A surface mesh consisting of general polygon faces. More...
Public Types | |
| enum | readUpdateState { UNCHANGED, POINTS_MOVED, TOPO_CHANGE, TOPO_PATCH_CHANGE } |
| Enumeration defining the state of the mesh after a read update. More... | |
| typedef surfMesh | Mesh |
| typedef bool | BoundaryMesh |
| Placeholder only, but do not remove - it is needed for GeoMesh. More... | |
 Public Types inherited from IOobject | |
| enum | objectState { GOOD, BAD } |
| Enumeration defining the valid states of an IOobject. More... | |
| enum | readOption { MUST_READ, MUST_READ_IF_MODIFIED, READ_IF_PRESENT, NO_READ } |
| Enumeration defining the read options. More... | |
| enum | writeOption { AUTO_WRITE = 0, NO_WRITE = 1 } |
| Enumeration defining the write options. More... | |
| enum | fileCheckTypes { timeStamp, timeStampMaster, inotify, inotifyMaster } |
| Enumeration defining the file checking options. More... | |
| Public Types inherited from HashTable< regIOobject *> | |
| typedef regIOobject * | value_type |
| Type of values the HashTable contains. More... | |
| typedef regIOobject * & | reference |
| Type that can be used for storing into HashTable::value_type. More... | |
| typedef const regIOobject * & | const_reference |
| Type that can be used for storing into constant. More... | |
| typedef label | size_type |
| The type that can represent the size of a HashTable. More... | |
| Public Types inherited from PrimitivePatch<::Foam::UList< face >, ::Foam::SubField< point > > | |
| enum | surfaceTopo |
| Enumeration defining the surface type. Used in check routines. More... | |
| typedef ::Foam::UList< face > | FaceListType |
| typedef std::remove_reference< ::Foam::UList< face > >::type::value_type | FaceType |
| typedef ::Foam::SubField< point > | PointFieldType |
| typedef std::remove_reference< ::Foam::SubField< point > >::type::value_type | PointType |
| Public Types inherited from UList< face > | |
| typedef face | value_type |
| Type of values the UList contains. More... | |
| typedef face & | reference |
| Type that can be used for storing into. More... | |
| typedef const face & | const_reference |
| Type that can be used for storing into. More... | |
| typedef label | difference_type |
| The type that can represent the difference between any two. More... | |
| typedef label | size_type |
| The type that can represent the size of a UList. More... | |
| typedef face * | iterator |
| Random access iterator for traversing UList. More... | |
| typedef const face * | const_iterator |
| Random access iterator for traversing UList. More... | |
| typedef std::reverse_iterator< iterator > | reverse_iterator |
| Reverse iterator for reverse traversal of UList. More... | |
| typedef std::reverse_iterator< const_iterator > | const_reverse_iterator |
| Reverse iterator for reverse traversal of constant UList. More... | |
Public Member Functions | |
| TypeName ("surfMesh") | |
| Runtime type information. More... | |
| surfMesh (const IOobject &, const word &surfName="") | |
| Construct from IOobject, with alternative surface name. More... | |
| surfMesh (const IOobject &, pointField &&, faceList &&, const word &surfName="") | |
| Construct by transferring components (points, faces) without zones. More... | |
| surfMesh (const IOobject &, MeshedSurface< face > &&surf, const word &surfName="") | |
| Construct copy/move from MeshedSurface. More... | |
| surfMesh (const surfMesh &) | |
| Disallow default bitwise copy construction. More... | |
| virtual | ~surfMesh () |
| Destructor. More... | |
| fileName | meshDir () const |
| Return the local mesh directory (dbDir()/meshSubDir) More... | |
| const fileName & | pointsInstance () const |
| Return the current instance directory for points. More... | |
| const fileName & | facesInstance () const |
| Return the current instance directory for faces. More... | |
| void | setInstance (const fileName &) |
| Set the instance for mesh files. More... | |
| virtual label | nPoints () const |
| Return the number of raw points. More... | |
| virtual label | nFaces () const |
| Return the number of raw faces. More... | |
| virtual label | size () const |
| Return number of faces. More... | |
| virtual const pointField & | points () const |
| Return points. More... | |
| virtual const faceList & | faces () const |
| Return faces. More... | |
| virtual const surfZoneList & | surfZones () const |
| Return surface zones. More... | |
| void | checkZones () |
| Check the surface zone definitions. More... | |
| void | addZones (const List< surfZone > &, const bool validate=true) |
| Add surface zones. More... | |
| virtual readUpdateState | readUpdate () |
| Update the mesh based on the mesh files saved in. More... | |
| void | removeZones () |
| Update the mesh corresponding to given map. More... | |
| void | resetPrimitives (pointField &&points, faceList &&faces, surfZoneList &&zones, const bool validate=true) |
| Reset mesh primitive data. More... | |
| void | transfer (MeshedSurface< face > &) |
| Transfer the contents of the argument and annul the argument. More... | |
| void | write (const fileName &) |
| Write to file. More... | |
| void | clearGeom () |
| Clear geometry. More... | |
| void | clearAddressing () |
| Clear addressing. More... | |
| void | clearOut () |
| Clear all geometry and addressing unnecessary for CFD. More... | |
| void | clearPrimitives () |
| Clear primitive data (points, faces and cells) More... | |
| void | removeFiles (const fileName &instanceDir) const |
| Remove all files from mesh instance. More... | |
| void | removeFiles () const |
| Remove all files from mesh instance() More... | |
| void | operator= (const surfMesh &)=delete |
| Disallow default bitwise assignment. More... | |
| Public Member Functions inherited from surfaceRegistry | |
| TypeName ("surfaceRegistry") | |
| Runtime type information. More... | |
| surfaceRegistry (const objectRegistry &, const word &surfName="") | |
| Construct for the given objectRegistry and named surface. More... | |
| surfaceRegistry (const surfaceRegistry &)=delete | |
| Disallow default bitwise copy construction. More... | |
| virtual | ~surfaceRegistry () |
| Destructor. More... | |
| void | operator= (const surfaceRegistry &)=delete |
| Disallow default bitwise assignment. More... | |
| Public Member Functions inherited from objectRegistry | |
