slidingInterface.H

Go to the documentation of this file.

/*---------------------------------------------------------------------------*\
  =========                 |
  \\      /  F ield         | OpenFOAM: The Open Source CFD Toolbox
   \\    /   O peration     |
    \\  /    A nd           | Copyright (C) 2011 OpenFOAM Foundation
     \\/     M anipulation  |
-------------------------------------------------------------------------------
License
    This file is part of OpenFOAM.

    OpenFOAM is free software: you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    OpenFOAM is distributed in the hope that it will be useful, but WITHOUT
    ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.

    You should have received a copy of the GNU General Public License
    along with OpenFOAM.  If not, see <http://www.gnu.org/licenses/>.

Class
    Foam::slidingInterface

Description
    Sliding interface mesh modifier.  Given two face zones, couple the
    master and slave side using a cutting procedure.

    The coupled faces are collected into the "coupled" zone and can become
    either internal or placed into a master and slave coupled zone.  The
    remaining faces (uncovered master or slave) are placed into the master
    and slave patch.

    The definition of the sliding interface can be either integral or partial.
    Integral interface implies that the slave side completely covers
    the master (i.e. no faces are uncovered); partial interface
    implies that the uncovered part of master/slave face zone should
    become boundary faces.

SourceFiles
    slidingInterface.C
    coupleSlidingInterface.C
    decoupleSlidingInterface.C
    slidingInterfaceProjectPoints.C
    slidingInterfaceAttachedAddressing.C
    slidingInterfaceClearCouple.C

\*---------------------------------------------------------------------------*/

#ifndef slidingInterface_H
#define slidingInterface_H

#include "polyMeshModifier.H"
#include "primitiveFacePatch.H"
#include "polyPatchID.H"
#include "ZoneIDs.H"
#include "intersection.H"
#include "Pair.H"
#include "objectHit.H"

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

namespace Foam
{

/*---------------------------------------------------------------------------*\
                      Class slidingInterface Declaration
\*---------------------------------------------------------------------------*/

class slidingInterface
:
    public polyMeshModifier
{
public:

    // Public enumerations

        //- Type of match
        enum typeOfMatch
        {
            INTEGRAL,
            PARTIAL
        };

        //- Direction names
        static const NamedEnum<typeOfMatch, 2> typeOfMatchNames_;

private:

    // Private data

        //- Master face zone ID
        faceZoneID masterFaceZoneID_;

        //- Slave face zone ID
        faceZoneID slaveFaceZoneID_;

        //- Cut point zone ID
        pointZoneID cutPointZoneID_;

        //- Cut face zone ID
        faceZoneID cutFaceZoneID_;

        //- Master patch ID
        polyPatchID masterPatchID_;

        //- Slave patch ID
        polyPatchID slavePatchID_;

        //- Type of match
        const typeOfMatch matchType_;

        //- Couple-decouple operation.
        //  If the interface is coupled, decouple it and vice versa.
        //  Used in conjuction with automatic mesh motion
        mutable Switch coupleDecouple_;

        //- State of the modifier
        mutable Switch attached_;

        //- Point projection algorithm
        intersection::algorithm projectionAlgo_;

        //- Trigger topological change
        mutable bool trigger_;

        // Tolerances. Initialised to static ones below.

            //- Point merge tolerance
            scalar pointMergeTol_;

            //- Edge merge tolerance
            scalar edgeMergeTol_;

            //- Estimated number of faces an edge goes through
            label nFacesPerSlaveEdge_;

            //- Edge-face interaction escape limit
            label edgeFaceEscapeLimit_;

            //- Integral match point adjustment tolerance
            scalar integralAdjTol_;

            //- Edge intersection master catch fraction
            scalar edgeMasterCatchFraction_;

            //- Edge intersection co-planar tolerance
            scalar edgeCoPlanarTol_;

            //- Edge end cut-off tolerance
            scalar edgeEndCutoffTol_;


        // Private addressing data.

            //- Cut face master face.  Gives the index of face in master patch
            //  the cut face has been created from.  For a slave-only face
            //  this will be -1
            mutable labelList* cutFaceMasterPtr_;

            //- Cut face slave face.  Gives the index of face in slave patch
            //  the cut face has been created from.  For a master-only face
            //  this will be -1
            mutable labelList* cutFaceSlavePtr_;

            //- Master zone faceCells
            mutable labelList* masterFaceCellsPtr_;

            //- Slave zone faceCells
            mutable labelList* slaveFaceCellsPtr_;

            //- Master stick-out faces
            mutable labelList* masterStickOutFacesPtr_;

            //- Slave stick-out faces
            mutable labelList* slaveStickOutFacesPtr_;

            //- Retired point mapping.
            //  For every retired slave side point, gives the label of the
            //  master point that replaces it
            mutable Map<label>* retiredPointMapPtr_;

            //- Cut edge pairs
            //  For cut points created by intersection two edges,
            //  store the master-slave edge pair used in creation
            mutable Map<Pair<edge> >* cutPointEdgePairMapPtr_;

