
            //  removed - fraction of the local target cell size
            scalar removalDistCoeff_;


    // polyMesh filtering controls

        //- Activates the mesh edge filtering. On by default.
        Switch filterEdges_;

        //- Activates the mesh face filtering. Off by default.
        Switch filterFaces_;

        //- Write tet mesh at output time (it always writes the Voronoi)
        Switch writeTetDualMesh_;

        Switch writeCellShapeControlMesh_;

        Switch writeBackgroundMeshDecomposition_;


public:

   // Constructors

        //- Construct from references to conformalVoronoiMesh and dictionary
        cvControls
        (
            const dictionary& foamyHexMeshDict
        );

        //- Disallow default bitwise copy construction
        cvControls(const cvControls&) = delete;


    //- Destructor
    ~cvControls();


    // Member Functions

        // Access

            //- Return the foamyHexMeshDict
            inline const dictionary& foamyHexMeshDict() const;

            //- Return the pointPairDistanceCoeff
            inline scalar pointPairDistanceCoeff() const;

            //- Return the mixedFeaturePointPPDistanceCoeff
            inline scalar mixedFeaturePointPPDistanceCoeff() const;

            //- Return the featurePointExclusionDistanceCoeff
            inline scalar featurePointExclusionDistanceCoeff() const;

            //- Return the featureEdgeExclusionDistanceCoeff
            inline scalar featureEdgeExclusionDistanceCoeff() const;

            //-
            inline Switch guardFeaturePoints() const;

            //-
            inline Switch edgeAiming() const;

            //-
            inline Switch snapFeaturePoints() const;

            //-
            inline Switch circulateEdges() const;

            //- Return the surfacePtExclusionDistanceCoeff
            inline scalar surfacePtExclusionDistanceCoeff() const;

            //- Return whether to use specialised feature points
            inline Switch specialiseFeaturePoints() const;

            //- Return the surfaceSearchDistanceCoeff
            inline scalar surfaceSearchDistanceCoeff() const;

            //- Return the maxSurfaceProtrusionCoeff
            inline scalar maxSurfaceProtrusionCoeff() const;

            //- Return the maxQuadAngle
            inline scalar maxQuadAngle() const;

            //- Return the surfaceConformationRebuildFrequency
            inline label surfaceConformationRebuildFrequency() const;

            //- Return the edgeSearchDistCoeffSqr for conformation.
            scalar edgeSearchDistCoeffSqr() const;

            //- Return the surfacePtReplaceDistCoeffSqr for conformation.
            scalar surfacePtReplaceDistCoeffSqr() const;

            //- Return the maxConformationIterations
            label maxConformationIterations() const;

            //- Return the iterationToInitialHitRatioLimit
            scalar iterationToInitialHitRatioLimit() const;

            //- Return the defaultCellSize
            inline scalar defaultCellSize() const;

            //- Return the minimumCellSize
            inline scalar minimumCellSize() const;

            //- Return the objOutput Switch
            inline Switch objOutput() const;

            //- Return the timeChecks Switch
            inline Switch timeChecks() const;

            //- Return the printVertexInfo Switch
            inline Switch printVertexInfo() const;

            //- Return the maxLoadUnbalance
            inline scalar maxLoadUnbalance() const;

            //- Return the cosAlignmentAcceptanceAngle
            inline scalar cosAlignmentAcceptanceAngle() const;

            //- Return the aspectRatio
            inline scalar aspectRatio() const;

            //- Return the aspectRatioDirection
            inline const vector& aspectRatioDirection() const;

            //- Return the insertionDistCoeff
            inline scalar insertionDistCoeff() const;

            //- Return the faceAreaRatioCoeff
            inline scalar faceAreaRatioCoeff() const;

            //- Return the cosInsertionAcceptanceAngle
            inline scalar cosInsertionAcceptanceAngle() const;

            //- Return removalDistCoeff
            inline scalar removalDistCoeff() const;

            //- Filter edges at output time
            inline Switch filterEdges() const;

            //- Filter faces at output time
            inline Switch filterFaces() const;

            //- Write tetMesh at output time
            inline Switch writeTetDualMesh() const;

            //- Write cellShapeControlMesh at output time
            inline Switch writeCellShapeControlMesh() const;

            //- Write backgroundMeshDecomposition at output time
            inline Switch writeBackgroundMeshDecomposition() const;


    // Member Operators

        //- Disallow default bitwise assignment
        void operator=(const cvControls&) = delete;
};


// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

} // End namespace Foam

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

#include "cvControlsI.H"

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

#endif

// ************************************************************************* //