| TypeName ("objectRegistry") | |
| Declare type name for this IOobject. More... | |
| objectRegistry (const Time &db, const label nIoObjects=128) | |
| Construct the time objectRegistry given an initial estimate. More... | |
| objectRegistry (const IOobject &io, const label nIoObjects=128) | |
| Construct a sub-registry given an IObject to describe the registry. More... | |
| objectRegistry (const objectRegistry &) | |
| Disallow default bitwise copy construction. More... | |
| virtual | ~objectRegistry () |
| Destructor. More... | |
| const Time & | time () const |
| Return time. More... | |
| const objectRegistry & | parent () const |
| Return the parent objectRegistry. More... | |
| virtual const fileName & | dbDir () const |
| Local directory path of this objectRegistry relative to the time. More... | |
| fileName | path (const word &instance, const fileName &local="") const |
| Return complete path with alternative instance and local. More... | |
| wordList | names () const |
| Return the list of names of the IOobjects. More... | |
| wordList | sortedNames () const |
| Return the sorted list of names of the IOobjects. More... | |
| wordList | names (const word &className) const |
| Return the list of names of IOobjects of given class name. More... | |
| wordList | sortedNames (const word &className) const |
| Return the sorted list of names of IOobjects of given class name. More... | |
| template<class Type > | |
| wordList | names () const |
| Return the list of names of the IOobjects of given type. More... | |
| template<class Type > | |
| wordList | names (const wordRe &name) const |
| Return the list of objects whose name matches the input regExp. More... | |
| template<class Type > | |
| wordList | names (const wordReList &name) const |
| Return the list of objects whose name matches the input regExp. More... | |
| const objectRegistry & | subRegistry (const word &name, const bool forceCreate=false) const |
| Lookup and return a const sub-objectRegistry. Optionally create. More... | |
| template<class Type > | |
| HashTable< const Type * > | lookupClass (const bool strict=false) const |
| Lookup and return all objects of the given Type. More... | |
| template<class Type > | |
| HashTable< Type * > | lookupClass (const bool strict=false) |
| Lookup and return all objects of the given Type. More... | |
| template<class Type > | |
| bool | foundObject (const word &name) const |
| Is the named Type found? More... | |
| template<class Type > | |
| const Type & | lookupObject (const word &name) const |
| Lookup and return the object of the given Type. More... | |
| template<class Type > | |
| Type & | lookupObjectRef (const word &name) const |
| Lookup and return the object reference of the given Type. More... | |
| label | getEvent () const |
| Return new event number. More... | |
| const objectRegistry & | thisDb () const |
| Return the object registry. More... | |
| virtual void | rename (const word &newName) |
| Rename. More... | |
| bool | checkIn (regIOobject &) const |
| Add an regIOobject to registry. More... | |
| bool | checkOut (regIOobject &) const |
| Remove an regIOobject from registry. More... | |
| void | clear () |
| Remove all regIOobject owned by the registry. More... | |
| void | addTemporaryObject (const word &name) const |
| Add the given name to the set of temporary objects to cache. More... | |
| bool | cacheTemporaryObject (const word &name) const |
| Return true if given name is in the cacheTemporaryObjects set. More... | |
| template<class Object > | |
| bool | cacheTemporaryObject (Object &ob) const |
| Cache the given object. More... | |
| void | resetCacheTemporaryObject (const regIOobject &ob) const |
| Reset the cache state of the given object. More... | |
| bool | checkCacheTemporaryObjects () const |
| Check that all objects in the cacheTemporaryObjects set. More... | |
| virtual bool | modified () const |
| Return true if any of the object's files have been modified. More... | |
| void | readModifiedObjects () |
| Read the objects that have been modified. More... | |
| virtual bool | readIfModified () |
| Read object if modified. More... | |
| virtual bool | writeData (Ostream &) const |
| writeData function required by regIOobject but not used More... | |
| virtual bool | writeObject (IOstream::streamFormat fmt, IOstream::versionNumber ver, IOstream::compressionType cmp, const bool write) const |
| Write the objects. More... | |
| void | operator= (const objectRegistry &)=delete |
| Disallow default bitwise assignment. More... | |
| template<class Type > | |
| Foam::wordList | names () const |
| template<class Type > | |
| Foam::wordList | names (const wordRe &name) const |
| template<class Type > | |
| Foam::wordList | names (const wordReList &patterns) const |
| template<class Type > | |
| Foam::HashTable< const Type * > | lookupClass (const bool strict) const |
| template<class Type > | |
| Foam::HashTable< Type * > | lookupClass (const bool strict) |
| Public Member Functions inherited from regIOobject | |
| TypeName ("regIOobject") | |
| Runtime type information. More... | |
| regIOobject (const IOobject &, const bool isTime=false) | |
| Construct from IOobject. Optional flag for if IOobject is the. More... | |
| regIOobject (const regIOobject &) | |
| Copy constructor. More... | |
| regIOobject (const regIOobject &&) | |
| Move constructor. More... | |
| regIOobject (const regIOobject &, bool registerCopy) | |
| Copy constructor, transferring registry registration to copy. More... | |
| regIOobject (const word &newName, const regIOobject &, bool registerCopy) | |
| Copy constructor with new name, transferring registry registration. More... | |
| regIOobject (const IOobject &, const regIOobject &) | |
| Copy constructor with new IO parameters. More... | |
| virtual | ~regIOobject () |
| Destructor. More... | |
| virtual bool | global () const |
| Return true if object is global, i.e. same for all processors. More... | |
| virtual bool | globalFile () const |
| Return true if object is global, i.e. same for all processors. More... | |
| const fileName & | caseName () const |
| fileName | path () const |
| Return complete path. More... | |
| fileName | objectPath () const |
| Return complete path + object name. More... | |
| fileName | filePath () const |
| Return complete path + object name if the file exists. More... | |