            //- Slave point hit.  The index of master point hit by the
            //  slave point in projection.  For no point hit, set to -1
            mutable labelList* slavePointPointHitsPtr_;

            //- Slave edge hit.  The index of master edge hit by the
            //  slave point in projection.  For point or no edge  hit, set to -1
            mutable labelList* slavePointEdgeHitsPtr_;

            //- Slave face hit.  The index of master face hit by the
            //  slave point in projection.
            mutable List<objectHit>* slavePointFaceHitsPtr_;

            //- Master point edge hit.  The index of slave edge hit by
            //  a master point.  For no hit set to -1
            mutable labelList* masterPointEdgeHitsPtr_;

            //- Projected slave points
            mutable pointField* projectedSlavePointsPtr_;


    // Private Member Functions

        //- Disallow default bitwise copy construct
        slidingInterface(const slidingInterface&);

        //- Disallow default bitwise assignment
        void operator=(const slidingInterface&);

        //- Clear out
        void clearOut() const;


        //- Check validity of construction data
        void checkDefinition();

        //- Calculate attached addressing
        void calcAttachedAddressing() const;

        //- Calculate decoupled zone face-cell addressing
        void renumberAttachedAddressing(const mapPolyMesh&) const;

        //- Clear attached addressing
        void clearAttachedAddressing() const;


        // Topological changes

            //- Master faceCells
            const labelList& masterFaceCells() const;

            //- Slave faceCells
            const labelList& slaveFaceCells() const;

            //- Master stick-out faces
            const labelList& masterStickOutFaces() const;

            //- Slave stick-out faces
            const labelList& slaveStickOutFaces() const;

            //- Retired point map
            const Map<label>& retiredPointMap() const;

            //- Cut point edge pair map
            const Map<Pair<edge> >& cutPointEdgePairMap() const;

             //- Clear addressing
             void clearAddressing() const;

            //- Project slave points and compare with the current projection.
            //  If the projection has changed, the sliding interface
            //  changes topologically
            bool projectPoints() const;

            //- Couple sliding interface
            void coupleInterface(polyTopoChange& ref) const;

            //- Clear projection
            void clearPointProjection() const;

            //- Clear old couple
            void clearCouple(polyTopoChange& ref) const;

            //- Decouple interface (returns it to decoupled state)
            //  Note: this should not be used in normal operation of the
            //  sliding mesh, but only to return the mesh to its
            //  original state
            void decoupleInterface(polyTopoChange& ref) const;


    // Static data members

        //- Point merge tolerance
        static const scalar pointMergeTolDefault_;

        //- Edge merge tolerance
        static const scalar edgeMergeTolDefault_;

        //- Estimated number of faces an edge goes through
        static const label nFacesPerSlaveEdgeDefault_;

        //- Edge-face interaction escape limit
        static const label edgeFaceEscapeLimitDefault_;

        //- Integral match point adjustment tolerance
        static const scalar integralAdjTolDefault_;

        //- Edge intersection master catch fraction
        static const scalar edgeMasterCatchFractionDefault_;

        //- Edge intersection co-planar tolerance
        static const scalar edgeCoPlanarTolDefault_;

        //- Edge end cut-off tolerance
        static const scalar edgeEndCutoffTolDefault_;


public:

    //- Runtime type information
    TypeName("slidingInterface");


    // Constructors

        //- Construct from components
        slidingInterface
        (
            const word& name,
            const label index,
            const polyTopoChanger& mme,
            const word& masterFaceZoneName,
            const word& slaveFaceZoneName,
            const word& cutPointZoneName,
            const word& cutFaceZoneName,
            const word& masterPatchName,
            const word& slavePatchName,
            const typeOfMatch tom,
            const bool coupleDecouple = false,
            const intersection::algorithm algo = intersection::VISIBLE
        );

        //- Construct from dictionary
        slidingInterface
        (
            const word& name,
            const dictionary& dict,
            const label index,
            const polyTopoChanger& mme
        );


    //- Destructor
    virtual ~slidingInterface();


    // Member Functions

        //- Return master face zone ID
        const faceZoneID& masterFaceZoneID() const;

        //- Return slave face zone ID
        const faceZoneID& slaveFaceZoneID() const;

        //- Return true if attached
        bool attached() const
        {
            return attached_;
        }

        //- Check for topology change
        virtual bool changeTopology() const;

        //- Insert the layer addition/removal instructions
        //  into the topological change
        virtual void setRefinement(polyTopoChange&) const;

        //- Modify motion points to comply with the topological change
        virtual void modifyMotionPoints(pointField& motionPoints) const;

        //- Force recalculation of locally stored data on topological change
        virtual void updateMesh(const mapPolyMesh&);

        //- Return projected points for a slave patch
        const pointField& pointProjection() const;

        //- Set the tolerances from the values in a dictionary
        void setTolerances(const dictionary&, bool report=false);

        //- Write
        virtual void write(Ostream&) const;

        //- Write dictionary
        virtual void writeDict(Ostream&) const;
};


// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

} // End namespace Foam

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

#endif

// ************************************************************************* //