| bool | checkIn () |
| Add object to registry. More... | |
| bool | checkOut () |
| Remove object from registry. More... | |
| void | addWatch () |
| Add file watch on object (if registered and READ_IF_MODIFIED) More... | |
| bool | registered () const |
| Is this object registered with the registry? More... | |
| bool | ownedByRegistry () const |
| Is this object owned by the registry? More... | |
| void | store () |
| Transfer ownership of this object to its registry. More... | |
| void | release () |
| Release ownership of this object from its registry. More... | |
| label | eventNo () const |
| Event number at last update. More... | |
| label & | eventNo () |
| Event number at last update. More... | |
| bool | upToDate (const regIOobject &) const |
| Return true if up-to-date with respect to given object. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| bool | upToDate (const regIOobject &, const regIOobject &, const regIOobject &, const regIOobject &) const |
| Return true if up-to-date with respect to given objects. More... | |
| void | setUpToDate () |
| Set up to date (obviously) More... | |
| bool | headerOk () |
| Read and check header info. More... | |
| Istream & | readStream (const word &, const bool read=true) |
| Return Istream and check object type against that given. More... | |
| void | close () |
| Close Istream. More... | |
| virtual bool | readData (Istream &) |
| Virtual readData function. More... | |
| virtual bool | read () |
| Read object. More... | |
| const labelList & | watchIndices () const |
| Return file-monitoring handles. More... | |
| labelList & | watchIndices () |
| Return file-monitoring handles. More... | |
| virtual bool | write (const bool write=true) const |
| Write using setting from DB. More... | |
| void | operator= (const IOobject &) |
| Public Member Functions inherited from IOobject | |
| TypeName ("IOobject") | |
| Runtime type information. More... | |
| IOobject (const word &name, const fileName &instance, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true) | |
| Construct from name, instance, registry, io options. More... | |
| IOobject (const word &name, const fileName &instance, const fileName &local, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true) | |
| Construct from name, instance, local, registry, io options. More... | |
| IOobject (const fileName &path, const objectRegistry ®istry, readOption r=NO_READ, writeOption w=NO_WRITE, bool registerObject=true) | |
| Construct from path, registry, io options. More... | |
| IOobject (const IOobject &io, const objectRegistry ®istry) | |
| Construct from copy resetting registry. More... | |
| IOobject (const IOobject &io, const word &name) | |
| Construct from copy resetting name. More... | |
| IOobject (const IOobject &io)=default | |
| Copy constructor. More... | |
| autoPtr< IOobject > | clone () const |
| Clone. More... | |
| autoPtr< IOobject > | clone (const objectRegistry ®istry) const |
| Clone resetting registry. More... | |
| virtual | ~IOobject () |
| Destructor. More... | |
| const Time & | time () const |
| Return time. More... | |
| const objectRegistry & | db () const |
| Return the local objectRegistry. More... | |
| const word & | name () const |
| Return name. More... | |
| const word & | headerClassName () const |
| Return name of the class name read from header. More... | |
| word & | headerClassName () |
| Return name of the class name read from header. More... | |
| string & | note () |
| Return non-constant access to the optional note. More... | |
| const string & | note () const |
| Return the optional note. More... | |
| bool & | registerObject () |
| Register object created from this IOobject with registry if true. More... | |
| bool | registerObject () const |
| Register object created from this IOobject with registry if true. More... | |
| readOption | readOpt () const |
| readOption & | readOpt () |
| writeOption | writeOpt () const |
| writeOption & | writeOpt () |
| word | group () const |
| Return group (extension part of name) More... | |
| word | member () const |
| Return member (name without the extension) More... | |
| word | modelName (const char *name) const |
| Return the name of the object within this model. More... | |
| const fileName & | rootPath () const |
| const fileName & | caseName (const bool global) const |
| fileName & | instance () const |
| Return the instance directory, constant, system, <time> etc. More... | |
| void | updateInstance () const |
| If the instance is a time directory update to the current time. More... | |
| const fileName & | local () const |
| fileName | path (const bool global) const |
| Return complete path including the processor sub-directory. More... | |
| fileName | objectPath (const bool global) const |
| Return complete path + object name including the processor. More... | |
| fileName | relativePath () const |
| Return the path relative to the case directory. More... | |
| fileName | relativeObjectPath () const |
| Return complete relativePath + object name. More... | |
| fileName | filePath (const word &typeName, const bool global) const |
| Return complete path + object name if the file exists. More... | |
| bool | readHeader (Istream &) |
| Read header. More... | |
| bool | headerOk () |
| Read header of local object without type-checking. More... | |
| template<class Type > | |
| void | warnNoRereading () const |
| Helper: warn that type does not support re-reading. More... | |
| bool | writeHeader (Ostream &) const |
| Write header. More... | |
| bool | writeHeader (Ostream &, const word &objectType) const |
| Write header. Allow override of type. More... | |
| bool | good () const |
| bool | bad () const |
| InfoProxy< IOobject > | info () const |
| Return info proxy. More... | |
| void | operator= (const IOobject &) |
| template<class Name > | |
| Foam::word | groupName (Name name, const word &group) |
| template<class Name > | |
| Foam::word | modelName (Name name, const word &model) |
| Public Member Functions inherited from HashTable< regIOobject *> | |
| bool | set (const word &, const regIOobject * &newElmt) |
| Assign a new hashedEntry, overwriting existing entries. More... | |
| HashTable (const label size=128) | |
| Construct given initial table size. More... | |
| HashTable (Istream &, const label size=128) | |
| Construct from Istream. More... | |
| HashTable (const HashTable< regIOobject *, word, string::hash > &) | |
| Copy constructor. More... | |
| HashTable (HashTable< regIOobject *, word, string::hash > &&) | |
| Move constructor. More... | |
| HashTable (std::initializer_list< Tuple2< word, regIOobject * >>) | |
| Construct from an initialiser list. More... | |
| ~HashTable () | |
| Destructor. More... | |
| label | capacity () const |
| The size of the underlying table. More... | |
| label | size () const |
| Return number of elements in table. More... | |
| bool | empty () const |
| Return true if the hash table is empty. More... | |
| bool | found (const word &) const |
| Return true if hashedEntry is found in table. More... | |
| iterator | find (const word &) |
| Find and return an iterator set at the hashedEntry. More... | |
| const_iterator | find (const word &) const |
| Find and return an const_iterator set at the hashedEntry. More... | |
| List< word > | toc () const |
| Return the table of contents. More... | |
| List< word > | sortedToc () const |
| Return the table of contents as a sorted list. More... | |
| Ostream & | printInfo (Ostream &) const |
| Print information. More... | |
| bool | insert (const word &, const regIOobject * &newElmt) |
| Insert a new hashedEntry. More... | |
| bool | erase (const iterator &) |
| Erase a hashedEntry specified by given iterator. More... | |
| bool | erase (const word &) |
| Erase a hashedEntry specified by the given key. More... | |
| label | erase (const UList< word > &) |
| Remove entries given by the listed keys from this HashTable. More... | |
| label | erase (const HashTable< AnyType, word, AnyHash > &) |
| Remove entries given by the given keys from this HashTable. More... | |
| Foam::label | erase (const HashTable< AnyType, word, AnyHash > &rhs) |
| void | resize (const label newSize) |
| Resize the hash table for efficiency. More... | |
| void | clear () |
| Clear all entries from table. More... | |
| void | clearStorage () |
| Clear the table entries and the table itself. More... | |
| void | shrink () |
| Shrink the allocated table to approx. twice number of elements. More... | |
| void | transfer (HashTable< regIOobject *, word, string::hash > &) |
| Transfer the contents of the argument table into this table. More... | |
| regIOobject * & | operator[] (const word &) |
| Find and return a hashedEntry. More... | |
| const regIOobject * & | operator[] (const word &) const |
| Find and return a hashedEntry. More... | |
| regIOobject * & | operator() (const word &) |
| Find and return a hashedEntry, create it null if not present. More... | |
| void | operator= (const HashTable< regIOobject *, word, string::hash > &) |
| Assignment operator. More... | |
| void | operator= (HashTable< regIOobject *, word, string::hash > &&) |
| Move assignment operator. More... | |
| void | operator= (std::initializer_list< Tuple2< word, regIOobject * >>) |
| Assignment to an initialiser list. More... | |
| bool | operator== (const HashTable< regIOobject *, word, string::hash > &) const |
| Equality. Hash tables are equal if the keys and values are equal. More... | |
| bool | operator!= (const HashTable< regIOobject *, word, string::hash > &) const |
| The opposite of the equality operation. Takes linear time. More... | |
| iterator | begin () |
| Iterator set to the beginning of the HashTable. More... | |
| const_iterator | begin () const |
| const_iterator set to the beginning of the HashTable More... | |
| const_iterator | cbegin () const |
| const_iterator set to the beginning of the HashTable More... | |
| Public Member Functions inherited from HashTableCore | |
| HashTableCore () | |
| Construct null. More... | |
| ClassName ("HashTable") | |
| Define template name and debug. More... | |
| Public Member Functions inherited from PrimitivePatch<::Foam::UList< face >, ::Foam::SubField< point > > | |
| PrimitivePatch (const ::Foam::UList< face > &faces, const Field< PointType > &points) | |
| Construct from components. More... | |
| PrimitivePatch (::Foam::UList< face > &&faces, Field< PointType > &&points) | |
| Move constructor from components. More... | |
| PrimitivePatch (::Foam::UList< face > &faces, Field< PointType > &points, const bool reuse) | |
| Construct from components, reuse storage. More... | |
| PrimitivePatch (const PrimitivePatch< ::Foam::UList< face >, ::Foam::SubField< point > > &) | |
| Copy constructor. More... | |
| PrimitivePatch (PrimitivePatch< ::Foam::UList< face >, ::Foam::SubField< point > > &&) | |
| Move constructor. More... | |
| autoPtr< PrimitivePatch< ::Foam::UList< face >, ::Foam::SubField< point > > > | clone () const |
| Construct and return a clone. More... | |
| ~PrimitivePatch () | |
| Destructor. More... | |
| const Field< PointType > & | points () const |
| Return reference to global points. More... | |
| label | nPoints () const |
| Return number of points supporting patch faces. More... | |
| label | nEdges () const |
| Return number of edges in patch. More... | |
| const edgeList & | edges () const |
| Return list of edges, address into LOCAL point list. More... | |
| label | nInternalEdges () const |
| Number of internal edges. More... | |
| bool | isInternalEdge (const label edgeI) const |
| Is internal edge? More... | |
| const labelList & | boundaryPoints () const |
| Return list of boundary points,. More... | |
| const labelListList & | faceFaces () const |
| Return face-face addressing. More... | |
| const labelListList & | edgeFaces () const |
| Return edge-face addressing. More... | |
| const labelListList & | faceEdges () const |
| Return face-edge addressing. More... | |
| const labelListList & | pointEdges () const |
| Return point-edge addressing. More... | |
| const labelListList & | pointFaces () const |
| Return point-face addressing. More... | |
| const List< FaceType > & | localFaces () const |
| Return patch faces addressing into local point list. More... | |
| const labelList & | meshPoints () const |
| Return labelList of mesh points in patch. They are constructed. More... | |
| const Map< label > & | meshPointMap () const |
| Mesh point map. Given the global point index find its. More... | |
| const Field< PointType > & | localPoints () const |
| Return pointField of points in patch. More... | |
| const labelList & | localPointOrder () const |
| Return orders the local points for most efficient search. More... | |
| label | whichPoint (const label gp) const |
| Given a global point index, return the local point index. More... | |
| label | whichEdge (const edge &) const |
| Given an edge in local point labels, return its. More... | |
| labelList | meshEdges (const edgeList &allEdges, const labelListList &cellEdges, const labelList &faceCells) const |
| Return labels of patch edges in the global edge list using. More... | |
| labelList | meshEdges (const edgeList &allEdges, const labelListList &pointEdges) const |
| Return labels of patch edges in the global edge list using. More... | |
| const Field< PointType > & | faceCentres () const |
| Return face centres for patch. More... | |
| const Field< PointType > & | faceAreas () const |
| Return face areas for patch. More... | |
| const Field< PointType > & | faceNormals () const |
| Return face normals for patch. More... | |
| const Field< PointType > & | pointNormals () const |
| Return point normals for patch. More... | |
| List< objectHit > | projectPoints (const ToPatch &targetPatch, const Field< PointType > &projectionDirection, const intersection::algorithm=intersection::algorithm::fullRay, const intersection::direction=intersection::direction::vector) const |
| Project vertices of patch onto another patch. More... | |
| Foam::List< Foam::objectHit > | projectPoints (const ToPatch &targetPatch, const Field< PointType > &projectionDirection, const intersection::algorithm alg, const intersection::direction dir) const |
| List< objectHit > | projectFaceCentres (const ToPatch &targetPatch, const Field< PointType > &projectionDirection, const intersection::algorithm=intersection::algorithm::fullRay, const intersection::direction=intersection::direction::vector) const |
| Project vertices of patch onto another patch. More... | |
| Foam::List< Foam::objectHit > | projectFaceCentres (const ToPatch &targetPatch, const Field< PointType > &projectionDirection, const intersection::algorithm alg, const intersection::direction dir) const |
| const labelListList & | edgeLoops () const |
| Return list of closed loops of boundary vertices. More... | |
| surfaceTopo | surfaceType () const |
| Calculate surface type formed by patch. More... | |
| bool | checkTopology (const bool report=false, labelHashSet *setPtr=nullptr) const |
| Check surface formed by patch for manifoldness (see above). More... | |
| bool | checkPointManifold (const bool report=false, labelHashSet *setPtr=nullptr) const |
| Checks primitivePatch for faces sharing point but not edge. More... | |
| void | clearOut () |
| void | clearGeom () |
| void | clearTopology () |
| void | clearPatchMeshAddr () |
| void | operator= (const PrimitivePatch< ::Foam::UList< face >, ::Foam::SubField< point > > &) |
| Assignment operator. More... | |
| void | operator= (PrimitivePatch< ::Foam::UList< face >, ::Foam::SubField< point > > &&) |
| Move assignment operator. More... | |
| Public Member Functions inherited from UList< face > | |
| void | operator= (const face &) |
| Assignment of all entries to the given value. More... | |
| void | operator= (const zero) |
| Assignment of all entries to zero. More... | |
| UList () | |
| Null constructor. More... | |
| UList (face *__restrict__ v, label size) | |
| Construct from components. More... | |
| label | fcIndex (const label i) const |
| Return the forward circular index, i.e. the next index. More... | |
| label | rcIndex (const label i) const |
| Return the reverse circular index, i.e. the previous index. More... | |
| std::streamsize | byteSize () const |
| Return the binary size in number of characters of the UList. More... | |
| const face * | cdata () const |
| Return a const pointer to the first data element,. More... | |
| face * | data () |
| Return a pointer to the first data element,. More... | |
| face & | first () |
| Return the first element of the list. More... | |
| const face & | first () const |
| Return first element of the list. More... | |
| face & | last () |
| Return the last element of the list. More... | |
| const face & | last () const |
| Return the last element of the list. More... | |
| void | checkStart (const label start) const |
| Check start is within valid range (0 ... size-1) More... | |
| void | checkSize (const label size) const |
| Check size is within valid range (0 ... size) More... | |
| void | checkIndex (const label i) const |
| Check index i is within valid range (0 ... size-1) More... | |
| void | shallowCopy (const UList< face > &) |
| Copy the pointer held by the given UList. More... | |
| void | deepCopy (const UList< face > &) |
| Copy elements of the given UList. More... | |
| face & | operator[] (const label) |
| Return element of UList. More... | |
| const face & | operator[] (const label) const |
| Return element of constant UList. More... | |
| const bool & | operator[] (const label i) const |
| operator const Foam::List< face > & () const | |
| Allow cast to a const List<T>&. More... | |
| iterator | begin () |
| Return an iterator to begin traversing the UList. More... | |
| const_iterator | begin () const |
| Return const_iterator to begin traversing the constant UList. More... | |
| iterator | end () |
| Return an iterator to end traversing the UList. More... | |
| const_iterator | end () const |
| Return const_iterator to end traversing the constant UList. More... | |
| const_iterator | cbegin () const |
| Return const_iterator to begin traversing the constant UList. More... | |
| const_iterator | cend () const |
| Return const_iterator to end traversing the constant UList. More... | |
| reverse_iterator | rbegin () |
| Return reverse_iterator to begin reverse traversing the UList. More... | |
| const_reverse_iterator | rbegin () const |
| Return const_reverse_iterator to begin reverse traversing the UList. More... | |
| reverse_iterator | rend () |
| Return reverse_iterator to end reverse traversing the UList. More... | |
| const_reverse_iterator | rend () const |
| Return const_reverse_iterator to end reverse traversing the UList. More... | |
| const_reverse_iterator | crbegin () const |
| Return const_reverse_iterator to begin reverse traversing the UList. More... | |
| const_reverse_iterator | crend () const |
| Return const_reverse_iterator to end reverse traversing the UList. More... | |
| label | size () const |
| Return the number of elements in the UList. More... | |
| label | max_size () const |
| Return size of the largest possible UList. More... | |
| bool | empty () const |
| Return true if the UList is empty (ie, size() is zero) More... | |
| void | swap (UList< face > &) |
| Swap two ULists of the same type in constant time. More... | |
| bool | operator== (const UList< face > &) const |
| Equality operation on ULists of the same type. More... | |
| bool | operator!= (const UList< face > &) const |
| The opposite of the equality operation. Takes linear time. More... | |
| bool | operator< (const UList< face > &) const |
| Compare two ULists lexicographically. Takes linear time. More... | |
| bool | operator> (const UList< face > &) const |
| Compare two ULists lexicographically. Takes linear time. More... | |
| bool | operator<= (const UList< face > &) const |
| Return true if !(a > b). Takes linear time. More... | |
| bool | operator>= (const UList< face > &) const |
| Return true if !(a < b). Takes linear time. More... | |
Static Public Member Functions | |
| static void | write (const fileName &, const surfMesh &) |
| Write to file. More... | |
| Static Public Member Functions inherited from regIOobject | |
| template<class Type > | |
| static Type & | store (Type *) |
| Transfer ownership of the given object pointer to its registry. More... | |
| template<class Type > | |
| static Type & | store (autoPtr< Type > &) |
| Transfer ownership of the given object pointer to its registry. More... | |
| Static Public Member Functions inherited from IOobject | |
| static bool | fileNameComponents (const fileName &path, fileName &instance, fileName &local, word &name) |
| Split path into instance, local, name components. More... | |
| template<class Name > | |
| static word | groupName (Name name, const word &group) |
| static word | group (const word &name) |
| Return group (extension part of name) More... | |
| static word | member (const word &name) |
| Return member (name without the extension) More... | |
| template<class Name > | |
| static word | modelName (Name name, const word &model) |
| Return the name of the object within the given model. More... | |
| template<class Stream > | |
| static Stream & | writeBanner (Stream &os, bool noHint=false) |
| Write the standard OpenFOAM file/dictionary banner. More... | |
| template<class Stream > | |
| static Stream & | writeDivider (Stream &os) |
| Write the standard file section divider. More... | |
| template<class Stream > | |
| static Stream & | writeEndDivider (Stream &os) |
| Write the standard end file divider. More... | |
| Static Public Member Functions inherited from HashTableCore | |
| static label | canonicalSize (const label) |
| Return a canonical (power-of-two) size. More... | |
| static iteratorEnd | cend () |
| iteratorEnd set to beyond the end of any HashTable More... | |
| static iteratorEnd | end () |
| iteratorEnd set to beyond the end of any HashTable More... | |
| Static Public Member Functions inherited from UList< face > | |
| static const UList< face > & | null () |
| Return a null UList. More... | |
Static Public Attributes | |
| static word | meshSubDir = "surfMesh" |
| Return the mesh sub-directory name (normally "surfMesh") More... | |
| Static Public Attributes inherited from surfaceRegistry | |
| static const word | prefix |
| The prefix to local: surfaces. More... | |
| static word | defaultName |
| The default surface name: default. More... | |
| Static Public Attributes inherited from regIOobject | |
| static float | fileModificationSkew |
| Static Public Attributes inherited from IOobject | |
| static constexpr const char * | foamFile = "FoamFile" |
| Keyword for the FoamFile header sub-dictionary. More... | |
| static const NamedEnum< fileCheckTypes, 4 > | fileCheckTypesNames |
| static fileCheckTypes | fileModificationChecking |
| Type of file modification checking. More... | |
| Static Public Attributes inherited from HashTableCore | |
| static const label | maxTableSize |
| Maximum allowable table size. More... | |
Protected Member Functions | |
| pointField & | storedPoints () |
| Non-const access to global points. More... | |
| faceList & | storedFaces () |
| Non-const access to the faces. More... | |
| surfZoneList & | storedZones () |
| Non-const access to the zones. More... | |
| virtual void | updateFacesRef () |
| Update references to storedFaces. More... | |
| virtual void | updatePointsRef () |
| Update references to storedPoints. More... | |
| virtual void | updateRefs () |
| Update references to storedPoints/storedFaces. More... | |
| Protected Member Functions inherited from regIOobject | |
| bool | readHeaderOk (const IOstream::streamFormat defaultFormat, const word &typeName) |
| Read header, check readOpt flags and read data if necessary. More... | |
| Protected Member Functions inherited from IOobject | |
| void | setBad (const string &) |
| Set the object state to bad. More... | |
| template<class Type > | |
| bool | typeHeaderOk (const bool checkType) |
| Read header using typeGlobalFile to find file. More... | |
Friends | |
| template<class Face > | |
| class | MeshedSurface |
| template<class Face > | |
| class | UnsortedMeshedSurface |
A surface mesh consisting of general polygon faces.
Definition at line 55 of file surfMesh.H.
Definition at line 127 of file surfMesh.H.
| typedef bool BoundaryMesh |
Placeholder only, but do not remove - it is needed for GeoMesh.
Definition at line 130 of file surfMesh.H.
| enum readUpdateState |
Enumeration defining the state of the mesh after a read update.
Used for post-processing applications, where the mesh needs to update based on the files written in time directories
| Enumerator | |
|---|---|
| UNCHANGED | |
| POINTS_MOVED | |
| TOPO_CHANGE | |
| TOPO_PATCH_CHANGE | |
Definition at line 72 of file surfMesh.H.
Construct from IOobject, with alternative surface name.
Definition at line 100 of file surfMesh.C.
Referenced by surfMesh::surfMesh().
| surfMesh | ( | const IOobject & | io, |
| pointField && | pointLst, | ||
| faceList && | faceLst, | ||
| const word & | surfName = "" |
||
| ) |
Construct by transferring components (points, faces) without zones.
surfZones are added using addZones() member function
Definition at line 138 of file surfMesh.C.
References surfMesh::surfMesh().
| surfMesh | ( | const IOobject & | io, |
| MeshedSurface< face > && | surf, | ||
| const word & | surfName = "" |
||
| ) |
Construct copy/move from MeshedSurface.
Definition at line 184 of file surfMesh.C.
References IOobject::db(), objectRegistry::dbDir(), Foam::endl(), Foam::Info, IOobject::instance(), IOobject::local(), IOobject::name(), Foam::nl, Foam::notNull(), IOobject::path(), and surfMesh::transfer().
|
virtual |
Destructor.
Definition at line 247 of file surfMesh.C.
References surfMesh::resetPrimitives().
|
inlineprotected |
Non-const access to global points.
Definition at line 96 of file surfMesh.H.
References MeshedSurfaceIOAllocator::storedIOPoints().
Referenced by MeshedSurface< Foam::face >::MeshedSurface().
|
inlineprotected |
Non-const access to the faces.
Definition at line 102 of file surfMesh.H.
References MeshedSurfaceIOAllocator::storedIOFaces().
Referenced by MeshedSurface< Foam::face >::MeshedSurface(), and surfMesh::readUpdate().
|
inlineprotected |
Non-const access to the zones.
Definition at line 108 of file surfMesh.H.
References MeshedSurfaceIOAllocator::storedIOZones(), surfMesh::updateFacesRef(), surfMesh::updatePointsRef(), and surfMesh::updateRefs().
Referenced by MeshedSurface< Foam::face >::MeshedSurface(), and surfMesh::removeZones().
|
protectedvirtual |
Update references to storedFaces.
Definition at line 84 of file surfMesh.C.
Referenced by surfMesh::storedZones().
|
protectedvirtual |
Update references to storedPoints.
Definition at line 74 of file surfMesh.C.
References points.
Referenced by surfMesh::storedZones().
|
protectedvirtual |
Update references to storedPoints/storedFaces.
Definition at line 91 of file surfMesh.C.
Referenced by surfMesh::resetPrimitives(), surfMesh::storedZones(), and surfMesh::transfer().
| TypeName | ( | "surfMesh" | ) |
Runtime type information.
| Foam::fileName meshDir | ( | ) | const |
Return the local mesh directory (dbDir()/meshSubDir)
Definition at line 293 of file surfMesh.C.
References objectRegistry::dbDir(), and surfMesh::meshSubDir.
Referenced by surfMesh::readUpdate().
| const Foam::fileName & pointsInstance | ( | ) | const |
Return the current instance directory for points.
Used in the construction of geometric mesh data dependent on points
Definition at line 299 of file surfMesh.C.
References IOobject::instance(), and MeshedSurfaceIOAllocator::storedIOPoints().
Referenced by surfMesh::readUpdate().
| const Foam::fileName & facesInstance | ( | ) | const |
Return the current instance directory for faces.
Definition at line 305 of file surfMesh.C.
References IOobject::instance(), and MeshedSurfaceIOAllocator::storedIOFaces().
Referenced by surfMesh::readUpdate().
| void setInstance | ( | const fileName & | inst | ) |
Set the instance for mesh files.
Definition at line 31 of file surfMeshIO.C.
References IOobject::AUTO_WRITE, Foam::endl(), InfoInFunction, IOobject::instance(), MeshedSurfaceIOAllocator::storedIOFaces(), MeshedSurfaceIOAllocator::storedIOPoints(), MeshedSurfaceIOAllocator::storedIOZones(), and IOobject::writeOpt().
Referenced by surfMesh::readUpdate().
|
virtual |
Return the number of raw points.
Definition at line 311 of file surfMesh.C.
References surfMesh::points(), and List< T >::size().
Referenced by surfPointGeoMesh::size().
|
virtual |
Return the number of raw faces.
Definition at line 317 of file surfMesh.C.
References surfMesh::faces(), and List< T >::size().
Referenced by surfMesh::checkZones(), surfGeoMesh::size(), and surfMesh::size().
|
inlinevirtual |
Return number of faces.
Definition at line 198 of file surfMesh.H.
References surfMesh::faces(), surfMesh::nFaces(), and surfMesh::points().
Referenced by surfMesh::checkZones().
|
virtual |
Return points.
Definition at line 323 of file surfMesh.C.
References MeshedSurfaceIOAllocator::storedIOPoints().
Referenced by MeshedSurface< Foam::face >::MeshedSurface(), surfMesh::nPoints(), surfMesh::resetPrimitives(), surfMesh::size(), and surfMesh::write().
|
virtual |
Return faces.
Definition at line 329 of file surfMesh.C.
References MeshedSurfaceIOAllocator::storedIOFaces().
Referenced by MeshedSurface< Foam::face >::MeshedSurface(), surfMesh::nFaces(), surfMesh::resetPrimitives(), surfMesh::size(), and surfMesh::write().
|
inlinevirtual |
Return surface zones.
Definition at line 211 of file surfMesh.H.
References surfMesh::addZones(), surfMesh::checkZones(), surfMesh::clearAddressing(), surfMesh::clearGeom(), surfMesh::clearOut(), surfMesh::clearPrimitives(), surfMesh::operator=(), surfMesh::readUpdate(), surfMesh::removeFiles(), surfMesh::removeZones(), surfMesh::resetPrimitives(), MeshedSurfaceIOAllocator::storedIOZones(), surfMesh::transfer(), validate(), surfMesh::write(), and regIOobject::write().
Referenced by MeshedSurface< Foam::face >::MeshedSurface(), and surfMesh::write().
| void checkZones | ( | ) |
Check the surface zone definitions.
Definition at line 335 of file surfMesh.C.
References surfMesh::addZones(), Foam::count(), Foam::endl(), Foam::exit(), Foam::FatalError, FatalErrorInFunction, forAll, UList< T >::last(), surfMesh::nFaces(), surfMesh::removeZones(), List< T >::size(), surfMesh::size(), MeshedSurfaceIOAllocator::storedIOZones(), and WarningInFunction.
Referenced by surfMesh::addZones(), surfMesh::resetPrimitives(), and surfMesh::surfZones().
Add surface zones.
Definition at line 375 of file surfMesh.C.
References surfMesh::checkZones(), forAll, and MeshedSurfaceIOAllocator::storedIOZones().
Referenced by surfMesh::checkZones(), and surfMesh::surfZones().
|
virtual |
Update the mesh based on the mesh files saved in.
time directories
Definition at line 51 of file surfMeshIO.C.
References surfMesh::clearGeom(), surfMesh::clearOut(), Foam::endl(), surfMesh::facesInstance(), forAll, Foam::Info, InfoInFunction, IOobject::instance(), surfMesh::meshDir(), surfMesh::meshSubDir, IOobject::MUST_READ, IOobject::name(), Foam::nl, IOobject::NO_WRITE, surfMesh::POINTS_MOVED, surfMesh::pointsInstance(), surfMesh::setInstance(), List< T >::size(), surfMesh::storedFaces(), MeshedSurfaceIOAllocator::storedIOPoints(), MeshedSurfaceIOAllocator::storedIOZones(), objectRegistry::time(), surfMesh::TOPO_CHANGE, surfMesh::TOPO_PATCH_CHANGE, List< T >::transfer(), surfMesh::UNCHANGED, and WarningInFunction.
Referenced by surfMesh::surfZones().
| void removeZones | ( | ) |
Update the mesh corresponding to given map.
Remove surface zones
Definition at line 32 of file surfMeshClear.C.
References List< T >::clear(), surfMesh::clearOut(), Foam::endl(), InfoInFunction, and surfMesh::storedZones().
Referenced by surfMesh::checkZones(), and surfMesh::surfZones().
| void resetPrimitives | ( | pointField && | points, |
| faceList && | faces, | ||
| surfZoneList && | zones, | ||
| const bool | validate = true |
||
| ) |
Reset mesh primitive data.
Definition at line 257 of file surfMesh.C.
References surfMesh::checkZones(), PrimitivePatch<::Foam::UList< face >, ::Foam::SubField< point > >::clearGeom(), surfMesh::faces(), surfMesh::points(), MeshedSurfaceIOAllocator::reset(), surfMesh::transfer(), and surfMesh::updateRefs().
Referenced by surfMesh::surfZones(), and surfMesh::~surfMesh().
| void transfer | ( | MeshedSurface< face > & | surf | ) |
Transfer the contents of the argument and annul the argument.
Definition at line 278 of file surfMesh.C.
References PrimitivePatch<::Foam::UList< face >, ::Foam::SubField< point > >::clearGeom(), MeshedSurface< Face >::storedFaces(), MeshedSurfaceIOAllocator::storedIOFaces(), MeshedSurfaceIOAllocator::storedIOPoints(), MeshedSurfaceIOAllocator::storedIOZones(), MeshedSurface< Face >::storedPoints(), MeshedSurface< Face >::storedZones(), List< T >::transfer(), and surfMesh::updateRefs().
Referenced by surfMesh::resetPrimitives(), surfMesh::surfMesh(), and surfMesh::surfZones().
Write to file.
Definition at line 410 of file surfMesh.C.
References surfMesh::faces(), surfMesh::points(), and surfMesh::surfZones().
Referenced by surfMesh::surfZones(), and surfMesh::write().
| void write | ( | const fileName & | name | ) |
Write to file.
Definition at line 421 of file surfMesh.C.
References surfMesh::write().
| void clearGeom | ( | ) |
Clear geometry.
Definition at line 48 of file surfMeshClear.C.
References PrimitivePatch<::Foam::UList< face >, ::Foam::SubField< point > >::clearGeom(), Foam::endl(), and InfoInFunction.
Referenced by surfMesh::clearOut(), surfMesh::readUpdate(), and surfMesh::surfZones().
| void clearAddressing | ( | ) |
Clear addressing.
Definition at line 59 of file surfMeshClear.C.
References PrimitivePatch<::Foam::UList< face >, ::Foam::SubField< point > >::clearPatchMeshAddr(), Foam::endl(), and InfoInFunction.
Referenced by surfMesh::clearOut(), and surfMesh::surfZones().
| void clearOut | ( | ) |
Clear all geometry and addressing unnecessary for CFD.
Definition at line 70 of file surfMeshClear.C.
References surfMesh::clearAddressing(), and surfMesh::clearGeom().
Referenced by surfMesh::readUpdate(), surfMesh::removeZones(), and surfMesh::surfZones().
| void clearPrimitives | ( | ) |
Clear primitive data (points, faces and cells)
Referenced by surfMesh::surfZones().
| void removeFiles | ( | const fileName & | instanceDir | ) | const |
Remove all files from mesh instance.
Definition at line 395 of file surfMesh.C.
References IOobject::db(), surfMesh::meshSubDir, objectRegistry::path(), and Foam::rm().
| void removeFiles | ( | ) | const |
Remove all files from mesh instance()
Definition at line 404 of file surfMesh.C.
References IOobject::instance().
Referenced by surfMesh::surfZones().
Disallow default bitwise assignment.
Referenced by surfMesh::surfZones().
|
friend |
Definition at line 62 of file surfMesh.H.
|
friend |
Definition at line 63 of file surfMesh.H.
|
static |
Return the mesh sub-directory name (normally "surfMesh")
Definition at line 137 of file surfMesh.H.
Referenced by edgeMeshFormatsCore::getLineNoComment(), surfaceFormatsCore::getLineNoComment(), surfMesh::meshDir(), surfMesh::readUpdate(), and surfMesh::removeFiles().
1.8.13 
